ADS7886SBDBVR
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 3915 PCS
- Package
- SOT-23-6
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS7886SBDBVR và ADS7887SDCKR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7886SBDBVR is a strong functional replacement candidate for the ADS7887SDCKR, sharing identical resolution, SPI interface, and supply voltage range, with only package and shutdown-current differences requiring validation.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7887SDCKR | ADS7886SBDBVR | Why it matters |
|---|---|---|---|
| Resolution | 10 bit | 12 bit | Resolution determines the smallest analog voltage change the ADC can distinguish; a 12-bit part offers 4x finer quantization than a 10-bit part, affecting measurement precision. |
| Sampling Rate | 1.25 MSPS | 1 MSPS | Maximum throughput limits how fast the system can digitize signals; a higher rate supports wider signal bandwidth or faster multiplexed channels. |
| Input Type | Single-ended | Pseudo-differential | Single-ended inputs measure against ground, while pseudo-differential inputs reject common-mode noise on the reference side, improving accuracy in noisy environments. |
| Supply Voltage Range | 2.35 V to 5.25 V | 2.7 V to 5.25 V | The minimum supply voltage affects compatibility with low-voltage rails; the wider low-end range of one part allows operation from lower system supplies. |
| Interface | SPI (up to 20 MHz) | SPI (up to 20 MHz) | Both use a serial SPI-compatible interface, so the digital host connection is functionally interchangeable between the two parts. |
| Package | SOT-23-6 (SC-70) | SOT-23-6 | Package footprint and pinout determine PCB layout compatibility; matching packages allow drop-in substitution without board redesign. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature range defines the environments in which the part can reliably operate; identical ranges mean equivalent thermal robustness. |
| Reference Input | External reference (VDD-referenced) | External reference (VDD-referenced) | The reference architecture sets the full-scale input range and accuracy; both being supply-referenced means similar scaling behavior in the system. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7886SBDBVR | ADS7887SDCKR |
|---|---|---|
| Series | microPOWER™ | microPOWER™ |
| Part Status | Active | Active |
| Number of Bits | 12 | 10 |
| Sampling Rate(Per Second) | 1M | 1.25M |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | Supply | Supply |
| Voltage - Supply, Analog | 2.35V ~ 5.25V | 2.35V ~ 5.25V |
| Voltage - Supply, Digital | 2.35V ~ 5.25V | 2.35V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The ADS7887SDCKR is a 10-bit, 1-MSPS SAR ADC in a 6-pin SC70 (DCK) package, while the ADS7886SBDBVR is a 12-bit, 1-MSPS SAR ADC in a 6-pin SOT-23 (DBV) package. Both are single-channel, micro-power ADCs from Texas Instruments with a pseudo-differential input, SPI-compatible serial interface, and 2.35 V to 5.25 V supply range, but they differ in resolution and package type.
No. The ADS7887SDCKR uses the 6-pin SC70 (DCK) package, and the ADS7886SBDBVR uses the 6-pin SOT-23 (DBV) package. Although both are 6-pin devices with similar pin functions (VDD, GND, CS, SCLK, SDO, and analog input), the package footprints and PCB land patterns differ, so they are not drop-in replacements without a board layout change.
Yes. Both the ADS7887SDCKR and ADS7886SBDBVR are specified for a maximum throughput of 1 MSPS and operate from a single supply of 2.35 V to 5.25 V, per the Texas Instruments datasheets. Both also feature a pseudo-differential analog input and an SPI-compatible serial interface.
The ADS7887SDCKR provides 10-bit resolution, while the ADS7886SBDBVR provides 12-bit resolution. This means the ADS7886SBDBVR offers finer quantization (4096 codes versus 1024 codes over the full-scale input range), which can be advantageous in applications requiring higher measurement precision.
Not as a direct drop-in replacement. Although both share the same 1-MSPS throughput, supply range, and serial interface, the ADS7886SBDBVR has 12-bit resolution versus 10-bit for the ADS7887SDCKR, and it uses a different package (SOT-23 DBV versus SC70 DCK). Substitution requires verifying firmware timing, output data word length, and PCB footprint compatibility against the respective Texas Instruments datasheets.
Both the ADS7887SDCKR and ADS7886SBDBVR are micro-power SAR ADCs designed for low-power operation. According to Texas Instruments datasheets, both devices draw very low supply current at 1 MSPS and support a power-down mode between conversions to further reduce average power consumption. Refer to the respective datasheets for exact current and power figures at specific supply voltages and throughput rates.
Both devices use an SPI-compatible serial interface with chip select (CS), serial clock (SCLK), and serial data output (SDO) pins. This allows direct connection to most microcontrollers, DSPs, and FPGAs without external glue logic, and both support daisy-chain or multi-device configurations on a shared bus.