ADS1222IPWR
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 3095 PCS
- Package
- TSSOP-14
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS1222IPWR và ADS1202IPWRG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS1222IPWR and ADS1202IPWRG4 are not drop-in replacements for one another. Although both are 24-bit delta-sigma analog-to-digital converters in a TSSOP-16 package, they differ fundamentally in resolution architecture, output interface, channel configuration, and intended application, so substituting one for the other requires full design validation.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1222IPWR | ADS1202IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma (24-bit) | Delta-Sigma (16-bit) | Both are delta-sigma converters, but the differing resolution reflects different internal modulator designs and intended accuracy classes. |
| Input Type | Differential | Differential | Differential inputs reject common-mode noise; both parts share this, supporting similar sensor interfacing topologies. |
| Number of Input Channels | 2 (differential) | 1 (differential) | Channel count affects how many signals can be measured without external multiplexing; the ADS1222 offers an extra differential channel. |
| Output Interface | SPI / serial | Serial (modulator bitstream) | The output format dictates the digital host interface; the ADS1202 outputs a raw modulator bitstream requiring external filtering, while the ADS1222 provides a filtered digital word. |
| Supply Voltage (V) | 2.7 to 5.5 | 4.5 to 5.5 | Supply range determines compatibility with low-voltage logic and battery-powered systems; the ADS1222 supports lower supply rails. |
| Package | TSSOP-16 | TSSOP-16 | Package footprint affects PCB layout and drop-in compatibility; both share the same TSSOP-16 outline. |
| Operating Temperature Range (°C) | -40 to +85 | -40 to +85 | Industrial temperature range ensures reliable operation across harsh environments; both parts meet the same range. |
| Data Rate / Output Word Rate | Up to ~2 kSPS (programmable) | Up to ~10 MHz modulator clock | Output rate affects measurement bandwidth and settling time; the ADS1202's modulator clock enables higher raw sampling with external digital filtering. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1222IPWR | ADS1202IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 240 | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Single Supply |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 2 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | MUX-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.5V | - |
| Features | Temperature Sensor | - |
The ADS1222IPWR is a 24-bit delta-sigma analog-to-digital converter with a two-channel differential input multiplexer, internal oscillator, and a programmable gain amplifier, typically housed in a TSSOP-16 package. The ADS1202IPWRG4 is a 16-bit delta-sigma modulator with a single differential input, designed for isolated signal conditioning and current shunt measurements, typically housed in a TSSOP-8 package. They differ in resolution, channel count, package pinout, and intended application architecture.
No. The ADS1222IPWR is supplied in a 16-pin TSSOP package, while the ADS1202IPWRG4 is supplied in an 8-pin TSSOP package. The pin counts and pin functions differ, so they cannot be interchanged on the same PCB land pattern without redesign.
No. Beyond package and pinout differences, the ADS1222IPWR integrates a digital filter and provides a complete ADC output, whereas the ADS1202IPWRG4 is a modulator that outputs a 1-bit data stream requiring an external digital filter (typically an FPGA or DSP sinc filter). A direct replacement is not possible without changes to the PCB, signal chain, and digital processing.
The ADS1222IPWR provides 24-bit resolution with a serial peripheral interface output after internal digital filtering. The ADS1202IPWRG4 is a 16-bit delta-sigma modulator that outputs a 1-bit oversampled data stream, with the effective 16-bit resolution achieved after external digital filtering. The output formats and system partitioning are therefore fundamentally different.
Both devices are specified for a single 5 V analog supply in their respective datasheets, with the ADS1222IPWR also supporting a separate digital supply. Designers should verify the exact recommended operating conditions, including digital I/O levels, in the respective manufacturer datasheets before comparing supply architectures.
The ADS1202IPWRG4 is specifically intended for isolated current-shunt measurement architectures, as its modulator output can be coupled across an isolation barrier and filtered on the controller side. The ADS1222IPWR is a general-purpose 24-bit ADC with an integrated filter and multiplexer, better suited to direct multi-channel sensor measurement without an isolation barrier.
No. The ADS1222IPWR features a two-channel differential input multiplexer with a programmable gain amplifier, allowing selection between input channels and gain settings. The ADS1202IPWRG4 has a single differential input without an integrated input multiplexer or PGA. Input flexibility and front-end design requirements therefore differ significantly.