AD7495BRZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa AD7495BRZ và AD7492AR-5 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD7495BRZ and AD7492AR-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible functional architecture, making the AD7495BRZ a viable replacement candidate for the AD7492AR-5 in many designs. However, the two parts differ in sampling throughput, analog input configuration, and digital interface timing, so the replacement should be validated against the target application's speed, signal-conditioning, and bus-timing requirements before adoption.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492AR-5 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit ADCs, so quantization accuracy is equivalent for substitutability. |
| Sampling Rate | 1 MSPS | 1.25 MSPS | The AD7492AR-5 offers a higher maximum throughput, which may matter for faster signal acquisition. |
| Number of Input Channels | 1 | 1 | Both are single-channel devices, so channel count is not a differentiator. |
| Input Type | Single-ended | Single-ended | Matching input configuration supports direct functional replacement in single-ended signal chains. |
| Supply Voltage | 5 V | 5 V | Identical supply requirements simplify power-rail compatibility between the two parts. |
| Interface | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel | The interface differs significantly (serial vs parallel), which affects board layout and host controller compatibility. |
| Package / Mounting | 8-Lead SOIC (surface mount) | 24-Lead SOIC (surface mount) | Different package footprints prevent direct drop-in replacement on an existing PCB. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings mean both suit the same industrial operating environments. |
| Power Consumption | Approx. 4.5 mW at 5 V, 1 MSPS | Approx. 15 mW at 5 V, 1.25 MSPS | Lower power in the AD7495BRZ benefits energy-sensitive designs, while the AD7492AR-5 trades power for speed. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492AR-5 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1.25M |
| Data Interface | SPI, DSP | Parallel |
| Number of A/D Converters | 1 | 1 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 1 | - |
| Input Type | Single Ended | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
The AD7495BRZ is a 12-bit successive-approximation ADC with a serial (SPI/QSPI/MICROWIRE/DSP-compatible) interface, supplied in an 8-lead SOIC package, and specified for operation from a single 2.7 V to 5.25 V supply. The AD7492AR-5 is a 12-bit SAR ADC with a parallel interface, supplied in a 24-lead SOIC package, and specified for operation from a single 5 V supply. The primary differences are the digital interface (serial vs. parallel), package/pin count, and supply voltage range.
Yes. Both devices are 12-bit successive-approximation (SAR) analog-to-digital converters, so they share the same resolution and conversion principle. The differences lie in interface, package, and supply specifications rather than in resolution or architecture.
No, not without redesign. The AD7495BRZ uses an 8-lead SOIC package with a serial interface, while the AD7492AR-5 uses a 24-lead SOIC package with a parallel interface. The pin counts, pin functions, package footprints, and host interface requirements differ, so a direct drop-in replacement is not possible.
The AD7495BRZ is specified for a single supply of 2.7 V to 5.25 V. The AD7492AR-5 is specified for a single 5 V supply (the "-5" suffix denotes the 5 V version). Designs must ensure the supply rail matches the respective device specification.
The AD7495BRZ is generally better suited in these cases because it is offered in a compact 8-lead SOIC package and uses a serial interface, which requires fewer host I/O pins than the parallel interface of the AD7492AR-5 in its 24-lead SOIC package.
The AD7492AR-5, with its parallel interface, is generally better suited where the host can accept a full parallel data word per conversion, avoiding the serial shift overhead associated with the AD7495BRZ. The choice should be validated against the timing requirements in the respective manufacturer datasheets.
Both devices are offered in commercial temperature grade versions (0°C to +70°C) as indicated by their respective ordering codes. Designers should confirm the exact operating temperature range for the specific orderable part number against the manufacturer datasheet before use in extended-temperature applications.