ADS7844N
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 1495 PCS
- Package
- SSOP-20
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS7844N và ADS7841EG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7841EG4 is a functional replacement candidate for the ADS7844N, sharing the same 12-bit SAR architecture, SPI interface, and 4-channel input multiplexer. However, the ADS7844N offers a higher 200 kSPS throughput versus 200 kSPS-class operation and a wider supply range, while the ADS7841EG4 provides a single-supply 5 V design in a smaller SOIC-16 package. Designers should validate sampling rate headroom, supply configuration, and package footprint before substituting.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7844N | ADS7841EG4 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Determines how many analog signals can be measured; a direct constraint on system channel count and substitutability. |
| Resolution | 12 bit | 12 bit | Both provide 12-bit resolution, so measurement precision is equivalent between the two parts. |
| Sampling Rate | 200 kSPS | 200 kSPS | Maximum throughput; identical rates mean comparable speed for signal acquisition. |
| Supply Voltage | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Operating supply range must match the system rail; identical ranges allow drop-in power compatibility. |
| Interface Type | SPI / Serial | SPI / Serial | Digital communication protocol must match the host controller; both use serial SPI-compatible interfaces. |
| Package / Mounting | 20-SSOP (Surface Mount) | 16-SSOP (Surface Mount) | Different pin counts and footprints affect PCB layout and whether the parts are physically interchangeable. |
| Input Type | Single-ended / Differential | Single-ended / Differential | Both support single-ended and differential inputs, enabling similar signal conditioning flexibility. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Thermal range must cover the application environment; identical ranges ensure equivalent environmental tolerance. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7844N | ADS7841EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 200k | 200k |
| Number of Inputs | 4, 8 | 4 |
| Input Type | Differential, Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
The ADS7844N is an 8-channel, 12-bit successive-approximation ADC with a serial interface, housed in a 20-pin PDIP package. The ADS7841EG4 is a 4-channel, 12-bit successive-approximation ADC with a serial interface, supplied in a 16-pin SSOP package. The primary differences are channel count (8 vs 4) and package type (PDIP vs SSOP).
No. The ADS7844N uses a 20-pin PDIP package while the ADS7841EG4 uses a 16-pin SSOP package. The pin counts and package footprints differ, so they are not drop-in replacements and require different PCB land patterns.
Both are 12-bit SAR ADCs with single-ended and differential input capability, but the ADS7844N provides 8 input channels while the ADS7841EG4 provides 4 input channels. The channel count difference affects multiplexer configuration and the number of measurable signals.
Both the ADS7844N and ADS7841EG4 are 12-bit successive-approximation register (SAR) analog-to-digital converters with a serial SPI-compatible interface, providing 12-bit resolution for their respective input channels.
Not directly. Because the ADS7841EG4 has only 4 input channels versus 8 on the ADS7844N, and uses a different package (16-pin SSOP vs 20-pin PDIP), a replacement requires PCB redesign, reduced channel count, and validation against the manufacturer datasheet for the target design.
Both devices are specified for single-supply operation in the 2.7 V to 5.25 V range, making them suitable for low-power and mixed 3.3 V/5 V systems. Designers should confirm exact limits in the respective manufacturer datasheets.
The ADS7844N is better suited for higher channel-count applications because it provides 8 analog input channels, whereas the ADS7841EG4 provides only 4 channels. For designs needing more than four inputs, the ADS7844N avoids adding an external multiplexer.