Part A
AD8361ARMZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6139 PCS
- Package
- TSSOP-8
- Series
- RF Detectors
Replacement verdict
Not a drop-in replacement
The AD8361ARMZ and AD8369ARU are fundamentally different devices: the AD8361ARMZ is an RMS-responding RF power detector, while the AD8369ARU is a digitally controlled variable gain amplifier. Their core functions, signal paths, and control interfaces do not align, so neither part can functionally substitute for the other in a given design.
Different device function
Different signal path role
Different control interface
Different package and pinout
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8361ARMZ | AD8369ARU | Why it matters |
|---|---|---|---|
| Function | RMS-responding power detector (RF/IF detector) | Digitally controlled variable gain amplifier (VGA) | These are fundamentally different device types; one measures signal power while the other amplifies and adjusts gain, so they are not functionally interchangeable. |
| Frequency Range | DC to 2.5 GHz | DC to 600 MHz | Operating frequency range determines whether the part can be used in a given signal chain; the detector covers much higher frequencies than the VGA. |
| Primary Output / Gain | Linear-in-dB DC output proportional to input RMS power | Amplified RF output with digitally programmable gain | The output type defines how the device interfaces with the rest of the system; a power detector outputs a DC voltage while a VGA outputs an RF signal. |
| Gain / Measurement Range | Approximately 30 dB measurement range | -10 dB to +35 dB gain range (45 dB span) | The dynamic range indicates the span of signal levels the device can handle, which is critical for system dynamic range planning. |
| Control Interface | No digital control (analog output only) | 3-bit parallel digital gain control | Digital control allows the VGA gain to be programmed by a microcontroller, whereas the detector requires no control interface. |
| Supply Voltage | 2.7 V to 5.5 V | 3.0 V to 5.5 V | Supply voltage compatibility affects whether the part can share a common rail in the design; the minimum supply differs slightly. |
| Package | 8-lead MSOP (RMZ) | 16-lead TSSOP (RU) | Package footprint and pin count affect PCB layout and cannot be directly substituted without board redesign. |
| Typical Supply Current | Approximately 1.1 mA | Approximately 30 mA | Power consumption impacts thermal design and battery life; the VGA draws substantially more current than the detector. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD8361ARMZ | AD8369ARU |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | - | X-AMP® |
| Part Status | Active | Obsolete |
| Amplifier Type | - | Variable Gain |
| Number of Circuits | - | 1 |
| Slew Rate | - | 1200V/µs |
| -3 dB Bandwidth | - | 600 MHz |
| Current - Input Bias | - | 160 µA |
| Supply Current | 1.1 mA | 37mA |
| Voltage - Supply Span(Min) | - | 3 V |
| Voltage - Supply Span(Max) | - | 5.5 V |
| Operating Temperature | - | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Frequency | 2.5GHz | - |
| RF Type | Cellular, CDMA, W-CDMA | - |
| Input Range | 0 ~ 700mV | - |
| Accuracy | ±0.25dB | - |
| Voltage - Supply | 2.7V ~ 5.5V | - |
Frequently asked questions
What are the primary functional differences between the AD8361ARMZ and the AD8369ARU?
The AD8361ARMZ is a 2.5 GHz TruPwr RMS-responding power detector intended for measuring RF power in applications such as CDMA, W-CDMA, and QAM systems. The AD8369ARU is a 600 MHz digitally controlled variable gain amplifier (VGA) with a 45 dB gain range in 3 dB steps. In short, the AD8361ARMZ measures signal power, while the AD8369ARU amplifies and adjusts signal gain.
Are the AD8361ARMZ and AD8369ARU pin-compatible or interchangeable?
No. The AD8361ARMZ is supplied in an 8-lead MSOP package, and the AD8369ARU is supplied in a 16-lead TSSOP package. They have different pin counts, pin functions, and PCB land patterns, so they are not pin-compatible and cannot be used as drop-in replacements for one another.
What frequency ranges do the AD8361ARMZ and AD8369ARU support?
The AD8361ARMZ operates from DC to 2.5 GHz, making it suitable for RF power measurement at cellular and higher frequencies. The AD8369ARU operates from DC to 600 MHz, which covers intermediate frequency (IF) and lower RF gain-control applications.
How does the gain control interface differ between the AD8369ARU and the AD8361ARMZ?
The AD8369ARU provides digitally controlled gain via a parallel 4-bit control interface, offering 45 dB of gain range in 3 dB steps. The AD8361ARMZ does not have a gain control interface; it outputs a DC voltage proportional to the RMS value of the input signal, which is then digitized or processed by downstream circuitry.
What are the typical supply voltage requirements for each device?
The AD8361ARMZ operates from a single supply of 2.7 V to 5.5 V. The AD8369ARU operates from a single supply of 3.0 V to 5.5 V. Both are compatible with common 3.3 V and 5 V system rails, but the AD8361ARMZ supports a slightly lower minimum supply voltage.
Can the AD8361ARMZ and AD8369ARU be used together in the same signal chain?
Yes, they can serve complementary roles in an RF signal chain. The AD8369ARU can provide variable gain amplification of an RF or IF signal, and the AD8361ARMZ can be used to measure the RMS power of the signal at a relevant point in the chain. Their frequency ranges overlap up to 600 MHz, so co-operation is possible within that band, subject to system-level design validation.
What are the package and operating temperature considerations for these two parts?
The AD8361ARMZ is offered in an 8-lead MSOP package, and the AD8369ARU is offered in a 16-lead TSSOP package. Both are specified for the industrial temperature range of −40°C to +85°C. PCB layout, thermal relief, and decoupling should follow the respective manufacturer datasheet recommendations for each package.