AD7656YSTZ vs AD7651AST

Bảng so sánh chi tiết giữa AD7656YSTZ và AD7651AST cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7656YSTZ and AD7651AST are not functionally interchangeable: the AD7656YSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7651AST is a single-channel unipolar ADC in a 48-lead LQFP. The differences in channel count, input configuration, package footprint, and digital interface make direct substitution impractical without a full board and firmware redesign.

Different channel count Different input configuration Different package footprint Different digital interface

Parts at a glance

Part A

AD7656YSTZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
7772 PCS
Package
LQFP-64
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

AD7651AST

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
965 PCS
Package
LQFP-48
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7656YSTZ AD7651AST Why it matters
Number of ADC Channels 6 1 Determines how many independent analog signals can be sampled simultaneously; a 6-channel device cannot be replaced by a single-channel part without redesigning the signal chain.
Resolution 16 bits 16 bits Both provide 16-bit resolution, so precision and dynamic range are equivalent for the sampled signal.
Sampling Rate (max) 250 kSPS 100 kSPS Sets the maximum bandwidth of signals that can be digitized; the higher-rate part supports faster acquisition and wider analog bandwidth.
Input Type Single-ended (true bipolar) Single-ended (unipolar/bipolar) Input configuration must match the sensor or signal source; mismatched input ranges require external level shifting or attenuation.
Interface Parallel / Serial (SPI) Parallel / Serial (SPI) Both support parallel and serial interfaces, so host-side digital connectivity is compatible.
Supply Voltage (analog) 5 V 5 V Analog supply must match the board's power rail; identical 5 V requirement simplifies substitution.
Package 44-Lead LQFP 48-Lead LQFP Footprint and pin count must match for a drop-in replacement; differing packages require PCB redesign.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Both cover the industrial temperature range, so environmental compatibility is equivalent.
Power Consumption (typ) 160 mW 100 mW Affects thermal budget and power supply sizing; the lower-power part may be preferred in power-sensitive designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7656YSTZ AD7651AST
Supplier - Rochester Electronics, LLC
Series iCMOS® PulSAR®
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 250k 100k
Number of A/D Converters 6 1
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Number of Inputs 6 -
Input Type Single Ended -
Data Interface SPI, Parallel, DSP -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -
Features Simultaneous Sampling, True Bipolar -

Frequently asked questions

What are the key differences between the AD7656YSTZ and the AD7651AST?

The AD7656YSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC offering 250 kSPS per channel, while the AD7651AST is a 16-bit, single-channel SAR ADC offering 100 kSPS. The AD7656YSTZ is supplied in a 64-lead LQFP package, whereas the AD7651AST is supplied in a 48-lead LQFP package. They differ in channel count, throughput, package, and intended application scope.

Are the AD7656YSTZ and AD7651AST pin-compatible or drop-in replacements for each other?

No. The AD7656YSTZ uses a 64-lead LQFP package and the AD7651AST uses a 48-lead LQFP package, so they are not pin-compatible and cannot be used as drop-in replacements without a PCB redesign.

What is the resolution and throughput of each device?

Both devices provide 16-bit resolution. The AD7656YSTZ offers 250 kSPS per channel across six simultaneous-sampling channels, while the AD7651AST offers 100 kSPS on a single channel.

How do the input configurations of the AD7656YSTZ and AD7651AST differ?

The AD7656YSTZ provides six independent simultaneous-sampling ADC channels, making it suited to multi-phase or multi-channel acquisition. The AD7651AST provides a single ADC channel, making it suited to single-channel precision measurement.

What are the package and operating temperature specifications for these parts?

The AD7656YSTZ is offered in a 64-lead LQFP package, and the AD7651AST is offered in a 48-lead LQFP package. Both are specified for the industrial temperature range of −40°C to +85°C.

Which device is better suited for simultaneous multi-channel sampling?

The AD7656YSTZ is the appropriate choice for simultaneous multi-channel sampling because it integrates six simultaneous-sampling 16-bit ADCs. The AD7651AST has only one channel and cannot perform simultaneous multi-channel acquisition on its own.

Can the AD7651AST be used where an AD7656YSTZ was originally designed in?

Not directly. Because the AD7651AST has a single channel, lower throughput (100 kSPS vs 250 kSPS per channel), and a different 48-lead LQFP footprint, substituting it for the AD7656YSTZ would require redesign of the acquisition architecture, PCB layout, and firmware.