ADRF5021BCCZN
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 3911 PCS
- Package
- LGA-20
- Series
- RF Switches
Bảng so sánh chi tiết giữa ADRF5021BCCZN và ADRF5721BCCZN cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADRF5721BCCZN and ADRF5021BCCZN are not functionally interchangeable despite sharing the same LFCSP package and RF switch family lineage. The ADRF5721BCCZN is a digital step attenuator, while the ADRF5021BCCZN is an absorptive SPDT RF switch, so their core signal-path functions, control interfaces, and RF performance characteristics differ fundamentally. Designers must treat these as distinct functional blocks rather than substitutes.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADRF5721BCCZN | ADRF5021BCCZN | Why it matters |
|---|---|---|---|
| Function | Digital step attenuator (DSA) | SPDT RF switch | These are fundamentally different device types; one attenuates signal amplitude while the other routes signals between ports, so they are not functionally substitutable. |
| Frequency range | 9 kHz to 40 GHz | 9 kHz to 30 GHz | Operating frequency range determines whether the part can be used in a given RF signal chain; the attenuator covers a wider upper band. |
| Attenuation range / configuration | 2 dB to 30 dB, 6-bit digital step attenuator | N/A (switch, not attenuator) | Attenuation capability is the core function of a DSA and is absent in a switch, confirming they serve different roles in a signal chain. |
| Insertion loss | ~1.6 dB typical (at 0 dB state, mid-band) | ~1.3 dB typical (mid-band) | Insertion loss directly impacts signal budget; lower loss preserves signal power through the component. |
| Control interface | Serial (SPI) and parallel control | Single-pin CMOS/LVTTL control | Control interface affects board design and microcontroller compatibility; the DSA offers more flexible digital control than the switch. |
| Package | 24-lead LGA (4 mm x 4 mm) | 20-lead LGA (4 mm x 4 mm) | Package footprint and pin count affect PCB layout and cannot be swapped without redesign. |
| Supply voltage | 3.3 V (single supply) | 3.3 V (single supply) | Supply voltage compatibility determines whether the part can share the same power rail in a design. |
| Input IP3 (linearity) | ~50 dBm typical | ~57 dBm typical | Linearity affects distortion in high-power RF paths; the switch offers higher IP3 for demanding signal environments. |
| Return loss | ~15 dB typical (mid-band) | ~18 dB typical (mid-band) | Return loss indicates impedance matching quality; better matching reduces reflections in the RF chain. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADRF5021BCCZN | ADRF5721BCCZN |
|---|---|---|
| Part Status | Active | Active |
| RF Type | VSAT | - |
| Topology | Absorptive | - |
| Circuit | SPDT | - |
| Frequency Range | 9kHz ~ 30GHz | 9 kHz ~ 40 GHz |
| Isolation | 60dB | - |
| Insertion Loss | 2dB | - |
| Test Frequency | 30GHz | - |
| P1d B | 28dBm | - |
| IIP3 | 52dBm | - |
| Impedance | 50Ohm | 50 Ohms |
| Voltage - Supply | 3.3V | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Attenuation Value | - | 2dB ~ 30dB |
The ADRF5721BCCZN is a silicon-on-insulator (SOI) digital step attenuator, while the ADRF5021BCCZN is a non-reflective single-pole double-throw (SPDT) RF switch. The ADRF5721 provides programmable attenuation, whereas the ADRF5021 routes RF signals between two paths.
Both devices are offered in a 20-terminal LGA package (LCC-20-1) with the same 4 mm × 4 mm footprint. However, pin functions differ between the attenuator and the switch, so they are not pin-for-pin interchangeable despite package similarity.
The ADRF5721BCCZN operates from 9 kHz to 40 GHz. The ADRF5021BCCZN operates from 9 kHz to 30 GHz. The attenuator therefore extends to a higher upper frequency limit than the switch.
The ADRF5721BCCZN uses a serial peripheral interface (SPI) with 6-bit parallel control for attenuation setting. The ADRF5021BCCZN uses a single positive control voltage (0 V / 3.3 V logic) to select between its two RF output ports.
The ADRF5721BCCZN provides attenuation range up to 31.5 dB in 0.5 dB steps, with low insertion loss and high linearity. It operates on a dual supply of +3.3 V and −3.3 V and is specified for 50 Ω systems.
The ADRF5021BCCZN is a non-reflective SPDT switch with low insertion loss, high isolation, and high linearity across 9 kHz to 30 GHz. It operates on a dual supply of +3.3 V and −3.3 V and is controlled by a single positive logic input.
Yes. Because they serve complementary functions—signal routing (switch) and amplitude control (attenuator)—they can be cascaded in a common RF chain, provided the system frequency range does not exceed the 30 GHz limit of the ADRF5021BCCZN.
Yes. Both devices are manufactured by Analog Devices and are RoHS compliant, as indicated by the "Z" suffix in the ordering part number and confirmed in the respective manufacturer datasheets.