ADS8556IPM
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 6944 PCS
- Package
- LQFP-64
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS8556IPM và ADS8555SPM cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS8556IPM and ADS8555SPM are functionally comparable 16-bit, 6-channel simultaneous-sampling SAR ADCs from the same family, sharing a common TQFP-64 footprint and similar digital interface. The ADS8556IPM offers a wider analog supply range and higher per-channel throughput, while the ADS8555SPM provides a higher aggregate sampling rate. Both are viable substitutes in most designs, but the supply-voltage headroom and timing budget should be validated against the target application before substitution.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8556IPM | ADS8555SPM | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit SAR ADCs, so nominal resolution is identical and not a differentiator for substitutability. |
| Number of Input Channels | 6 single-ended / 3 differential | 6 single-ended / 3 differential | Channel count and configuration must match the system's analog front end for a drop-in replacement. |
| Sampling Rate (max) | 630 kSPS | 630 kSPS | Maximum throughput determines whether the device meets the timing budget of the application. |
| Supply Voltage (Analog) | 5 V (4.5 V to 5.5 V) | 5 V (4.5 V to 5.5 V) | Analog supply range must be compatible with the board's power rail to avoid level shifting or damage. |
| Digital Interface Supply | 2.7 V to 5.5 V | 2.7 V to 5.5 V | The I/O supply must match the host logic level (e.g., 3.3 V or 5 V) for reliable communication. |
| Interface Type | Parallel / Serial (SPI) | Parallel / Serial (SPI) | The available digital interface must match the host controller's supported bus to allow direct connection. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature grade must cover the application's environmental conditions for guaranteed performance. |
| Package | 64-LQFP (PM) | 64-LQFP (PM) | Package and pinout must be identical for a physical drop-in replacement on the PCB. |
| INL (max) | ±1.5 LSB | ±1.5 LSB | Integral nonlinearity affects absolute accuracy; matching values ensures equivalent measurement fidelity. |
| Power Consumption (typ) | ~250 mW | ~250 mW | Power draw impacts thermal design and supply sizing; equivalent consumption supports direct substitution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8556IPM | ADS8555SPM |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 630k | 630k |
| Number of Inputs | 6 | 6 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, Parallel | SPI, Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The ADS8556IPM is a 16-bit, 6-channel simultaneous-sampling SAR ADC, while the ADS8555SPM is a 16-bit, 6-channel simultaneous-sampling SAR ADC with an integrated programmable gain amplifier (PGA) front end. Both are pin-compatible in the same 64-pin LQFP package, but the ADS8555SPM adds per-channel PGA functionality that the ADS8556IPM does not provide.
Yes. Both devices are offered in a 64-pin LQFP (PM) package with the same pinout, which allows board-level compatibility. Designers should still verify the pin functions against the respective datasheets, since the ADS8555SPM uses some pins for PGA-related configuration.
Both the ADS8556IPM and ADS8555SPM support a maximum throughput of 630 kSPS per channel in parallel interface mode. The actual achievable rate depends on the selected interface mode and configuration.
The ADS8556IPM supports bipolar input ranges of ±10 V, ±5 V, and ±2.5 V (with a 5 V reference). The ADS8555SPM, with its integrated PGA, supports additional programmable gain settings, allowing smaller input signals to be amplified to utilize the full ADC range. Exact ranges should be confirmed in the respective datasheets.
Both devices support parallel and serial interfaces. The parallel interface provides 16-bit word access, while the serial interface supports SPI-compatible communication. Interface selection is configured via dedicated control pins.
Both devices operate from a 5 V analog supply (AVDD) and a separate digital supply (DVDD) that supports 2.7 V to 5.25 V, allowing direct interfacing to lower-voltage logic. Designers should confirm exact supply tolerances in the manufacturer datasheets.
Because both share the same 64-pin LQFP package and pinout, the ADS8555SPM can be placed on a board designed for the ADS8556IPM. However, the added PGA functionality requires appropriate configuration and may affect input signal conditioning, so the design must be validated against the ADS8555SPM datasheet before substitution.