ADM3050EBRIZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 5255 PCS
- Package
- SOIC-8
- Series
- Interface - Drivers, Receivers, Transceivers
Bảng so sánh chi tiết giữa ADM3050EBRIZ và ADM3054BRWZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADM3050EBRIZ is a functional replacement candidate for the ADM3054BRWZ in isolated CAN applications, sharing the same isolated CAN transceiver function, SOIC-16 package footprint, and 5 kV rms isolation rating. However, the ADM3050EBRIZ offers higher data rates and a wider supply voltage range, so system-level validation of timing, supply, and bus loading is recommended before direct substitution.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3054BRWZ | ADM3050EBRIZ | Why it matters |
|---|---|---|---|
| Data Rate | 1 Mbps | 12 Mbps | Maximum bus speed supported; the higher-rate part can replace the lower-rate one in faster networks but not vice versa. |
| Isolation Rating | 5 kV rms | 5.7 kV rms | Determines the safe galvanic isolation level between the bus and logic side; higher rating offers greater safety margin. |
| Supply Voltage (VCC) | 5 V (single supply) | 5 V (VCC1) / 5 V (VCC2, isolated) | Defines the required power rails; differences affect board-level power design and whether a separate isolated supply is needed. |
| Package | 16-Lead SOIC_W | 16-Lead SOIC_W | Footprint compatibility; identical package allows drop-in PCB replacement without layout changes. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +105°C | Wider temperature range enables use in harsher industrial environments and provides margin in high-ambient designs. |
| Number of Channels | 1 Tx / 1 Rx (transceiver) | 1 Tx / 1 Rx (transceiver) | Channel count must match the bus topology; both are single-channel CAN transceivers, so functional role is equivalent. |
| Isolation Technology | iCoupler (magnetic) | iCoupler (magnetic) | Same isolation technology ensures comparable reliability, transient immunity, and lifetime characteristics. |
| Common-Mode Transient Immunity | 25 kV/µs | 100 kV/µs | Higher CMTI improves robustness against fast common-mode transients in noisy industrial environments. |
| Fail-Safe Receiver | Yes | Yes | Fail-safe behavior guarantees a defined logic output on an idle or open bus, preventing spurious data. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3050EBRIZ | ADM3054BRWZ |
|---|---|---|
| Series | iCoupler® | iCoupler® |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver, Isolated |
| Protocol | CAN | CAN |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Receiver Hysteresis | 150 mV | - |
| Data Rate | 12Mbps | 1Mbps |
| Voltage - Supply | 0.5V ~ 6V | 0.5V ~ 6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3054BRWZ is a 5 kV rms isolated CAN transceiver in a 16-lead SOIC_W package that integrates a digital isolator and a CAN transceiver, supporting data rates up to 1 Mbps. The ADM3050EBRIZ is a 5 kV rms signal and power isolated CAN FD transceiver in a 20-lead SOIC_W package supporting data rates up to 12 Mbps, with an integrated isolated DC-to-DC converter. The ADM3050EBRIZ supports CAN FD, while the ADM3054BRWZ is specified for classic CAN.
No. The ADM3054BRWZ is supplied in a 16-lead SOIC_W package, while the ADM3050EBRIZ is supplied in a 20-lead SOIC_W package. The different pin counts and pin functions mean they are not drop-in replacements and require different PCB land patterns.
Yes. Both the ADM3054BRWZ and ADM3050EBRIZ are 5 kV rms isolated CAN transceivers per their respective Analog Devices datasheets, providing galvanic isolation between the logic-side and bus-side domains.
Yes. The ADM3050EBRIZ is specified for CAN FD operation with data rates up to 12 Mbps, whereas the ADM3054BRWZ is specified for classic CAN with data rates up to 1 Mbps. Designs requiring CAN FD payloads and higher bit rates should use the ADM3050EBRIZ.
Yes. The ADM3050EBRIZ integrates an isolated DC-to-DC converter to supply the bus-side circuitry, whereas the ADM3054BRWZ provides signal isolation only and requires an external isolated power supply for the bus side.
The ADM3054BRWZ operates from a single 5 V supply on the logic side (VCC) with the bus side powered through the isolation barrier arrangement defined in its datasheet. The ADM3050EBRIZ operates from a 5 V supply on the logic side (VCC) and generates the isolated bus-side supply through its integrated DC-to-DC converter. Refer to the respective Analog Devices datasheets for exact supply and current specifications.
Not as a direct drop-in replacement. The ADM3050EBRIZ has a different package (20-lead versus 16-lead SOIC_W), different pinout, integrated isolated power, and CAN FD capability. A redesign of the PCB land pattern and validation of the power, timing, and bus-side circuitry against the ADM3050EBRIZ datasheet are required before substitution.