AD8429BRZ vs AD8428BRZ-RL

Bảng so sánh chi tiết giữa AD8429BRZ và AD8428BRZ-RL cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8429BRZ and AD8428BRZ-RL are both precision instrumentation amplifiers from Analog Devices in the same SOIC-8 package, sharing identical supply, gain-setting, and temperature specifications. The AD8428BRZ-RL offers substantially higher gain-bandwidth and a fixed gain of 2000, while the AD8429BRZ provides a wider gain range with lower noise. They are functionally compatible for fixed high-gain applications, but the gain configuration and bandwidth differences must be validated against the target circuit requirements before substitution.

Package Type High match
Supply Voltage Range High match
Gain Configuration Validation required
Bandwidth and Noise Validation required

Parts at a glance

Part A

AD8429BRZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
6879 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Part B

AD8428BRZ-RL

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
2362 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8429BRZ AD8428BRZ-RL Why it matters
Gain Range 1 to 10000 (set by external resistor) Fixed gain of 2000 Determines whether the amplifier can be configured for arbitrary gains or is locked to a single fixed gain, directly affecting circuit flexibility and substitutability.
Input Voltage Noise (1 kHz, typical) 1 nV/√Hz 1.5 nV/√Hz Lower input voltage noise improves signal-to-noise ratio for low-level sensor signals, a key selection criterion in precision instrumentation.
Bandwidth (at rated gain) 1.2 MHz (G = 1) 3.5 MHz (G = 2000) Bandwidth defines the maximum signal frequency the amplifier can process, affecting suitability for dynamic or high-speed measurement applications.
Input Offset Voltage (maximum) 50 µV 30 µV Offset voltage contributes DC error at the output; lower offset improves accuracy in precision DC measurement systems.
Gain Error (maximum) 0.02% (G = 1) 0.05% Gain error affects absolute accuracy of the amplified signal, which is critical for calibrated measurement chains.
Supply Voltage Range ±4 V to ±18 V ±4 V to ±18 V Defines the allowable power supply rails; matching ranges allow drop-in compatibility in existing supply architectures.
Supply Current (typical) 6.5 mA 6.5 mA Quiescent current impacts power budget and thermal design; identical values ease power-supply substitution.
CMRR (G = 1, typical) 90 dB 130 dB (G = 2000) Common-mode rejection ratio determines the ability to reject interference on input lines, essential for noisy industrial environments.
Package 8-Lead SOIC 8-Lead SOIC Package compatibility ensures the part can be placed on the same PCB footprint without layout changes.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Temperature range confirms suitability for industrial and automotive environments and supports direct substitution in harsh conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8429BRZ AD8428BRZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Slew Rate 22V/µs 50V/µs
-3 dB Bandwidth 15 MHz 3.5 MHz
Current - Input Bias 150 nA 200 nA
Voltage - Input Offset 50 µV 25 µV
Supply Current 6.7mA 6.5mA
Current - Output / Channel 35 mA 30 mA
Voltage - Supply Span(Min) 8 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8429BRZ and AD8428BRZ-RL?

The AD8429BRZ is a low-noise instrumentation amplifier with a fixed gain of 1000 and a bandwidth of approximately 1.2 MHz, while the AD8428BRZ-RL is a low-noise instrumentation amplifier with a fixed gain of 2000 and a bandwidth of approximately 3.5 MHz. Both are offered in an 8-lead SOIC package, but the AD8428BRZ-RL is supplied in tape-and-reel packaging, whereas the AD8429BRZ is typically supplied in tube packaging.

Are the AD8429BRZ and AD8428BRZ-RL pin-compatible?

Yes. Both devices are specified in the same 8-lead SOIC (R-8) package with the same pinout, so they are pin-compatible and can share the same PCB land pattern.

Can the AD8429BRZ and AD8428BRZ-RL be used as direct substitutes for each other?

Not directly. The two devices have different fixed gains (1000 for the AD8429BRZ versus 2000 for the AD8428BRZ-RL) and different bandwidth and noise characteristics, so substituting one for the other changes the signal chain gain and must be validated against the target design requirements.

What is the gain of each device?

The AD8429BRZ has a fixed gain of 1000, and the AD8428BRZ-RL has a fixed gain of 2000. Both are fixed-gain instrumentation amplifiers, so the gain is set internally and cannot be programmed externally.

How do the noise specifications compare?

Both devices are low-noise instrumentation amplifiers. The AD8429BRZ is specified with an input voltage noise of 1 nV/√Hz, and the AD8428BRZ-RL is specified with an input voltage noise of 1.5 nV/√Hz. Designers should confirm the exact test conditions in the respective manufacturer datasheets.

What bandwidth does each device provide?

The AD8429BRZ provides a bandwidth of approximately 1.2 MHz at its fixed gain of 1000, while the AD8428BRZ-RL provides a bandwidth of approximately 3.5 MHz at its fixed gain of 2000. The higher bandwidth of the AD8428BRZ-RL is achieved at the higher fixed gain.

What supply voltage range do these devices support?

Both the AD8429BRZ and AD8428BRZ-RL operate from dual supplies of ±4 V to ±18 V (or a single supply of 8 V to 36 V). Designers should verify the exact supply range and output swing limits in the manufacturer datasheets for their specific operating conditions.

What packaging options are available for these parts?

Both devices are offered in an 8-lead SOIC package. The AD8429BRZ is typically supplied in tube packaging, while the AD8428BRZ-RL suffix indicates tape-and-reel packaging for automated assembly. The electrical performance is the same regardless of packaging.