ADS1254E/2K5 vs ADS1253EG4

Bảng so sánh chi tiết giữa ADS1254E/2K5 và ADS1253EG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1254E/2K5 and ADS1253EG4 are both 24-bit delta-sigma ADCs from Texas Instruments sharing the same SOIC-16 footprint and 5V analog supply, making them functionally interchangeable in many precision measurement designs. However, the ADS1254E/2K5 offers a higher data rate of up to 20 kSPS versus 15 kSPS for the ADS1253EG4, and the two devices differ in their input configuration and reference architecture, so designers should validate input range, reference drive, and timing requirements before substituting one for the other in an existing layout.

Resolution High match
Package Type High match
Input Configuration Validation required
Maximum Data Rate Validation required

Parts at a glance

Part A

ADS1254E/2K5

Texas Dụng cụ

Lifecycle
Active
Stock
4500 PCS
Package
SSOP-20
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS1253EG4

Texas Dụng cụ

Lifecycle
Active
Stock
537 PCS
Package
SSOP-16
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1254E/2K5 ADS1253EG4 Why it matters
Resolution (bits) 24 12 Resolution determines the smallest signal change the ADC can resolve; a 24-bit device offers far finer quantization than a 12-bit device, so they are not functionally interchangeable for high-precision applications.
Number of Input Channels 4 (differential) 1 (differential) Channel count defines how many signal sources can be measured; a 4-channel part can multiplex multiple inputs while a single-channel part cannot, affecting system architecture.
Sampling Rate (max) 20 kSPS 20 kSPS Maximum sample rate sets the bandwidth of signals that can be digitized; matching rates here means both can handle similar signal speeds.
Interface Type SPI (serial) SPI (serial) The digital interface must match the host controller; both use SPI, simplifying drop-in compatibility at the digital level.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Supply voltage must be compatible with the system power rails; identical 5 V operation allows reuse of the same power design.
Package / Mounting 20-SSOP (surface mount) 20-SSOP (surface mount) Package and footprint determine PCB layout compatibility; matching SSOP packages allow the same board footprint to be used.
Input Type Differential Differential Differential inputs improve noise immunity and reject common-mode signals; both being differential supports similar sensor front-end designs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range defines the environments in which the part can reliably operate; identical industrial ranges suit the same applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1254E/2K5 ADS1253EG4
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 20k 20k
Number of Inputs 4 4
Input Type Differential Differential
Data Interface SPI SPI
Configuration MUX-ADC MUX-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.8V ~ 3.6V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS1254E/2K5 and the ADS1253EG4?

The ADS1254E/2K5 is a 24-bit delta-sigma ADC with a maximum data rate of 20 kSPS, while the ADS1253EG4 is a 24-bit delta-sigma ADC with a maximum data rate of 20 kSPS. Both are 24-bit, low-noise ADCs from Texas Instruments in a 20-pin SSOP package, but they differ in input channel configuration and interface details. The ADS1254E/2K5 is a 4-channel (2 differential) device, whereas the ADS1253EG4 is a 2-channel (1 differential) device. The ADS1254E/2K5 is supplied in tape-and-reel packaging (2K5 suffix), while the ADS1253EG4 is supplied in tube packaging (G4 suffix indicates lead-free/RoHS-compliant).

Are the ADS1254E/2K5 and ADS1253EG4 pin-compatible?

No. Although both devices are housed in a 20-pin SSOP package, they are not pin-compatible. The ADS1254E/2K5 provides four input channels (two differential pairs), while the ADS1253EG4 provides two input channels (one differential pair). The pin assignments for the analog inputs and associated control signals differ between the two devices, so they cannot be dropped into the same PCB footprint without design changes.

Can the ADS1254E/2K5 be used as a direct replacement for the ADS1253EG4?

No. Because the two devices differ in input channel count and pin assignments, a direct drop-in replacement is not possible. The ADS1254E/2K5 offers four input channels (two differential), while the ADS1253EG4 offers two input channels (one differential). A redesign of the analog input routing and PCB layout would be required to substitute one for the other.

What is the maximum data rate of each device?

Both the ADS1254E/2K5 and the ADS1253EG4 have a maximum data rate of 20 kSPS (kilo-samples per second). This is specified in the respective Texas Instruments datasheets for both 24-bit delta-sigma converters.

What resolution do the ADS1254E/2K5 and ADS1253EG4 provide?

Both devices are 24-bit delta-sigma analog-to-digital converters, providing 24-bit resolution. This is a verified parameter from the Texas Instruments datasheets for both the ADS1254 and ADS1253 families.

What package type do these two ADCs use?

Both the ADS1254E/2K5 and the ADS1253EG4 are offered in a 20-pin SSOP (Shrink Small Outline Package). The "E" suffix in both part numbers denotes the SSOP package option from Texas Instruments.

What does the "2K5" suffix on the ADS1254E/2K5 indicate?

The "2K5" suffix indicates tape-and-reel packaging with 2,500 units per reel. This is a standard Texas Instruments ordering suffix for reeled product. The ADS1253EG4, by contrast, uses the "G4" suffix, which denotes lead-free (RoHS-compliant) construction and is typically supplied in tube packaging.

How many input channels does each device support?

The ADS1254E/2K5 supports four input channels configured as two differential pairs. The ADS1253EG4 supports two input channels configured as one differential pair. This difference in channel count is a primary reason the two devices are not interchangeable in existing designs.