ADS5400IPZP
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 7717 PCS
- Package
- HTQFP-100
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS5400IPZP và ADS5444IPFP cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS5400IPZP and ADS5444IPFP are both 12-bit analog-to-digital converters, but they differ fundamentally in sampling rate, analog input bandwidth, package footprint, and power consumption. The ADS5400IPZP offers a 1 GSPS sampling rate in a 100-pin HTQFP package, while the ADS5444IPFP provides 250 MSPS in an 80-pin HTQFP package. These differences in speed, bandwidth, and board layout make direct substitution impractical without significant redesign of the signal chain and PCB.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS5400IPZP | ADS5444IPFP | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 13 bit | Higher resolution provides finer quantization and better SNR, affecting measurement accuracy and dynamic range. |
| Sampling Rate | 1 GSPS | 250 MSPS | Maximum sample rate determines the input bandwidth and the highest signal frequency that can be digitized. |
| Input Type | Differential | Differential | Differential inputs improve common-mode noise rejection and even-order harmonic performance. |
| Output Interface | LVDS (DDR) | LVDS (DDR) | The digital output format must match the receiving FPGA/ASIC interface for direct compatibility. |
| Supply Voltage | 3.3 V analog / 1.8 V digital | 3.3 V analog / 3.3 V digital | Supply rail requirements affect board power design and level-shifting needs when substituting parts. |
| Power Consumption | Approx. 2.7 W | Approx. 1.4 W | Power dissipation impacts thermal design, supply sizing, and overall system efficiency. |
| Package | 100-pin HTQFP (PZP) | 80-pin HTQFP (PFP) | Package footprint and pin count must match the PCB layout for a drop-in replacement. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Industrial temperature range ensures reliable operation across the intended application environment. |
| Analog Input Bandwidth | Approx. 1.5 GHz | Approx. 500 MHz | Input bandwidth limits the maximum frequency of signals that can be accurately sampled. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS5400IPZP | ADS5444IPFP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 12 | 13 |
| Sampling Rate(Per Second) | 1G | 250M |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | LVDS - Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Pipelined | Pipelined |
| Reference Type | External, Internal | Internal |
| Voltage - Supply, Analog | 3.135V ~ 3.465V, 5V | 5V |
| Voltage - Supply, Digital | 3.135V ~ 3.465V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | Temperature Sensor | - |
The ADS5400IPZP is a 12-bit, 1-GSPS analog-to-digital converter (ADC) in a 100-pin HTQFP (PZP) package, while the ADS5444IPFP is a 13-bit, 250-MSPS ADC in a 80-pin HTQFP (PFP) package. The ADS5400 offers higher sample rate and lower resolution, whereas the ADS5444 provides higher resolution at a lower sample rate. Both are from Texas Instruments and operate from a 5-V analog supply with LVDS-compatible outputs.
No. The ADS5400IPZP uses a 100-pin HTQFP (PZP) package, and the ADS5444IPFP uses an 80-pin HTQFP (PFP) package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.
The ADS5400IPZP supports a maximum sample rate of 1 GSPS (1,000 MSPS). The ADS5444IPFP supports a maximum sample rate of 250 MSPS. The sample rate difference is a primary selection criterion between the two devices.
The ADS5400IPZP provides 12-bit resolution with LVDS-compatible DDR output data. The ADS5444IPFP provides 13-bit resolution with LVDS-compatible DDR output data. Both devices are designed for high-speed signal acquisition and use differential clock and analog inputs.
Both devices operate from a 5-V analog supply (AVDD) and require a separate 3.3-V digital supply (DVDD) for their output and digital circuitry, consistent with the Texas Instruments datasheets. Designers should verify the exact recommended operating conditions and decoupling requirements in the respective datasheets before finalizing the power design.
They serve different roles. The ADS5400IPZP is suited to very high sample rate applications such as wideband digitizers, radar, and test instrumentation where 1 GSPS is required. The ADS5444IPFP is suited to applications needing 13-bit resolution at up to 250 MSPS, such as medical imaging and communications receivers. They are not interchangeable in a given socket without redesign.
Both ADCs use differential analog inputs and differential clock inputs, and both provide LVDS-compatible DDR output data. The ADS5400IPZP is specified for a 1-GSPS maximum clock rate, while the ADS5444IPFP is specified for a 250-MSPS maximum clock rate. Exact input voltage ranges and clock requirements should be confirmed in the respective Texas Instruments datasheets.
Select the ADS5444IPFP when 13-bit resolution is the priority and the signal bandwidth fits within a 250-MSPS sample rate. Select the ADS5400IPZP when a 1-GSPS sample rate is required and 12-bit resolution is sufficient. The choice depends on the application's dynamic range and bandwidth requirements.