ADS8555SPMR vs ADS8568SPM

Bảng so sánh chi tiết giữa ADS8555SPMR và ADS8568SPM cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8568SPM and ADS8555SPMR are both 16-bit simultaneous-sampling SAR ADCs from Texas Instruments with matching resolution, supply architecture, and serial interface, making the ADS8555SPMR a viable functional replacement candidate for the ADS8568SPM. Designers should validate the reduced channel count, lower per-channel throughput, and package footprint differences against the target application before committing to the substitution.

Resolution High match
Channel Count Validation required
Sample Rate Validation required
Package Type Validation required

Parts at a glance

Part A

ADS8555SPMR

Texas Dụng cụ

Lifecycle
Active
Stock
2733 PCS
Package
LQFP-64
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS8568SPM

Texas Dụng cụ

Lifecycle
Active
Stock
3952 PCS
Package
LQFP-64
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8568SPM ADS8555SPMR Why it matters
Resolution 16 bit 16 bit Both are 16-bit SAR ADCs, so nominal resolution is identical and does not differentiate them.
Number of ADC channels 8 (single-ended) / 4 (differential) 6 (single-ended) / 3 (differential) Channel count determines how many analog signals can be sampled; the ADS8568 offers two more single-ended inputs than the ADS8555.
Maximum sampling rate 510 kSPS 630 kSPS Higher throughput allows faster signal acquisition; the ADS8555 samples faster per channel than the ADS8568.
Input configuration Single-ended or differential (software selectable) Single-ended or differential (software selectable) Flexible input modes let the same device serve both bipolar differential and unipolar single-ended sensors.
Analog supply voltage (AVDD) 5 V 5 V The analog supply sets the input range and must match the system rail; both parts use a 5 V analog supply.
Digital supply voltage (DVDD) 2.7 V to 5.5 V 2.7 V to 5.5 V A wide DVDD range allows direct interfacing to 3.3 V or 5 V logic without level shifters.
Interface Parallel and serial (SPI-compatible) Parallel and serial (SPI-compatible) Both parallel and serial interfaces give flexibility in connecting to FPGAs, DSPs, or microcontrollers.
Package 64-pin LQFP 64-pin LQFP Identical package and pin count simplify PCB layout reuse between the two parts.
Operating temperature range -40 °C to +125 °C -40 °C to +125 °C Industrial temperature range ensures reliable operation in harsh environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8555SPMR ADS8568SPM
Part Status Active Active
Number of Bits 16 16
Sampling Rate(Per Second) 630k 500k
Number of Inputs 6 8
Input Type Single Ended Single Ended
Data Interface SPI, Parallel SPI, Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 5.5V
Features Simultaneous Sampling Simultaneous Sampling
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What are the key architectural differences between the ADS8568SPM and ADS8555SPMR?

The ADS8568SPM is an 8-channel, 16-bit successive-approximation register (SAR) analog-to-digital converter (ADC) with a maximum throughput of 510 kSPS per channel in hardware mode. The ADS8555SPMR is a 6-channel, 16-bit SAR ADC with a maximum throughput of 630 kSPS per channel. Both devices integrate a bipolar input range, an internal reference, and a parallel/serial interface, but they differ in channel count and maximum sampling rate.

Are the ADS8568SPM and ADS8555SPMR pin-to-pin compatible?

No. The ADS8568SPM is offered in a 64-pin LQFP package, while the ADS8555SPMR is offered in a 64-pin LQFP package as well, but the pin functions and channel assignments differ due to the different channel counts (8 vs. 6). A direct PCB drop-in replacement is not possible without verifying pinout and layout against the respective manufacturer datasheets.

Can the ADS8555SPMR be used as a direct substitute for the ADS8568SPM in an existing design?

No, a direct substitution is not recommended. The ADS8568SPM provides 8 analog input channels, whereas the ADS8555SPMR provides only 6. Additionally, the maximum throughput differs (510 kSPS vs. 630 kSPS per channel), and the pinout is not identical. Any substitution requires validation of channel count, timing, and PCB layout against the target design requirements.

What are the input voltage ranges supported by both ADCs?

Both the ADS8568SPM and ADS8555SPMR support bipolar analog input ranges of ±10 V, ±5 V, and ±2.5 V, as well as a 0 V to 5 V unipolar range, configured via hardware or software settings. These ranges are specified in the respective manufacturer datasheets and are identical across both devices.

Do both devices support both parallel and serial interfaces?

Yes. Both the ADS8568SPM and ADS8555SPMR support a parallel interface (16-bit word) and a serial interface (SPI-compatible) for communication with a host controller. The interface mode is selectable via dedicated configuration pins, as documented in the manufacturer datasheets.

How do the power supply requirements compare between the ADS8568SPM and ADS8555SPMR?

Both devices require an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 2.7 V to 5.5 V. They also require a separate supply for the internal reference and input buffer circuitry. The datasheets specify identical nominal supply voltage ranges for both parts, though actual power consumption may differ slightly due to the different channel counts and sampling rates.

What is the operating temperature range for both ADCs?

Both the ADS8568SPM and ADS8555SPMR are specified for operation over the industrial temperature range of –40°C to +125°C, as stated in their respective manufacturer datasheets. This makes both devices suitable for industrial and automotive applications requiring extended temperature performance.

Which device offers higher per-channel throughput?

The ADS8555SPMR offers a higher maximum per-channel throughput of 630 kSPS compared to 510 kSPS for the ADS8568SPM. However, the ADS8568SPM provides two additional analog input channels (8 vs. 6), so the total aggregate throughput is 4.08 MSPS for the ADS8568SPM versus 3.78 MSPS for the ADS8555SPMR.