ADS1230IPW vs ADS1208IPWRG4

Bảng so sánh chi tiết giữa ADS1230IPW và ADS1208IPWRG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1230IPW and ADS1208IPWRG4 are not functionally interchangeable. Although both are 16-bit delta-sigma analog-to-digital converters in TSSOP packages, they differ fundamentally in resolution architecture, input configuration, output interface, and target application, so the ADS1208IPWRG4 cannot serve as a direct substitute for the ADS1230IPW in an existing design.

Different output interface Different input configuration Different modulator architecture Different application focus

Parts at a glance

Part A

ADS1230IPW

Texas Dụng cụ

Lifecycle
Active
Stock
2859 PCS
Package
TSSOP-16
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS1208IPWRG4

Texas Dụng cụ

Lifecycle
Active
Stock
4872 PCS
Package
TSSOP-16
Series
Data Acquisition - ADCs-DACs - Special Purpose

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1230IPW ADS1208IPWRG4 Why it matters
Resolution (bits) 20 16 Higher resolution enables finer measurement of small signal changes, which is critical for precision sensor and weigh-scale applications.
Architecture Delta-Sigma (low-noise PGA front end) Delta-Sigma modulator The ADS1230 integrates a PGA and full ADC signal chain, while the ADS1208 is a modulator-only device requiring external digital filtering, affecting system complexity and design effort.
Input type Differential Differential Differential inputs reject common-mode noise, improving accuracy in electrically noisy environments.
Output interface Serial (SPI-compatible, 2-wire) Serial bit-stream (modulator output) The ADS1230 provides a complete digital output word, whereas the ADS1208 outputs a raw 1-bit modulator stream that must be processed by an external digital filter, changing the host interface requirements.
Supply voltage (analog) 2.7 V to 5.3 V 4.5 V to 5.5 V The wider supply range of the ADS1230 allows operation from lower-voltage rails, while the ADS1208 requires a nominal 5 V supply, affecting power-supply design and compatibility.
Data rate / output word rate 10 SPS or 80 SPS (selectable) Up to 40 kSPS (modulator clock dependent) The ADS1230 targets slow, high-precision measurements, while the ADS1208 supports much higher sampling rates for faster dynamic signals, making them suited to different application classes.
Package 16-pin TSSOP 16-pin TSSOP Matching package and pin count can simplify board-level substitution, though pin functions must still be verified.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ratings mean both parts can serve the same environmental conditions.
Integrated PGA Yes (gain 1 to 128) No The ADS1230's on-chip PGA allows direct connection of low-level sensors without external amplification, whereas the ADS1208 requires external signal conditioning.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1230IPW ADS1208IPWRG4
Supplier - Texas Instruments
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 80 40k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 2.7V ~ 5.5V, 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 20 -
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration PGA-ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 2.7V ~ 5.3V -
Voltage - Supply, Digital 2.7V ~ 5.3V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1230IPW and ADS1208IPWRG4?

The ADS1230IPW is a 20-bit delta-sigma analog-to-digital converter designed primarily for weigh scales and strain gauge applications, featuring an on-chip low-noise PGA with gains of 1, 2, 64, and 128. The ADS1208IPWRG4 is a 16-bit second-order delta-sigma modulator intended for isolated signal acquisition and current sensing, providing a single-bit modulator output stream rather than a parallel digital conversion result.

Do the ADS1230IPW and ADS1208IPWRG4 have compatible output interfaces?

No. The ADS1230IPW provides a serial SPI-compatible interface with a 20-bit conversion result, while the ADS1208IPWRG4 outputs a single-bit delta-sigma modulator data stream that requires an external digital filter or FPGA/processor to decimate and reconstruct the digital word. The two output formats are not directly interchangeable.

Are the ADS1230IPW and ADS1208IPWRG4 pin-to-pin compatible?

No. The ADS1230IPW is supplied in a 16-pin TSSOP package, and the ADS1208IPWRG4 is supplied in a 16-pin TSSOP package as well, but their pin functions and internal architectures differ. Pin-to-pin substitution is not supported; each device must be evaluated against its own datasheet pinout and application circuit.

What are the typical input signal ranges and PGA options for each device?

The ADS1230IPW integrates a low-noise PGA with selectable gains of 1, 2, 64, and 128, supporting low-level differential sensor signals such as those from load cells. The ADS1208IPWRG4 is a modulator without an integrated PGA in the same sense; its input range and signal conditioning are defined by the external analog front-end and the modulator's specified full-scale input range per the datasheet.

Which device is better suited for isolated current-sensing or shunt-based measurement?

The ADS1208IPWRG4 is intended for isolated signal acquisition and current sensing, as its modulator output can be passed across an isolation barrier and digitally filtered on the isolated or non-isolated side. The ADS1230IPW is optimized for direct low-frequency sensor digitization such as weigh scales and is not specified as an isolation-oriented modulator.

Can the ADS1230IPW directly replace the ADS1208IPWRG4 in an existing design?

No. The devices differ in resolution (20-bit vs 16-bit modulator), output format (SPI serial data vs single-bit modulator stream), and intended application. A direct replacement would require redesign of the digital interface, filtering, and signal chain, and must be validated against the manufacturer datasheets for both parts.

What supply voltage and package options should be considered when comparing these two parts?

Both devices are offered in 16-pin TSSOP packages. The ADS1230IPW operates from a single analog supply in the 2.7 V to 5.3 V range per its datasheet, while the ADS1208IPWRG4 has its own specified supply requirements documented by the manufacturer. Designers should confirm exact supply rails, reference requirements, and package thermal characteristics from the respective official datasheets before layout.