ADS1271IBPWR
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 6728 PCS
- Package
- TSSOP-16
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS1271IBPWR và ADS1212U cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS1271IBPWR and ADS1212U are both 24-bit delta-sigma analog-to-digital converters, but they differ fundamentally in resolution architecture, sample rate, package footprint, and digital interface, so the ADS1212U cannot serve as a direct drop-in substitute for the ADS1271IBPWR without redesign and validation.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1271IBPWR | ADS1212U | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 22 | Higher resolution provides finer measurement granularity; a 24-bit ADC can resolve smaller signal changes than a 22-bit device. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma conversion, but the specific modulator design affects noise shaping, latency, and achievable sample rates. |
| Max Sample Rate (SPS) | 105k | 6.25k | The maximum output data rate determines the bandwidth of signals the ADC can capture; the ADS1271 supports much faster sampling. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator for substitutability. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital communication level. |
| Supply Voltage (analog) | 5 V | 5 V | Matching analog supply requirements allows reuse of the same power rail design. |
| Package | TSSOP-16 | SOIC-18 | Different package footprints require PCB layout changes, affecting direct board-level substitutability. |
| Operating Temperature Range | -40 to +105 °C | -40 to +85 °C | A wider temperature range supports use in harsher environments; the ADS1271 offers greater thermal headroom. |
| Input Type | Differential | Differential | Differential inputs improve common-mode noise rejection; both devices share this characteristic. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1271IBPWR | ADS1212U |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 24 | 22 |
| Sampling Rate(Per Second) | 105k | 6.25k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | 5V |
| Features | - | PGA |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
The ADS1271IBPWR is a 24-bit, single-channel, delta-sigma analog-to-digital converter with a maximum data rate of 105 kSPS, housed in a TSSOP-16 package. The ADS1212U is a 22-bit, single-channel, delta-sigma ADC with a maximum data rate of 6.25 kSPS, housed in a SOIC-18 package. The ADS1271IBPWR offers higher resolution and significantly faster sampling, while the ADS1212U provides lower speed with a different package footprint.
No. The ADS1271IBPWR uses a 16-pin TSSOP package, while the ADS1212U uses an 18-pin SOIC package. The pin counts, pin functions, and package dimensions differ, so they are not pin-to-pin compatible and cannot be dropped into the same PCB land pattern without redesign.
The ADS1271IBPWR supports data rates up to 105 kSPS in high-speed mode. The ADS1212U supports a maximum data rate of 6.25 kSPS. The ADS1271IBPWR is therefore suitable for higher-bandwidth signal acquisition, while the ADS1212U targets lower-speed precision measurement applications.
The ADS1271IBPWR is a 24-bit delta-sigma ADC. The ADS1212U is a 22-bit delta-sigma ADC. The ADS1271IBPWR provides two additional bits of resolution compared with the ADS1212U, which can matter in high-dynamic-range measurement systems.
Yes. Both the ADS1271IBPWR and the ADS1212U provide a serial digital interface for communication with a host controller. The ADS1271IBPWR uses a SPI-compatible serial interface, and the ADS1212U also provides a serial interface for output data and configuration. Designers should consult the respective datasheets for exact timing and protocol details.
The ADS1271IBPWR operates with an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 1.8 V to 3.3 V, with a separate reference input. The ADS1212U operates from a single 5 V supply with a reference input. Exact supply ranges and tolerances should be verified in the respective manufacturer datasheets before design.
The ADS1271IBPWR is better suited for high-speed data acquisition because its maximum data rate of 105 kSPS is significantly higher than the 6.25 kSPS maximum of the ADS1212U. The ADS1271IBPWR also offers 24-bit resolution, making it appropriate for wide-bandwidth precision measurement systems.
No. The two devices differ in package type and pin count (TSSOP-16 vs SOIC-18), resolution (24-bit vs 22-bit), maximum data rate (105 kSPS vs 6.25 kSPS), and supply architecture. A direct replacement is not possible without PCB redesign and firmware adjustment, and the performance differences must be validated against the target application requirements.