ADS7809UB vs ADS7800KUG4

Bảng so sánh chi tiết giữa ADS7809UB và ADS7800KUG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7809UB and ADS7800KUG4 are not drop-in replacements for one another. They differ in resolution, analog input architecture, digital interface, and package footprint, so substituting one for the other requires a full electrical and mechanical redesign rather than a direct swap.

Different resolution Different input architecture Different digital interface Different package footprint

Parts at a glance

Part A

ADS7809UB

Texas Dụng cụ

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS7800KUG4

Texas Dụng cụ

Lifecycle
Active
Stock
2642 PCS
Package
SOIC-24
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7800KUG4 Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest analog increment the ADC can distinguish; a 16-bit device provides 16x finer quantization than a 12-bit device, directly affecting measurement precision and dynamic range.
Sampling Rate 100 kSPS 333 kSPS Maximum throughput limits the highest signal frequency that can be digitized; the faster ADS7800 supports higher-bandwidth signals while the ADS7809 trades speed for resolution.
Input Type Single-ended Single-ended Input configuration determines how the analog source must be connected; both are single-ended, so signal conditioning requirements are similar.
Supply Voltage 5 V (single supply) 5 V and -5 V (dual supply) Supply requirements affect board-level power design; the ADS7809 runs from a single 5 V rail while the ADS7800 needs a bipolar supply, changing power architecture compatibility.
Interface Serial (SPI/QSPI compatible) Parallel The digital interface dictates how the ADC connects to the host processor; serial reduces pin count and routing, while parallel offers higher data throughput and simpler timing.
Package SOIC-28 SOIC-24 Package footprint and pin count determine PCB layout compatibility; different packages require board redesign and cannot be drop-in substituted.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range defines the environments in which the part is guaranteed to meet specifications; identical ranges mean similar environmental applicability.
Integral Nonlinearity (INL) ±2 LSB (max) ±0.5 LSB (max) INL measures deviation from an ideal transfer function; lower INL yields more accurate absolute measurements, and the LSB weighting differs between the two resolutions.
Reference Internal reference Internal reference An internal reference simplifies system design by removing the need for an external precision reference; both devices include one, easing analog front-end design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7800KUG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 16 12
Sampling Rate(Per Second) 100k 333k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal Internal
Voltage - Supply, Analog 5V 5V, -11.4V ~ 16.5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809UB and ADS7800KUG4?

The ADS7809UB is a 16-bit successive-approximation ADC with a serial interface, while the ADS7800KUG4 is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a serial output, whereas the ADS7800KUG4 provides a parallel data bus and lower resolution. Both are single-channel ADCs, but they differ in resolution, interface type, and package.

Are the ADS7809UB and ADS7800KUG4 pin-compatible?

No. The ADS7809UB is offered in a 28-pin SOIC package, while the ADS7800KUG4 is offered in a 28-pin SOIC package as well, but their pin functions and internal architectures differ due to different resolution and interface types (serial vs parallel). They are not pin-compatible and cannot be directly substituted without redesign.

What are the resolution and sampling rate specifications for each device?

The ADS7809UB provides 16-bit resolution with a maximum sampling rate of 100 kSPS. The ADS7800KUG4 provides 12-bit resolution with a maximum sampling rate of 333 kSPS. These parameters are verified from the respective manufacturer datasheets.

What interface types do the ADS7809UB and ADS7800KUG4 use?

The ADS7809UB uses a serial interface for data output, which reduces pin count and simplifies isolation. The ADS7800KUG4 uses a parallel interface, providing simultaneous access to all data bits, which is suitable for high-speed microprocessor connections. The interface choice affects system design and PCB layout.

What are the input voltage ranges for these ADCs?

The ADS7809UB supports a bipolar input range of ±10 V (with a 20 Vpp input span) when configured appropriately, as specified in its datasheet. The ADS7800KUG4 supports a bipolar input range of ±10 V as well. Both devices are designed for industrial signal acquisition with wide input ranges.

Can the ADS7809UB be used as a drop-in replacement for the ADS7800KUG4?

No. Due to differences in resolution (16-bit vs 12-bit), interface type (serial vs parallel), and pin functions, the ADS7809UB is not a drop-in replacement for the ADS7800KUG4. A redesign of the digital interface and PCB layout would be required. Always verify against the latest manufacturer datasheets before substitution.

What are the typical power supply requirements for each device?

The ADS7809UB operates from a single +5 V supply for the analog and digital sections, with an additional +5 V or ±5 V for the input amplifier depending on configuration, as per its datasheet. The ADS7800KUG4 operates from a +5 V supply and a ±12 V or ±15 V supply for the analog section. Power supply design must account for these differences.

Which device is better suited for high-resolution industrial measurement applications?

The ADS7809UB is better suited for high-resolution industrial measurement due to its 16-bit resolution, which provides finer quantization steps (approximately 305 µV per LSB over a ±10 V range) compared to the 12-bit ADS7800KUG4 (approximately 4.88 mV per LSB over a ±10 V range). However, the ADS7800KUG4 offers a faster sampling rate (333 kSPS vs 100 kSPS) for applications requiring higher throughput at lower resolution.