AD8495CRMZ vs AD8495ARMZ

Bảng so sánh chi tiết giữa AD8495CRMZ và AD8495ARMZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8495ARMZ and AD8495CRMZ are functionally equivalent thermocouple amplifier ICs sharing the same core specifications, differing only in specified temperature grade and package marking. The CRMZ variant offers a wider guaranteed operating temperature range, making it a suitable functional replacement for the ARMZ in most applications, provided the extended temperature specification is acceptable and package marking differences are validated against the design requirements.

Function and Output Type High match
Package Type High match
Operating Temperature Range Validation required
Supply Voltage Range High match

Parts at a glance

Part A

AD8495CRMZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
5995 PCS
Package
MSOP-8
Series
Interface - Sensor and Detector Interfaces
Part B

AD8495ARMZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
7539 PCS
Package
MSOP-8
Series
Interface - Sensor and Detector Interfaces

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8495ARMZ AD8495CRMZ Why it matters
Temperature Range -40°C to +125°C 0°C to +70°C The wider industrial temperature range of the ARMZ version allows operation in harsher environments, while the CRMZ is limited to commercial temperature conditions.
Package / Grade MSOP-8 (RM-8), A-grade MSOP-8 (RM-8), C-grade The grade designation reflects different tested performance limits and qualification levels; A-grade parts are typically specified over the industrial range while C-grade parts are commercial-grade.
Function Thermocouple amplifier with cold junction compensation Thermocouple amplifier with cold junction compensation Both devices perform the same core signal-conditioning function for K-type thermocouples, making them functionally interchangeable in the same circuit topology.
Output Voltage Range 0 V to (VS - 1.5 V) 0 V to (VS - 1.5 V) Identical output swing ensures the same ADC input range and signal scaling can be used without redesign.
Supply Voltage Range 2.7 V to 18 V (single supply) 2.7 V to 18 V (single supply) Matching supply requirements mean the same power rail design works for either part.
Output Scale Factor 5 mV/°C 5 mV/°C The identical transfer function (5 mV/°C) preserves the temperature-to-voltage mapping, so firmware and calibration remain valid across both parts.
Input Offset Voltage ±0.5 mV (typical) ±0.5 mV (typical) Low and equal offset voltage keeps measurement accuracy consistent between the two devices.
Operating Supply Current 180 µA (typical) 180 µA (typical) Identical quiescent current supports the same low-power budget in portable or loop-powered designs.
Mounting / Package Type Surface mount, 8-lead MSOP Surface mount, 8-lead MSOP Same footprint and pinout allow drop-in board replacement without layout changes.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8495CRMZ AD8495ARMZ
Part Status Active Active
Type Thermocouple Amplifier Thermocouple Amplifier
Input Type Differential Differential
Output Type Analog Analog
Supply Current 250 µA 250 µA
Operating Temperature 0°C ~ 50°C 0°C ~ 50°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between the AD8495ARMZ and the AD8495CRMZ?

Both are AD8495 thermocouple amplifiers from Analog Devices in an 8-lead MSOP package. The difference is the specified temperature grade: the AD8495ARMZ is rated for the industrial temperature range of −40°C to +125°C, while the AD8495CRMZ is rated for the commercial temperature range of 0°C to +70°C. The electrical function and pinout are otherwise the same.

Are the AD8495ARMZ and AD8495CRMZ pin-compatible?

Yes. Both devices are offered in the same 8-lead MSOP (RM) package with an identical pinout, so they are pin-compatible and share the same PCB land pattern.

Can the AD8495CRMZ be used as a drop-in replacement for the AD8495ARMZ?

Only if the application's operating temperature stays within the AD8495CRMZ commercial range of 0°C to +70°C. For operation below 0°C or above +70°C, the AD8495ARMZ industrial-grade version must be used instead.

What is the function of the AD8495 devices?

The AD8495 is a precision analog thermocouple amplifier with cold-junction compensation, designed to produce an analog output proportional to temperature for K-type thermocouples. It integrates the amplifier and cold-junction compensation circuitry in a single MSOP package.

What supply voltage do the AD8495ARMZ and AD8495CRMZ require?

Both devices operate from a single supply of 2.7 V to 18 V, or from dual supplies of ±2.7 V to ±18 V, per the Analog Devices datasheet.

Do the AD8495ARMZ and AD8495CRMZ differ in accuracy or output scaling?

No. Both grades share the same output scaling of 5 mV/°C and the same specified gain and offset performance. The only documented difference between the A and C grades is the operating temperature range.

Which grade should be selected for an industrial application?

The AD8495ARMZ should be selected for industrial applications because its −40°C to +125°C temperature range covers environments outside the 0°C to +70°C range of the AD8495CRMZ.