AD8510BRZ vs AD8512ARZ

Bảng so sánh chi tiết giữa AD8510BRZ và AD8512ARZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8512ARZ and AD8510BRZ are both dual/quad precision JFET-input operational amplifiers from the same AD851x family, sharing identical core amplifier topology, supply range, and signal characteristics. The AD8512ARZ is a dual op-amp in an 8-lead SOIC package, while the AD8510BRZ is a single op-amp in an 8-lead SOIC package with tighter grade specifications. Because channel count and package pinout differ, the AD8510BRZ is not a direct drop-in for the AD8512ARZ in dual-channel sockets, but it is a viable functional replacement candidate where a single-channel device with higher grade is acceptable and the board layout is adapted accordingly.

Channel Count Validation required
Package Type High match
Supply Voltage Range High match
Input Offset Voltage Grade Validation required

Parts at a glance

Part A

AD8510BRZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
3148 PCS
Series
Linear - Amplifiers - Instrumentation, Op Amps, Buffer Amps
Part B

AD8512ARZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
2506 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8512ARZ AD8510BRZ Why it matters
Number of Amplifiers 2 (Dual) 1 (Single) Determines channel count; a dual cannot directly replace a single in a board designed for one amplifier without layout changes.
Input Offset Voltage (max) 0.8 mV 0.8 mV Sets DC accuracy; matching offset specs means similar precision performance in signal-conditioning circuits.
Input Bias Current (typ) 25 pA 25 pA Low bias current is critical for high-impedance sensor and photodiode front-ends; identical values preserve input loading behavior.
Gain Bandwidth Product 8 MHz 8 MHz Defines the closed-loop bandwidth achievable; equal GBW means comparable AC response and stability in feedback designs.
Slew Rate 20 V/µs 20 V/µs Governs large-signal transient response; matching slew rate ensures similar behavior for fast pulses and driving capacitive loads.
Input Voltage Noise Density 8 nV/√Hz 8 nV/√Hz Determines noise floor in low-level signal paths; identical noise density preserves SNR in precision analog chains.
Supply Voltage Range ±5 V to ±15 V ±5 V to ±15 V Defines compatible power rails; the same range allows drop-in use in existing dual-supply systems.
Package 8-Lead SOIC 8-Lead SOIC Footprint compatibility affects PCB assembly; both use the same SOIC outline, easing physical substitution.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Ensures reliable operation across environments; identical ratings mean equivalent thermal robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8510BRZ AD8512ARZ
Part Status Active Active
Base Product Number AD8510 -
Amplifier Type J-FET J-FET
Number of Circuits 1 2
Slew Rate 20V/µs 20V/µs
Gain Bandwidth Product 8 MHz 8 MHz
Current - Input Bias 25 pA 25 pA
Voltage - Input Offset 80 µV 100 µV
Supply Current 2.2mA 2.2mA (x2 Channels)
Voltage - Supply Span (Min) 9 V -
Voltage - Supply Span (Max) 36 V -
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
Packaging Tube -
Current - Output / Channel 70 mA 70 mA
Voltage - Supply Span(Min) - 10 V
Voltage - Supply Span(Max) - 30 V

Frequently asked questions

What are the primary differences between the AD8512ARZ and AD8510BRZ?

The AD8512ARZ is a dual precision JFET-input operational amplifier, while the AD8510BRZ is a single precision JFET-input operational amplifier. Both share the same core amplifier architecture and are specified for low offset voltage, low input bias current, and low noise, but they differ in channel count, package, and grade. The AD8512ARZ is supplied in an 8-lead SOIC package, and the AD8510BRZ is supplied in an 8-lead SOIC package as a single-channel device.

Are the AD8512ARZ and AD8510BRZ pin-compatible?

No. The AD8512ARZ is a dual op amp in an 8-lead SOIC with two independent amplifiers, while the AD8510BRZ is a single op amp in an 8-lead SOIC. Their pin functions and internal connections differ, so they are not direct drop-in replacements for each other despite sharing the same package footprint.

What are the key DC precision specifications of these amplifiers?

Both the AD8512ARZ and AD8510BRZ are precision JFET-input op amps with low input offset voltage and low input bias current. The AD8510BRZ is offered in the higher B grade, which typically provides tighter offset voltage and offset drift specifications than the A grade used in the AD8512ARZ. Designers should consult the respective manufacturer datasheets for the exact grade-specific limits before finalizing a design.

Can the AD8510BRZ be used to replace one channel of the AD8512ARZ?

Functionally, a single AD8510BRZ can implement one amplifier channel equivalent to one channel of the AD8512ARZ, but it is not a pin-for-pin replacement. The dual AD8512ARZ integrates two amplifiers in one package, so replacing it with single devices requires PCB layout changes, separate power decoupling, and revalidation of the circuit. The B-grade AD8510BRZ may also offer tighter specifications than the A-grade AD8512ARZ, which should be verified against the datasheets.

What are typical applications for the AD8512ARZ and AD8510BRZ?

These JFET-input precision op amps are suited to high-impedance sensor interfaces, photodiode and transimpedance amplifier circuits, precision filters, and low-noise signal conditioning. The dual AD8512ARZ is convenient where two matched amplifier channels are needed in a compact footprint, while the single AD8510BRZ is used where only one channel is required and the higher B-grade precision is beneficial.

Do both devices operate from the same supply voltages?

Both the AD8512ARZ and AD8510BRZ are specified for dual-supply operation in the range of approximately ±5 V to ±15 V, consistent with the AD8510/AD8512 family datasheet. The exact minimum and maximum supply limits, as well as the corresponding input and output voltage ranges, should be confirmed from the official manufacturer datasheet for each grade before use.

How do the noise and bandwidth characteristics compare?

The AD8512ARZ and AD8510BRZ are based on the same JFET-input amplifier core, so their typical noise density and gain-bandwidth product are similar. The AD8510BRZ, being the B grade, is specified with tighter guaranteed limits. For critical low-noise or high-bandwidth designs, the grade-specific typical and guaranteed values in the manufacturer datasheets should be compared directly.