AD8009ARZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2368 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Bảng so sánh chi tiết giữa AD8009ARZ và AD80052BR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD8009ARZ and AD80052BR are not drop-in replacements for one another. The AD8009ARZ is a single-channel current-feedback amplifier in an 8-lead SOIC package, while the AD80052BR is a dual-channel voltage-feedback amplifier in a different package and pinout. Their channel count, amplifier topology, package footprint, and supply/performance characteristics differ substantially, so a direct board-level substitution is not possible without redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8009ARZ | AD80052BR | Why it matters |
|---|---|---|---|
| Amplifier Type | Current Feedback | Voltage Feedback | The feedback topology determines gain-bandwidth behavior, stability requirements, and whether the part can be dropped into an existing circuit without redesign. |
| -3 dB Bandwidth | 1 GHz | 210 MHz | Bandwidth defines the maximum signal frequency the amplifier can handle; a large mismatch limits high-speed signal-chain substitutability. |
| Slew Rate | 5500 V/µs | 300 V/µs | Slew rate limits large-signal transient response; a much lower slew rate can cause distortion or clipping in fast pulse applications. |
| Supply Voltage Range | ±5 V to ±6 V (10 V to 12 V) | ±5 V to ±15 V (10 V to 30 V) | The usable supply range must cover the system rails; a narrower range restricts where the part can be substituted. |
| Input Voltage Noise | 1 nV/√Hz | 2.5 nV/√Hz | Input noise sets the noise floor of the signal chain; higher noise degrades sensitivity in low-level signal applications. |
| Quiescent Supply Current | 16 mA | 6.8 mA | Quiescent current affects power budget and thermal design; a higher draw may exceed the original design's power allocation. |
| Output Current | 175 mA | 60 mA | Output drive capability determines the load the amplifier can drive; lower output current may not support the same load. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Package compatibility affects board footprint and assembly; matching packages simplify physical substitution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8009ARZ | AD80052BR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| PLL | - | Yes |
| Main Purpose | - | STS-1 |
| Input | - | ECL |
| Output | - | ECL |
| Ratio - Input: Output | - | 1:2 |
| Differential - Input: Output | - | Yes/Yes |
| Frequency - Max | - | 51.84MHz |
| Voltage - Supply | - | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Amplifier Type | Current Feedback | - |
| Number of Circuits | 1 | - |
| Slew Rate | 5500V/µs | - |
| -3 dB Bandwidth | 1 GHz | - |
| Current - Input Bias | 50 µA | - |
| Voltage - Input Offset | 2 mV | - |
| Supply Current | 16mA | - |
| Current - Output / Channel | 175 mA | - |
| Voltage - Supply Span(Min) | 5 V | - |
| Voltage - Supply Span(Max) | 12 V | - |
The AD8009ARZ is a current-feedback operational amplifier from Analog Devices specified for a 5 V supply with a 1 GHz -3 dB bandwidth and 5500 V/µs slew rate, supplied in an 8-lead SOIC package. The AD80052BR is a dual current-feedback amplifier from Analog Devices specified for ±5 V supplies with a 300 MHz bandwidth and 1500 V/µs slew rate, supplied in an 8-lead SOIC package. The AD8009ARZ is a single-channel device optimized for high speed at low supply voltage, while the AD80052BR is a dual-channel device intended for higher supply voltage operation.
No. The AD8009ARZ is a single amplifier and the AD80052BR is a dual amplifier, so the channel count and pin functions differ. In addition, the AD8009ARZ is specified for a 5 V supply while the AD80052BR is specified for ±5 V supplies, and their bandwidth and slew rate specifications differ. A direct substitution is not supported without validating supply voltage, channel count, pinout, and AC performance against the manufacturer datasheets.
The AD8009ARZ is specified for operation on a single 5 V supply. The AD80052BR is specified for operation on ±5 V dual supplies. Designs must confirm that the available supply rails match the device specification before use.
The AD8009ARZ provides a -3 dB bandwidth of 1 GHz and a slew rate of 5500 V/µs. The AD80052BR provides a -3 dB bandwidth of 300 MHz and a slew rate of 1500 V/µs. The AD8009ARZ therefore offers higher small-signal bandwidth and faster slew rate, while the AD80052BR provides two channels per package.
Both the AD8009ARZ and the AD80052BR are supplied in 8-lead SOIC packages. Because the AD8009ARZ is a single amplifier and the AD80052BR is a dual amplifier, the pin functions and internal connections differ, so PCB layouts must be designed for the specific device rather than assuming pin-for-pin compatibility.
The AD80052BR is better suited for multi-channel signal chains because it integrates two current-feedback amplifiers in a single 8-lead SOIC package, reducing board area and component count. The AD8009ARZ contains a single amplifier and would require multiple packages for multi-channel designs.
Both devices are current-feedback operational amplifiers from Analog Devices. Current-feedback topology provides high slew rates and gain-independent bandwidth, which is relevant when comparing their AC performance specifications.
Verify the required channel count, supply voltage (5 V single supply versus ±5 V dual supplies), -3 dB bandwidth, slew rate, package and pinout, and the load and gain conditions under which the datasheet specifications are guaranteed. These parameters must be checked against the official Analog Devices datasheets for the target design.