AD7685BRMZRL7
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4839 PCS
- Package
- MSOP-10
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa AD7685BRMZRL7 và AD7680ARM cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD7685BRMZRL7 and AD7680ARM share a compatible 16-bit SAR architecture and MSOP-10 footprint, but differ in sample rate, supply voltage range, and interface configuration. The AD7685BRMZRL7 offers a higher throughput and wider supply flexibility, while the AD7680ARM provides a lower-power alternative. Designers should validate timing, reference, and digital interface requirements before substituting one for the other in a given application.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7685BRMZRL7 | AD7680ARM | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 16 | Both are 16-bit ADCs, so resolution is equivalent and not a differentiator for substitutability. |
| Sampling Rate (max) | 250 kSPS | 100 kSPS | The AD7685 supports a higher throughput, which matters for faster signal acquisition and wider bandwidth applications. |
| Architecture | SAR | SAR | Both use successive-approximation register architecture, giving similar latency and no pipeline delay characteristics. |
| Input Type | Pseudo-differential | Single-ended | Pseudo-differential inputs reject common-mode noise better, while single-ended is simpler; this affects signal conditioning design. |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Identical supply range means both can operate from the same system rails without level shifting. |
| Interface | SPI / QSPI / MICROWIRE / DSP compatible | SPI / QSPI / MICROWIRE / DSP compatible | Same serial interface compatibility allows drop-in digital connection to most host controllers. |
| Package | 10-lead MSOP | 8-lead MSOP | Different pin counts and footprints mean the PCB layout must be redesigned; they are not footprint-compatible. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings suit the same industrial environments. |
| Power Consumption (typical) | 3.5 mW at 5 V, 250 kSPS | 3.5 mW at 5 V, 100 kSPS | Similar power draw, but the AD7685 delivers higher throughput for comparable energy, affecting efficiency in portable designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7685BRMZRL7 | AD7680ARM |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Series | PulSAR® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 100k |
| Number of Inputs | 1 | 1 |
| Input Type | Pseudo-Differential | Single Ended |
| Data Interface | SPI, DSP | SPI, DSP |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | Supply |
| Voltage - Supply, Analog | 2.3V ~ 5.5V | 2.5V ~ 5.5V |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | 2.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The AD7685BRMZRL7 is a 16-bit, 250 kSPS PulSAR analog-to-digital converter with a pseudo-differential input, while the AD7680ARM is a 16-bit, 100 kSPS successive-approximation ADC with a single-ended input. The AD7685 offers a higher throughput rate and a pseudo-differential input structure, whereas the AD7680 provides a lower sample rate in a smaller MSOP-8 package.
No. The AD7685BRMZRL7 is supplied in a 10-lead MSOP (RM-10) package, while the AD7680ARM is supplied in an 8-lead MSOP (RM-8) package. The differing pin counts and pin functions mean they are not drop-in replacements for one another.
Both devices provide 16-bit resolution. The AD7685BRMZRL7 supports a maximum throughput of 250 kSPS, while the AD7680ARM supports a maximum throughput of 100 kSPS. Designers requiring higher sampling rates should select the AD7685.
The AD7685BRMZRL7 features a pseudo-differential input that accepts a differential signal between IN+ and IN−, with IN− typically tied to a reference level. The AD7680ARM provides a single-ended input referenced to ground. This difference affects signal conditioning and common-mode rejection in the application circuit.
Both the AD7685BRMZRL7 and AD7680ARM use an SPI-compatible serial interface for communication with a host controller. The interface supports daisy-chain and busy-indicator options on the AD7685, while the AD7680 provides a standard serial data output for direct connection to microcontrollers and DSPs.
Both devices operate from a single 2.7 V to 5.5 V analog supply (VDD). The AD7685BRMZRL7 additionally provides a separate VIO supply pin for digital interface levels, allowing direct interfacing to 1.8 V, 2.5 V, 3 V, or 5 V logic. The AD7680ARM does not offer a separate VIO supply.
Both converters are designed for low-power operation. The AD7680ARM, with its lower 100 kSPS throughput and 8-lead package, typically consumes less power at reduced sample rates, making it suitable for space-constrained, low-power designs. The AD7685BRMZRL7 is preferable when higher throughput is required and its power consumption at 250 kSPS is acceptable.
Not directly. The devices differ in package footprint (8-lead vs 10-lead MSOP), input configuration (single-ended vs pseudo-differential), maximum throughput (100 kSPS vs 250 kSPS), and digital supply flexibility. A replacement requires PCB redesign and validation against the target system's accuracy, timing, and interface requirements.