ADF41513BCPZ vs ADF4154BCP

Bảng so sánh chi tiết giữa ADF41513BCPZ và ADF4154BCP cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADF41513BCPZ and ADF4154BCP are not drop-in replacements for one another. The ADF41513BCPZ is a higher-frequency fractional-N PLL synthesizer with an integrated VCO covering a substantially wider RF range, while the ADF4154BCP is a lower-frequency fractional-N PLL without an integrated VCO. They differ in frequency range, integration level, package footprint, and supply/interface requirements, so a direct board-level substitution is not possible without redesign.

Different frequency range Different integration level Different package footprint Different supply requirements

Parts at a glance

Part A

ADF41513BCPZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
6981 PCS
Package
WFQFN-24
Series
Clock-Timing - Clock Generators, PLLs, Frequency Synthesizers
Part B

ADF4154BCP

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
5698 PCS
Package
WFQFN-20
Series
Clock-Timing - Clock Generators, PLLs, Frequency Synthesizers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADF41513BCPZ ADF4154BCP Why it matters
Frequency Range (Max) 13 GHz 4 GHz Determines the maximum RF output frequency the PLL synthesizer can support; a higher limit enables higher-band applications.
Maximum Operating Frequency (RF Input) 13 GHz 4 GHz Sets the upper bound of the external VCO/reference signal the device can accept, directly limiting usable system bandwidth.
Normalized Phase Noise Floor -227 dBc/Hz -216 dBc/Hz A lower phase noise floor yields cleaner spectral performance, critical for high-frequency and high-sensitivity RF systems.
Supply Voltage 3.0 V to 3.6 V 2.7 V to 3.3 V Defines the required power rail; mismatched ranges affect compatibility with existing power supply designs.
Package / Pin Count 32-Lead LFCSP 20-Lead LFCSP Different footprints and pin counts prevent direct drop-in replacement on an existing PCB layout.
Maximum RF Output Power -6 dBm (typical) -6 dBm (typical) Output power level affects the drive capability into the following stage; similar values ease interface design.
Fractional-N Modulus / Resolution 25-bit fractional 25-bit fractional Higher fractional resolution enables finer frequency step sizes and lower spurious content in synthesized signals.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Confirms both parts meet the same environmental envelope for industrial-grade applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADF41513BCPZ ADF4154BCP
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Integer-N/Fractional-N Fractional N Synthesizer (RF)
PLL Yes Yes
Input CML, CMOS CMOS
Output Clock Clock
Ratio - Input: Output 2:1 2:1
Differential - Input: Output Yes/No Yes/No
Frequency - Max 26.5GHz 4GHz
Divider / Multiplier Yes/Yes No/Yes
Voltage - Supply 3.135V ~ 3.465V 2.7V ~ 3.3V
Mounting Type Surface Mount Surface Mount
Number of Circuits 1 -
Operating Temperature -40°C ~ 105°C -

Frequently asked questions

What are the key differences between the ADF41513BCPZ and the ADF4154BCP?

The ADF41513BCPZ is a 26.5 GHz fractional-N PLL synthesizer with an integrated VCO, while the ADF4154BCP is a 4 GHz fractional-N PLL synthesizer without an integrated VCO. The ADF41513BCPZ operates over a much higher frequency range and integrates more functionality, whereas the ADF4154BCP requires an external VCO and is limited to lower frequencies.

Are the ADF41513BCPZ and ADF4154BCP pin-compatible?

No. The ADF41513BCPZ is supplied in a 32-lead LFCSP package, while the ADF4154BCP is supplied in a 20-lead LFCSP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be directly substituted on the same PCB footprint.

What is the maximum operating frequency of each device?

The ADF41513BCPZ supports RF output frequencies up to 26.5 GHz. The ADF4154BCP supports RF output frequencies up to 4 GHz. The ADF41513BCPZ is therefore suited to higher-frequency applications such as microwave and millimeter-wave systems.

Do both devices integrate a VCO?

No. The ADF41513BCPZ includes an integrated VCO, which simplifies design and reduces external component count. The ADF4154BCP does not include an integrated VCO and requires an external VCO to complete the synthesizer loop.

What are the supply voltage requirements for these devices?

The ADF41513BCPZ operates from a 3.3 V supply. The ADF4154BCP operates from a 3.0 V to 3.6 V supply. Both devices are compatible with common 3.3 V system rails, but the ADF4154BCP offers a slightly wider supply tolerance range.

Can the ADF4154BCP be used as a drop-in replacement for the ADF41513BCPZ?

No. The two devices differ in package size, pin count, frequency range, and VCO integration. The ADF4154BCP cannot directly replace the ADF41513BCPZ without redesigning the PCB, revalidating the loop filter, and confirming that the lower 4 GHz frequency range meets the application requirements.

Which device is better suited for high-frequency microwave applications?

The ADF41513BCPZ is better suited for high-frequency microwave and millimeter-wave applications because it supports output frequencies up to 26.5 GHz and integrates a VCO. The ADF4154BCP, limited to 4 GHz and requiring an external VCO, is more appropriate for lower-frequency RF designs.