ADS1210U vs ADS1211UG4

Bảng so sánh chi tiết giữa ADS1210U và ADS1211UG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1211UG4 is a functionally compatible replacement candidate for the ADS1210U, sharing the same 24-bit delta-sigma ADC core, SPI-compatible serial interface, and SOIC-24 footprint. The primary distinction is the ADS1211UG4's integrated 4-channel input multiplexer versus the single-channel input of the ADS1210U, which broadens application flexibility but requires validation of the input configuration and channel-selection logic in the target design.

Resolution and ADC Architecture High match
Package and Pin Configuration High match
Input Channel Configuration Validation required
Digital Interface High match

Parts at a glance

Part A

ADS1210U

Texas Dụng cụ

Lifecycle
Active
Stock
5384 PCS
Package
SOIC-8
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS1211UG4

Texas Dụng cụ

Lifecycle
Active
Stock
7896 PCS
Package
SOIC-24
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1210U ADS1211UG4 Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma ADCs, so resolution is identical and not a differentiator for substitutability.
Number of input channels 1 (single-ended) 4 (differential/multiplexed) The ADS1211 provides a 4-channel input multiplexer while the ADS1210 is single-channel; this is the primary functional difference affecting system architecture.
Interface type SPI-compatible serial (3-wire) SPI-compatible serial (3-wire) Both use the same serial interface, so firmware and host connectivity are compatible.
Supply voltage (analog) 5 V 5 V Identical analog supply requirements allow the same power rail design.
Package 18-pin SOIC (D) 24-pin SOIC (DW) Different package pin counts and footprints mean the boards are not drop-in interchangeable without layout changes.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Same industrial temperature range, so environmental suitability is equivalent.
Data output rate (max) Up to ~15.6 kSPS (programmable) Up to ~15.6 kSPS (programmable) Identical programmable output rates support the same sampling throughput requirements.
Internal PGA gain range 1 to 128 (programmable) 1 to 128 (programmable) Same programmable gain amplifier range enables comparable low-level signal conditioning.
Reference input External differential reference External differential reference Both require an external reference, so reference design and accuracy budgeting are unchanged.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1210U ADS1211UG4
Supplier - Texas Instruments
Part Status Last Time Buy Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 16k 16k
Number of Inputs 1 4
Input Type Differential Differential
Data Interface SPI SPI
Configuration PGA-ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS1210U and ADS1211UG4?

The ADS1210U is a single-channel 24-bit delta-sigma ADC in a 24-pin SOIC package, while the ADS1211UG4 is a four-channel (differential input) 24-bit delta-sigma ADC in a 28-pin SOIC package. The ADS1211UG4 provides additional input channels and a larger package, while both share the same core 24-bit architecture, programmable gain amplifier, and serial interface family from Texas Instruments.

Are the ADS1210U and ADS1211UG4 pin-compatible?

No. The ADS1210U uses a 24-pin SOIC (DW) package, and the ADS1211UG4 uses a 28-pin SOIC (DW) package. The different pin counts and pinouts mean they are not drop-in replacements and require different PCB footprints.

Do both devices offer the same resolution and data rate?

Both are 24-bit delta-sigma ADCs from the same ADS121x family and support programmable output data rates and gain settings. However, exact achievable effective resolution and data rate combinations depend on the specific configuration and should be confirmed against the respective Texas Instruments datasheets for each part number.

How many input channels does each device support?

The ADS1210U provides a single differential input channel. The ADS1211UG4 provides four input channels, allowing multiplexed measurement of multiple signal sources without external multiplexing circuitry.

Can the ADS1211UG4 be used as a replacement for the ADS1210U in an existing design?

Not directly. Because the ADS1211UG4 has a different package size, pin count, and channel configuration, substituting it for the ADS1210U requires a PCB redesign and firmware review. The replacement should only be made after validating all electrical and timing differences against the official Texas Instruments datasheets.

What package types are used for these two parts?

Both parts are offered in SOIC packages. The ADS1210U is in a 24-pin SOIC, and the ADS1211UG4 is in a 28-pin SOIC. The "G4" suffix on the ADS1211UG4 denotes a lead-free (RoHS-compliant) package variant per Texas Instruments ordering conventions.

Do both devices use the same serial interface for communication?

Both devices belong to the ADS121x family and use a serial interface for configuration and data readout. Designers should verify the exact interface timing, register map, and command set in the respective datasheets, since channel count differences affect the configuration registers.