ADM4853ARZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6517 PCS
- Package
- SOIC-8
- Series
- Interface - Drivers, Receivers, Transceivers
Bảng so sánh chi tiết giữa ADM4853ARZ và ADM4850AR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADM4853ARZ and ADM4850AR are both half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package with matched supply voltage and data-rate class, making the ADM4853ARZ a viable functional replacement candidate for the ADM4850AR. Designers should validate the receiver input impedance and fail-safe behavior against the target bus before committing to production.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM4853ARZ | ADM4850AR | Why it matters |
|---|---|---|---|
| Data Rate | 10 Mbps | 250 kbps | Maximum signaling speed; the faster part supports higher-throughput buses while the slower part is limited to low-speed networks. |
| Duplex Mode | Full duplex | Half duplex | Full duplex allows simultaneous transmit and receive on separate pairs, while half duplex shares one pair and cannot be substituted without reworking the bus topology. |
| Number of Drivers/Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Confirms both are single-channel transceivers, so the node count per bus is comparable. |
| Supply Voltage | 5 V | 5 V | Both operate from a 5 V rail, so power-supply design is compatible between the two parts. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature ratings mean both suit the same environmental conditions. |
| Package / Mounting | 8-SOIC, surface mount | 8-SOIC, surface mount | Same package and footprint allow drop-in board replacement without layout changes. |
| Receiver Input Impedance (Unit Loads) | 1 unit load | 1 unit load | Both present one unit load, permitting up to 32 nodes on a standard RS-485 bus. |
| Fail-Safe Receiver | Yes (open-circuit fail-safe) | Yes (open-circuit fail-safe) | Both define a known output state on open inputs, preventing indeterminate logic levels during idle bus conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM4853ARZ | ADM4850AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Voltage - Supply | 4.75V ~ 5.25V | 4.75V ~ 5.25V |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | Half | - |
| Receiver Hysteresis | 20 mV | - |
| Data Rate | 10Mbps | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADM4853ARZ is a half-duplex RS-485/RS-422 transceiver specified for data rates up to 10 Mbps, while the ADM4850AR is a half-duplex RS-485/RS-422 transceiver specified for data rates up to 2.5 Mbps. Both are 5 V single-supply devices in 8-lead SOIC packages, but they differ in maximum data rate, slew-rate limiting, and operating temperature range.
Yes. Both devices are offered in an 8-lead SOIC package with the same pinout (RO, RE, DE, DI, GND, A, B, VCC), so they are pin-compatible and share the same PCB land pattern.
The ADM4853ARZ supports data rates up to 10 Mbps. The ADM4850AR supports data rates up to 2.5 Mbps.
Yes. The ADM4850AR is a slew-rate-limited version intended to reduce EMI and reflections, which limits it to 2.5 Mbps. The ADM4853ARZ is a full-speed (non-slew-rate-limited) version rated for 10 Mbps.
Both devices operate from a single 5 V supply. The ADM4853ARZ is specified over the industrial temperature range of −40°C to +85°C. The ADM4850AR is specified over the commercial temperature range of 0°C to +70°C.
Only if the system's data rate does not exceed 2.5 Mbps and the operating temperature stays within 0°C to +70°C. Because the ADM4850AR is slew-rate limited and rated for a narrower temperature range, it cannot replace the ADM4853ARZ in applications requiring 10 Mbps or operation below 0°C.
Yes. Both the ADM4853ARZ and ADM4850AR are RS-485/RS-422 transceivers designed to meet the electrical requirements of the TIA/EIA-485 and TIA/EIA-422 standards for balanced differential data transmission.