74VHC245FT vs 74VHCT574AMTC

Bảng so sánh chi tiết giữa 74VHC245FT và 74VHCT574AMTC cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74VHC245FT and 74VHCT574AMTC are functionally incompatible devices that cannot serve as substitutes for one another. The 74VHC245FT is an octal bidirectional bus transceiver with dual enable control, while the 74VHCT574AMTC is an octal D-type flip-flop with 3-state outputs and edge-triggered clocking. They differ in logic function, control architecture, pinout, and package type, making direct replacement impossible without circuit redesign.

Different logic function Different control architecture Different pinout Different package type

Parts at a glance

Part A

74VHC245FT

Toshiba Semiconductor và lưu trữ

Lifecycle
Active
Stock
4188 PCS
Package
TSSOP-20
Series
Logic - Buffers, Drivers, Receivers, Transceivers
Part B

74VHCT574AMTC

Công ty bán dẫn Fairchild

Lifecycle
Active
Stock
105 PCS
Series
Logic - Flip Flops

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74VHC245FT 74VHCT574AMTC Why it matters
Logic Function Octal Bus Transceiver, 3-State Octal D-Type Flip-Flop, 3-State These are fundamentally different logic functions; a transceiver cannot substitute for a flip-flop in sequential circuits.
Logic Family VHC (Very High Speed CMOS) VHCT (VHC with TTL-Compatible Inputs) VHCT inputs are TTL-voltage compatible, while VHC inputs are CMOS-level; this affects interfacing with TTL logic.
Input Voltage Compatibility CMOS-level inputs (Vih ~ 0.7 x VCC) TTL-compatible inputs (Vih ~ 2.0 V) TTL compatibility allows direct interfacing with 5 V TTL logic without level shifting.
Number of Bits 8 (octal) 8 (octal) Both handle 8 bits, so bus width is equivalent, but the data flow behavior differs.
Output Type 3-State 3-State Both support high-impedance output for bus sharing, but the control logic differs.
Direction Control Bidirectional (DIR pin) Unidirectional (data flows D to Q on clock edge) Bidirectional capability is essential for bus transceiver applications; flip-flops are unidirectional.
Clock Requirement None (combinational) Edge-triggered clock input Combinational logic responds immediately; flip-flops require a clock edge, changing timing behavior.
Propagation Delay (typical) ~3.5 ns at 5 V ~5.5 ns at 5 V Different delays affect timing margins in high-speed designs.
Supply Voltage Range 2.0 V to 5.5 V 4.5 V to 5.5 V VHC operates over a wider voltage range, while VHCT is limited to 5 V systems.
Package TSSOP-20 TSSOP-20 Same package footprint allows PCB compatibility, but pin functions differ.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74VHC245FT 74VHCT574AMTC
Supplier - Rochester Electronics, LLC
Series 74VHC 74VHCT
Part Status Active Active
Function - Standard
Type - D-Type
Output Type 3-State Tri-State, Non-Inverted
Number of Elements 1 1
Number of Bits per Element 8 8
Clock Frequency - 130 MHz
Max Propagation Delay @ V Max CL - 10.4ns @ 5V, 50pF
Trigger Type - Positive Edge
Current - Output High Low 8mA, 8mA 8mA, 8mA
Voltage - Supply 2V ~ 5.5V 4.5V ~ 5.5V
Current - Quiescent (Iq) - 4 µA
Input Capacitance - 4 pF
Operating Temperature -40°C ~ 125°C (TA) -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount
Logic Type Transceiver, Non-Inverting -

Frequently asked questions

What are the primary functional differences between the 74VHC245FT and the 74VHCT574AMTC?

The 74VHC245FT is an octal bidirectional transceiver with 3-state outputs, designed for asynchronous two-way data transfer. The 74VHCT574AMTC is an octal D-type flip-flop with 3-state outputs, providing edge-triggered storage of data. The 74VHC245FT is a combinational bus interface device, while the 74VHCT574AMTC is a sequential logic register.

Are the 74VHC245FT and 74VHCT574AMTC pin-to-pin compatible?

No. The 74VHC245FT is typically supplied in a TSSOP-20 package, while the 74VHCT574AMTC is supplied in a TSSOP-20 package as well, but their pin functions differ. The 74VHC245FT has direction control (DIR) and output enable (OE) pins, whereas the 74VHCT574AMTC has clock (CP), output enable (OE), and data inputs. They are not direct substitutes without circuit redesign.

What are the logic level input thresholds for the 74VHC245FT and 74VHCT574AMTC?

The 74VHC245FT is a VHC-family device with CMOS-level inputs, typically specified with VIH of 2.0 V minimum at VCC = 3.0 V to 5.5 V. The 74VHCT574AMTC is a VHCT-family device with TTL-compatible inputs, typically specified with VIH of 2.0 V minimum and VIL of 0.8 V maximum, allowing direct interfacing with 5 V TTL logic while operating at 5 V VCC.

Can the 74VHC245FT and 74VHCT574AMTC operate at the same supply voltage?

Both devices are specified for operation over a supply voltage range of 2.0 V to 5.5 V, with nominal 3.3 V or 5 V systems. However, the 74VHCT574AMTC is optimized for 5 V TTL-compatible systems, while the 74VHC245FT is optimized for CMOS-level systems. Verify the exact recommended operating conditions in the respective manufacturer datasheets.

What is the maximum operating frequency of the 74VHCT574AMTC compared to the 74VHC245FT?

The 74VHCT574AMTC, as a flip-flop, has a maximum clock frequency typically specified at 185 MHz at VCC = 5.0 V. The 74VHC245FT, as a transceiver, does not have a clock frequency specification; its propagation delay is typically 3.5 ns at VCC = 5.0 V. These parameters are not directly comparable due to different device functions.

What are the output drive capabilities of the 74VHC245FT and 74VHCT574AMTC?

Both devices typically provide ±8 mA output drive at VCC = 5.0 V, with symmetrical source and sink currents. This is consistent with standard VHC and VHCT family specifications. Confirm the exact IOH and IOL ratings from the manufacturer datasheet for the specific package and temperature grade.

Are the 74VHC245FT and 74VHCT574AMTC available in the same package type?

The 74VHC245FT is commonly offered in TSSOP-20, and the 74VHCT574AMTC is also offered in TSSOP-20. However, the internal pin assignments differ, so they cannot be interchanged on the same PCB footprint without layout changes. Always verify the package suffix and mechanical dimensions from the manufacturer datasheet.

Which device is better suited for bus isolation and which for data storage?

The 74VHC245FT is intended for bus isolation, signal buffering, and bidirectional data transfer between two buses. The 74VHCT574AMTC is intended for data storage, synchronization, and edge-triggered registration of parallel data. Selection depends on whether the application requires combinational bus switching or sequential data latching.