Part A
AD9059BRS
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4931 PCS
- Package
- SSOP-28
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Replacement verdict
Compatible functional replacement candidate
The AD9057BRS-60 is a viable functional replacement candidate for the AD9059BRS in many designs, as both are 8-bit analog-to-digital converters sharing a compatible package footprint and supply architecture. However, the AD9057BRS-60 offers a higher maximum sampling rate while the AD9059BRS provides dual internal track-and-hold channels, so designers must validate the specific sampling-rate and channel-count requirements of their application before substituting one for the other.
Resolution and Architecture
Validation required
Maximum Sampling Rate
Validation required
Package Type
High match
Analog Input Configuration
Validation required
Parts at a glance
Part B
AD9057BRS-60
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 9055 PCS
- Package
- SSOP-20
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9059BRS | AD9057BRS-60 | Why it matters |
|---|---|---|---|
| Resolution | 8 bit | 8 bit | Both converters provide 8-bit resolution, so quantization granularity is equivalent for signal reconstruction. |
| Sampling Rate | 60 MSPS | 60 MSPS | Identical maximum sampling rate means both can digitize signals up to the same Nyquist bandwidth. |
| Number of Input Channels | 2 (dual) | 1 (single) | A dual-channel device can sample two signals simultaneously, while a single-channel part requires external multiplexing for multi-signal systems. |
| Analog Input Type | Single-ended | Single-ended | Both accept single-ended inputs, simplifying the analog front-end drive requirements. |
| Supply Voltage | 5 V | 5 V | Matching 5 V supply allows the parts to share the same power rail in a system design. |
| Output Interface | Parallel CMOS/TTL | Parallel CMOS/TTL | Identical parallel output format enables direct connection to the same digital backend without glue logic changes. |
| Package | 28-lead SSOP | 20-lead SSOP | Different package footprints and pin counts prevent drop-in board replacement without layout changes. |
| Power Consumption | ~400 mW (typ) | ~300 mW (typ) | Lower power dissipation affects thermal design and supply sizing, especially in dense or portable systems. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent industrial temperature range means both suit the same environmental conditions. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD9059BRS | AD9057BRS-60 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Number of Bits | 8 | 8 |
| Sampling Rate(Per Second) | 60M | 60M |
| Number of Inputs | 2 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 2 | 1 |
| Architecture | Flash | Pipelined |
| Reference Type | Internal | Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 3V ~ 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | Simultaneous Sampling | - |
Frequently asked questions
What are the key differences between the AD9059BRS and AD9057BRS-60?
The AD9059BRS is a dual 8-bit analog-to-digital converter, while the AD9057BRS-60 is a single 8-bit ADC. The AD9057BRS-60 is specified for a 60 MSPS sampling rate, whereas the AD9059BRS is a dual-channel device intended for applications requiring two synchronized 8-bit conversion channels. Pin count, channel architecture, and power consumption differ between the two devices, so they are not drop-in replacements.
Are the AD9059BRS and AD9057BRS-60 pin-compatible?
No. The AD9059BRS is a dual-channel ADC and the AD9057BRS-60 is a single-channel ADC, so their pinouts and package pin functions differ. A direct PCB substitution is not possible without layout changes.
What is the resolution and sampling rate of each device?
Both devices provide 8-bit resolution. The AD9057BRS-60 is specified for a 60 MSPS maximum sampling rate. The AD9059BRS is a dual 8-bit ADC; its sampling rate specification should be confirmed from the Analog Devices datasheet for the exact grade, as it differs from the single-channel AD9057BRS-60.
Can the AD9057BRS-60 replace one channel of the AD9059BRS?
Functionally, the AD9057BRS-60 provides a single 8-bit conversion channel, so two AD9057BRS-60 devices could in principle serve a dual-channel function. However, this requires two packages, separate clock and layout considerations, and validation of timing and power against the original AD9059BRS design. It is not a direct one-for-one replacement.
Do both parts use the same package type?
Both are offered in surface-mount packages, but the specific package and pin count differ because the AD9059BRS is dual-channel and the AD9057BRS-60 is single-channel. Package and land pattern compatibility must be verified from the respective Analog Devices datasheets before any substitution.
Which device should be selected for a dual-channel acquisition design?
The AD9059BRS is the appropriate choice when two matched 8-bit conversion channels are required in a single package, since it integrates dual ADCs. The AD9057BRS-60 is a single-channel device and would require two instances for a dual-channel design, with additional board space and clock distribution considerations.
Are these parts still recommended for new designs?
Both the AD9059BRS and AD9057BRS-60 are legacy Analog Devices converter products. Designers should confirm current lifecycle status, availability, and any recommended replacement parts directly with Analog Devices or authorized distributors before committing to new designs.