ADM709LARZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 6460 PCS
- Series
- Power Management (PMIC) - Supervisors
Bảng so sánh chi tiết giữa ADM709LARZ và ADM705ARZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADM709LARZ and ADM705ARZ are both single-channel microprocessor supervisory circuits in the same 8-pin SOIC package with identical supply-voltage supervision and reset thresholds, making the ADM709LARZ a strong functional replacement candidate for the ADM705ARZ in most designs. The primary distinction is the reset output configuration, so the reset polarity and any watchdog or manual-reset requirements should be confirmed against the target application before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM709LARZ | ADM705ARZ | Why it matters |
|---|---|---|---|
| Reset Threshold Voltage (typ) | 4.65 V | 4.65 V | Determines the supply voltage level at which a reset is asserted; both target 5 V systems with the same threshold, so reset behavior is equivalent. |
| Reset Output Type | Active-low push-pull (RESET) | Active-low push-pull (RESET) plus active-high (RESET bar) | The ADM705 provides both active-low and active-high reset outputs, while the ADM709LARZ provides only active-low, affecting how it interfaces with a given microcontroller reset pin. |
| Watchdog Timer | Yes (1.6 s typ timeout) | Yes (1.6 s typ timeout) | A watchdog resets the processor if firmware stops toggling the WDI pin; both include this supervisory function with the same nominal timeout. |
| Manual Reset Input | Yes (MR, active-low) | Yes (MR, active-low) | Allows an external pushbutton or logic signal to force a system reset; both parts support this, preserving board-level reset control. |
| Supply Voltage Range | 4.75 V to 5.5 V | 4.75 V to 5.5 V | Defines the operating window for the supervisor; identical ranges mean the same 5 V rail compatibility. |
| Supply Current (typ) | 1.5 mA | 1.5 mA | Quiescent current affects overall system power budget; matching values indicate equivalent power impact. |
| Reset Timeout Delay | 200 ms typ | 200 ms typ | Holds the processor in reset after the supply recovers, ensuring stable operation; identical delays preserve boot timing behavior. |
| Package | 8-lead SOIC (R-8) | 8-lead SOIC (R-8) | Footprint and pinout compatibility determine whether the parts are drop-in replacements on an existing PCB; both use the same 8-lead SOIC. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Defines the environments in which the supervisor is guaranteed to operate; identical ranges mean equivalent thermal suitability. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM709LARZ | ADM705ARZ |
|---|---|---|
| Part Status | Active | Active |
| Type | Simple Reset/Power-On Reset | Simple Reset/Power-On Reset |
| Number of Voltages Monitored | 1 | 1 |
| Voltage - Threshold | 4.65V | 4.65V |
| Output | Push-Pull, Totem Pole | Push-Pull, Totem Pole |
| Reset | Active Low | Active Low |
| Reset Timeout | 140ms Minimum | 160ms Minimum |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Base Product Number | ADM709 | - |
| Digi Key Programmable | Not Verified | - |
| Packaging | Tube | - |
The ADM709LARZ and ADM705ARZ are both Analog Devices microprocessor supervisory circuits in 8-lead SOIC packages, but they differ in reset threshold voltage and reset output configuration. The ADM709LARZ is a 4.65 V threshold supervisor with an active-low push-pull reset output, while the ADM705ARZ is a 4.65 V threshold supervisor with an active-low open-drain reset output. Designers must confirm the reset output type required by the target processor before substituting one for the other.
Both devices are offered in the same 8-lead SOIC (R-8) package with the same pinout, so they are physically pin-compatible. However, pin compatibility does not guarantee functional interchangeability because the reset output drive type differs between the two parts.
The ADM709LARZ provides an active-low push-pull (totem-pole) reset output, which can source and sink current. The ADM705ARZ provides an active-low open-drain reset output, which requires an external pull-up resistor and can be wire-ORed with other open-drain signals. The correct choice depends on the reset input requirements of the microprocessor being supervised.
Yes. Both the ADM709LARZ and ADM705ARZ are specified with a reset threshold voltage of 4.65 V, making them suitable for supervising 5 V logic supplies. The threshold tolerance and reset timing should still be verified against the latest Analog Devices datasheet for the specific grade.
Not without verification. Because the ADM705ARZ uses an open-drain reset output while the ADM709LARZ uses a push-pull output, a direct replacement may require adding an external pull-up resistor and confirming that the processor reset input is compatible with open-drain drive. The circuit should be validated against the Analog Devices datasheet before substitution.
Both devices are designed for 5 V supervisory applications and operate from a supply that is monitored against the 4.65 V reset threshold. Exact operating supply voltage limits, quiescent current, and reset timeout specifications should be confirmed from the official Analog Devices datasheet for each part number.
Yes. Both the ADM709LARZ and ADM705ARZ are microprocessor supervisory circuits that include a manual reset input in addition to the power-fail reset function. The manual reset input allows the system to be reset by an external pushbutton or logic signal, and its active polarity and internal pull-up behavior should be verified in the Analog Devices datasheet.