AD8422ARZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 3872 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Bảng so sánh chi tiết giữa AD8422ARZ và AD8421BRZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD8422ARZ is a viable functional replacement candidate for the AD8421BRZ in many instrumentation amplifier applications, sharing the same pinout, package, and gain-setting architecture. However, designers must validate noise performance, bandwidth, and gain accuracy against their specific requirements, since the AD8421BRZ offers lower voltage noise and higher bandwidth while the AD8422ARZ trades some of that performance for lower power consumption.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8421BRZ | AD8422ARZ | Why it matters |
|---|---|---|---|
| Gain Bandwidth Product (GBP) | 10 MHz | 2.2 MHz | Determines the maximum frequency at which the amplifier can provide useful gain; a higher GBP supports wider-bandwidth signal conditioning. |
| Input Voltage Noise (1 kHz) | 3 nV/√Hz | 8 nV/√Hz | Lower input voltage noise improves signal-to-noise ratio for low-level sensor signals, which is critical in precision measurement front ends. |
| Input Offset Voltage (max) | 60 µV | 70 µV | Offset voltage directly adds DC error to the amplified signal; tighter offset specs reduce the need for calibration in precision applications. |
| Supply Current per Amplifier | 2.3 mA | 0.3 mA | Lower supply current enables battery-powered and low-power designs; the AD8422 is significantly more power-efficient. |
| CMRR (Gain = 1000, DC to 60 Hz) | 120 dB | 130 dB | High common-mode rejection suppresses interference and ground noise; the AD8422 offers superior rejection for noisy environments. |
| Gain Range | 1 to 10000 | 1 to 1000 | Defines the maximum amplification achievable; the AD8421 supports higher gain settings for very small signals. |
| Input Bias Current (max) | 1 nA | 0.5 nA | Low bias current minimizes errors with high-impedance sources; the AD8422 is better suited for high-source-impedance sensors. |
| Slew Rate | 35 V/µs | 0.8 V/µs | Slew rate limits large-signal bandwidth and transient response; the AD8421 handles faster-changing signals. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +125°C | Wider temperature range supports harsh-environment and industrial applications; the AD8422 is rated for higher ambient temperatures. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8422ARZ | AD8421BRZ |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | Rail-to-Rail | - |
| Slew Rate | 0.8V/µs | 35V/µs |
| -3 dB Bandwidth | 2.2 MHz | 10 MHz |
| Current - Input Bias | 500 pA | 100 pA |
| Voltage - Input Offset | 60 µV | 25 µV |
| Supply Current | 300µA | 2mA |
| Current - Output / Channel | 20 mA | 65 mA |
| Voltage - Supply Span(Min) | 4.6 V | 5 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8421BRZ is a high-speed, low-power instrumentation amplifier with a gain bandwidth product of 10 MHz and a slew rate of 35 V/µs, housed in an 8-lead SOIC package. The AD8422ARZ is a lower-power, precision instrumentation amplifier with a gain bandwidth product of 2.2 MHz and a slew rate of 0.8 V/µs, also in an 8-lead SOIC package. The AD8421BRZ offers higher bandwidth and faster settling, while the AD8422ARZ targets lower power consumption and higher DC precision.
Yes, both devices are offered in an 8-lead SOIC package with the same pinout, allowing them to share a common PCB footprint. However, designers must verify that the electrical performance differences (bandwidth, supply current, noise, and gain range) are acceptable for the target application before substituting one for the other.
The AD8421BRZ typically draws approximately 2.3 mA of supply current, while the AD8422ARZ typically draws approximately 0.3 mA. The AD8422ARZ is therefore better suited for low-power, battery-operated, or portable designs, whereas the AD8421BRZ trades higher supply current for greater bandwidth and faster dynamic response.
The AD8421BRZ specifies an input voltage noise density of approximately 3 nV/√Hz at 1 kHz, while the AD8422ARZ specifies approximately 8 nV/√Hz at 1 kHz. For low-level signal amplification where noise floor is critical, the AD8421BRZ provides superior noise performance.
The AD8421BRZ has a gain bandwidth product of 10 MHz, and the AD8422ARZ has a gain bandwidth product of 2.2 MHz. The higher gain bandwidth of the AD8421BRZ supports wider signal bandwidth at a given gain setting, making it preferable for high-speed signal conditioning applications.
No. Although the two devices are pin-compatible in the 8-lead SOIC package, the AD8422ARZ has a significantly lower gain bandwidth product (2.2 MHz versus 10 MHz) and slew rate (0.8 V/µs versus 35 V/µs). In high-speed applications requiring the bandwidth or transient response of the AD8421BRZ, the AD8422ARZ would not meet the same performance requirements.
The AD8421BRZ specifies a maximum input offset voltage of 60 µV (B grade), while the AD8422ARZ specifies a maximum input offset voltage of 150 µV (A grade). For DC precision applications, the AD8421BRZ offers a tighter offset voltage limit, though the AD8422ARZ remains suitable for many precision signal-chain designs.
The AD8422ARZ is better suited for low-power portable instrumentation because its typical supply current of approximately 0.3 mA is substantially lower than the approximately 2.3 mA of the AD8421BRZ. The reduced power consumption of the AD8422ARZ extends battery life, while the AD8421BRZ is preferable when higher bandwidth and faster settling are required.