74VHC245FT
Toshiba Semiconductor và lưu trữ
- Lifecycle
- Active
- Stock
- 4188 PCS
- Package
- TSSOP-20
- Series
- Logic - Buffers, Drivers, Receivers, Transceivers
Bảng so sánh chi tiết giữa 74VHC245FT và 74VHCT374AMTC cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The 74VHC245FT and 74VHCT374AMTC are not functionally interchangeable. The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, while the 74VHCT374AMTC is an octal D-type flip-flop with 3-state outputs. They differ in logic function, control architecture, package type, and pinout, making direct substitution impossible without circuit redesign.
Toshiba Semiconductor và lưu trữ
onsemi
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74VHC245FT | 74VHCT374AMTC | Why it matters |
|---|---|---|---|
| Logic Function | Octal Bus Transceiver, 3-state | Octal D-Type Flip-Flop, 3-state | These are fundamentally different logic functions; a transceiver passes data bidirectionally while a flip-flop latches data on a clock edge, so they are not functionally interchangeable. |
| Logic Family | VHC (Very High Speed CMOS) | VHCT (VHC with TTL-compatible inputs) | VHCT inputs are TTL-level compatible while VHC inputs are CMOS-level; this affects direct interfacing with 5 V TTL logic without level shifting. |
| Direction / Data Flow | Bidirectional (A to B or B to A) | Unidirectional (D to Q, clocked) | Bidirectional capability versus clocked unidirectional storage determines whether the device can be used for bus steering or for registered data storage. |
| Clock Requirement | None (combinational) | Edge-triggered clock required | A clocked device synchronizes data transfer to a clock edge, whereas a combinational transceiver responds immediately to inputs, changing timing behavior in a system. |
| Number of Channels | 8 | 8 | Both provide eight data paths, so channel count alone does not differentiate them, but the function of each channel differs. |
| Output Type | 3-state | 3-state | Both support high-impedance output states for bus sharing, which is important for multiplexed bus architectures. |
| Supply Voltage Range | 2.0 V to 5.5 V | 4.5 V to 5.5 V | The wider supply range of the VHC device allows operation at lower voltages, while the VHCT device is restricted to 5 V systems. |
| Propagation Delay (typical) | ~3.5 ns at 5 V | ~6.5 ns at 5 V (clock to Q) | Different propagation delays affect timing margins and maximum operating frequency in synchronous designs. |
| Package | TSSOP-20 | TSSOP-20 | Identical package and pin count simplify PCB footprint compatibility, though pin functions differ. |
| Input Compatibility | CMOS-level inputs | TTL-level compatible inputs | TTL-compatible inputs allow direct connection to 5 V TTL outputs, while CMOS-level inputs may require level shifting in mixed-logic systems. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74VHC245FT | 74VHCT374AMTC |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,onsemi |
| Series | 74VHC | 74VHCT |
| Part Status | Active | Obsolete |
| Function | - | Standard |
| Type | - | D-Type |
| Output Type | 3-State | Tri-State, Non-Inverted |
| Number of Elements | 1 | 1 |
| Number of Bits per Element | 8 | 8 |
| Clock Frequency | - | 130 MHz |
| Max Propagation Delay @ V Max CL | - | 10.4ns @ 5V, 50pF |
| Trigger Type | - | Positive Edge |
| Current - Output High Low | 8mA, 8mA | 8mA, 8mA |
| Voltage - Supply | 2V ~ 5.5V | 4.5V ~ 5.5V |
| Current - Quiescent (Iq) | - | 4 µA |
| Input Capacitance | - | 4 pF |
| Operating Temperature | -40°C ~ 125°C (TA) | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Logic Type | Transceiver, Non-Inverting | - |
The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, designed for asynchronous two-way data transfer. The 74VHCT374AMTC is an octal D-type flip-flop with 3-state outputs, providing edge-triggered storage of data on the rising edge of the clock. The 74VHC245FT is a combinational bus interface device, while the 74VHCT374AMTC is a sequential logic register.
No. The 74VHC245FT is typically supplied in a TSSOP-20 package, while the 74VHCT374AMTC is supplied in a TSSOP-20 package as well, but their pin functions differ. The 74VHC245FT has direction control (DIR) and output enable (OE) pins, whereas the 74VHCT374AMTC has clock (CP) and output enable (OE) pins. They are not direct drop-in replacements.
Yes. Both devices are specified for operation over a 2.0 V to 5.5 V supply voltage range. However, the 74VHCT374AMTC is a VHCT-family device with TTL-compatible input thresholds, while the 74VHC245FT is a VHC-family device with CMOS-compatible input thresholds. This affects logic-level compatibility with upstream drivers.
The 74VHC245FT (VHC family) has CMOS input thresholds, typically 0.7 × VCC for a high input and 0.3 × VCC for a low input. The 74VHCT374AMTC (VHCT family) has TTL-compatible input thresholds, typically 2.0 V for a high input and 0.8 V for a low input, independent of VCC within the specified range. This makes the 74VHCT374AMTC suitable for interfacing with TTL logic levels.
Yes. The 74VHC245FT has 3-state outputs controlled by the OE pin, allowing the outputs to be placed in a high-impedance state for bus sharing. The 74VHCT374AMTC also has 3-state outputs controlled by the OE pin, enabling the register outputs to be disconnected from the bus.
The 74VHC245FT is specifically designed for bus-oriented bidirectional data transmission, with direction control and non-inverting 3-state outputs. The 74VHCT374AMTC is intended for registered data storage and is not a bidirectional transceiver. For pure bus transceiver applications, the 74VHC245FT is the appropriate choice.
The 74VHC245FT typically has a propagation delay (tPD) of approximately 3.5 ns at 5.0 V. The 74VHCT374AMTC typically has a propagation delay from clock to output (tPHL/tPLH) of approximately 5.0 ns at 5.0 V. Exact values depend on load conditions and supply voltage, and should be verified from the respective manufacturer datasheets.
Both devices are commonly offered in TSSOP-20 packages. However, the 74VHC245FT may also be available in other packages such as SOIC-20 or DQFN, while the 74VHCT374AMTC is typically offered in TSSOP-20 and SOIC-20. Package availability should be confirmed with the specific manufacturer or distributor.