ADS1220IPW
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 4062 PCS
- Package
- TSSOP-16
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS1220IPW và ADS1202IPWRG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS1220IPW and ADS1202IPWRG4 are not drop-in replacements for one another. The ADS1220IPW is a 24-bit precision delta-sigma ADC with an integrated PGA and SPI interface, while the ADS1202IPWRG4 is a 16-bit isolated delta-sigma modulator with a single-bit output stream. Their differing resolution, output architecture, and interface requirements make direct substitution impractical without redesigning the surrounding signal chain.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1220IPW | ADS1202IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma (with PGA and input MUX) | Delta-Sigma modulator | The ADS1220 integrates a PGA and multiplexer for direct sensor connection, while the ADS1202 is a modulator-only device requiring external digital filtering, affecting system design and substitutability. |
| Number of input channels | 4 (2 differential / 4 single-ended) | 1 (differential) | Channel count determines how many signals can be measured; the ADS1220 supports multi-channel sensing while the ADS1202 handles a single differential input. |
| Output interface | SPI | Digital bit-stream (modulator output) | The output format dictates how the host processor reads data; SPI provides a standard register-based interface, whereas the ADS1202 outputs a raw modulator bit-stream needing external filtering. |
| Programmable gain amplifier (PGA) | Yes (gain 1 to 128) | No | An integrated PGA allows direct amplification of small sensor signals, simplifying the analog front end; its absence in the ADS1202 requires external amplification. |
| Supply voltage (analog) | 2.3 V to 5.5 V | 4.5 V to 5.5 V | The wider supply range of the ADS1220 allows operation from lower-voltage rails, while the ADS1202 requires a nominal 5 V supply, affecting power-supply compatibility. |
| Package | TSSOP-16 | TSSOP-8 | Package footprint and pin count affect PCB layout and drop-in compatibility; the two devices are not pin-compatible. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +85 °C | The wider temperature range of the ADS1220 suits harsher environments, whereas the ADS1202 is limited to standard industrial temperature conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1220IPW | ADS1202IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 2k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2, 4 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-PGA-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal, Supply | - |
| Voltage - Supply, Analog | 2.3V ~ 5.5V, ±2.5 | - |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | - |
| Features | PGA, Temperature Sensor | - |
The ADS1220IPW is a 24-bit, 4-channel delta-sigma analog-to-digital converter (ADC) with an integrated programmable gain amplifier (PGA), voltage reference, and SPI interface, designed for precision sensor measurement. The ADS1202IPWRG4 is a 16-bit, single-channel delta-sigma modulator that outputs a 1-bit data stream for external digital filtering, typically used in isolated current-sense and motor-control applications. They differ fundamentally in resolution, channel count, output format, and integration level.
No. The ADS1220IPW is supplied in a 16-pin TSSOP (PW) package, while the ADS1202IPWRG4 is supplied in a 16-pin TSSOP (PW) package as well, but the pin functions and internal architecture differ. The ADS1220 provides a complete ADC with SPI and GPIO pins, whereas the ADS1202 provides a modulator with clock and data outputs. They are not directly interchangeable and require different external circuitry and firmware.
The ADS1220IPW provides 24-bit resolution with a digital SPI output delivering fully converted codes. The ADS1202IPWRG4 is a 16-bit delta-sigma modulator that outputs a 1-bit serial bitstream (MDAT) at a rate determined by the external clock (MCLK), requiring an external digital filter (e.g., sinc filter) to reconstruct the 16-bit data word. The ADS1220 integrates the digital filter and outputs finished conversion results.
The ADS1220IPW offers 4 single-ended or 2 differential input channels with an integrated PGA and input multiplexer. The ADS1202IPWRG4 provides a single differential input channel (AINP/AINN) intended for direct connection to a shunt or sensor, without an integrated multiplexer or PGA. Channel-count requirements therefore strongly influence device selection.
The ADS1220IPW operates from an analog supply (AVDD) of 2.3 V to 5.5 V and a digital supply (DVDD) of 2.3 V to 5.5 V, with an SPI-compatible serial interface. The ADS1202IPWRG4 operates from a 5 V analog supply (AVDD) and a 3 V to 5.5 V digital supply (DVDD), with a modulator clock input (MCLK) and a 1-bit data output (MDAT). Interface and supply requirements must be matched to the host system.
The ADS1202IPWRG4 is specifically intended for isolated current-sense and motor-control applications because its 1-bit modulator output can be transmitted across an isolation barrier (e.g., via a digital isolator) and filtered on the controller side. The ADS1220IPW, with its integrated PGA, reference, and SPI output, is better suited for precision multi-sensor measurement systems where isolation is not the primary requirement.
Both devices are specified for the industrial temperature range of -40°C to +125°C (TA), as documented in their respective manufacturer datasheets. Designers should still verify the specific grade and package suffix against the latest datasheet before finalizing thermal and reliability calculations.
No. The ADS1220IPW outputs fully converted SPI data, while the ADS1202IPWRG4 outputs a 1-bit modulator stream requiring external digital filtering. Replacing one with the other requires changes to the host firmware, clocking scheme, and external filter or interface circuitry. A direct drop-in replacement is not possible.