ADS8345E/2K5
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 3595 PCS
- Package
- SSOP-20
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS8345E/2K5 và ADS831E/2K5G4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS8345E/2K5 and ADS831E/2K5G4 are not drop-in replacements for one another. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial interface, while the ADS831E/2K5G4 is an 8-bit, 1-channel pipeline ADC with a parallel interface. They differ in resolution, channel count, output interface, and package, so a direct substitution is not feasible without a full system redesign.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS831E/2K5G4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 8 | Resolution determines the smallest measurable signal step; a 16-bit ADC offers far finer quantization than an 8-bit ADC, so these parts are not functionally interchangeable in precision applications. |
| Number of Input Channels | 8 (single-ended) / 4 (differential) | 1 (single-ended) | Channel count defines how many signals can be digitized; the multi-channel ADS8345 can multiplex several inputs while the single-channel ADS831 cannot, affecting system architecture. |
| Sampling Rate (max) | 100 kSPS | 20 MSPS | Maximum sample rate sets the bandwidth of signals that can be captured; the ADS831 is far faster, making it suitable for high-speed acquisition where the ADS8345 would be too slow. |
| Input Type | Single-ended / Pseudo-differential | Single-ended | Differential input capability improves noise immunity and common-mode rejection; the ADS8345 supports differential configurations while the ADS831 does not. |
| Interface | SPI / Serial | Parallel | The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution. |
| Supply Voltage | 2.7 V to 5.25 V | 5 V (single supply) | Supply range determines compatibility with the system power rail; the wider-range ADS8345 can operate at lower voltages that the 5 V ADS831 cannot support. |
| Package | 20-pin SSOP | 20-pin SSOP | Package footprint affects PCB layout and assembly; matching packages ease board-level replacement even when electrical characteristics differ. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range must cover the application environment; identical industrial ranges mean both parts suit the same thermal conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS831E/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 8 |
| Sampling Rate(Per Second) | 100k | 80M |
| Number of Inputs | 4, 8 | 1 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | Pipelined |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, operating from a 2.7 V to 5 V supply, offered in a 20-pin SSOP package and supplied on a 2,500-unit reel. The ADS831E/2K5G4 is an 8-bit, 1 MSPS sampling ADC with a parallel interface, operating from a 5 V supply, offered in a 20-pin SSOP package and supplied on a 2,500-unit reel. They differ in resolution, channel count, interface type, and supply requirements.
No. Although both devices are offered in a 20-pin SSOP package, their pin functions differ because the ADS8345E provides a serial interface with 8 input channels, while the ADS831E provides a parallel interface with a single sampling input. Pin assignments and signal functions are not interchangeable, so the PCB layout must be designed specifically for each device.
No. The ADS831E/2K5G4 is an 8-bit device with a parallel interface and a 5 V supply, whereas the ADS8345E/2K5 is a 16-bit device with a serial interface and a 2.7 V to 5 V supply range. Resolution, interface, channel count, and supply requirements differ, so a direct replacement is not possible without redesigning the interface and validating system performance.
The ADS8345E/2K5 provides 16-bit resolution with 8 input channels and a successive-approximation architecture. The ADS831E/2K5G4 provides 8-bit resolution with a 1 MSPS sampling rate and a single sampling input. These differences make the ADS8345E/2K5 suitable for higher-resolution multi-channel applications, while the ADS831E/2K5G4 targets higher-speed, lower-resolution sampling.
The ADS8345E/2K5 operates from a 2.7 V to 5 V supply and uses a serial interface. The ADS831E/2K5G4 operates from a 5 V supply and uses a parallel interface. Designs must account for these supply and interface differences when selecting or replacing either device.
Both devices are offered in a 20-pin SSOP package. The ADS8345E/2K5 and ADS831E/2K5G4 suffixes indicate 2,500-unit tape-and-reel packaging. The G4 suffix on the ADS831E/2K5G4 denotes a green (RoHS-compliant) package option per Texas Instruments ordering conventions. Designers should confirm the exact package and ordering code against the respective manufacturer datasheet before production release.
The ADS8345E/2K5 is better suited for multi-channel, high-resolution data acquisition because it provides 16-bit resolution and 8 input channels with a serial interface. The ADS831E/2K5G4, with 8-bit resolution and a single sampling input, is intended for higher-speed, lower-resolution applications.
The ADS831E/2K5G4 is better suited for high-speed sampling because it provides a 1 MSPS sampling rate with a parallel interface. The ADS8345E/2K5, with its 16-bit successive-approximation architecture and serial interface, is oriented toward higher-resolution, multi-channel measurements rather than high-speed sampling.