AM26C31IDR vs AM26C31CDRG4

Bảng so sánh chi tiết giữa AM26C31IDR và AM26C31CDRG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31IDR and AM26C31CDRG4 are functionally equivalent quad differential line drivers from the same AM26C31 family, sharing identical logic function, channel count, package footprint, and supply voltage range. The primary distinction lies in operating temperature grade and qualification status, so the AM26C31CDRG4 can serve as a functional substitute for the AM26C31IDR where the extended temperature range and qualification level are acceptable, but designers should confirm thermal margin and qualification requirements before committing to the swap.

Logic Function and Channel Count High match
Package Type and Pinout High match
Supply Voltage Range High match
Operating Temperature Grade Validation required

Parts at a glance

Part A

AM26C31IDR

Texas Dụng cụ

Lifecycle
Active
Stock
2239 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26C31CDRG4

Texas Dụng cụ

Lifecycle
Active
Stock
7066 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31IDR AM26C31CDRG4 Why it matters
Function Quadruple differential line driver Quadruple differential line driver Both devices perform the same core function, so they are functionally interchangeable in most designs.
Number of Drivers 4 4 The driver count must match the number of differential channels required by the interface.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V The operating supply range determines compatibility with the system power rail.
Output Type Differential (3-state) Differential (3-state) Three-state differential outputs allow bus sharing and are essential for multipoint RS-422/RS-485 style links.
Data Rate Up to 10 Mbps Up to 10 Mbps The maximum signaling rate must meet the bandwidth needs of the communication interface.
Package / Mounting 16-SOIC, surface mount 16-SOIC, surface mount Package and mounting style must match the PCB footprint and assembly process.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the application's environmental conditions.
RoHS Compliance RoHS compliant RoHS compliant (G4 suffix) RoHS status affects regulatory compliance and is indicated by the G4 suffix on the second part.
Packaging / Reel Tape and reel (large reel) Tape and reel (G4 green reel) Reel packaging affects automated assembly handling and order quantities.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31IDR AM26C31CDRG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AM26C31IDR and AM26C31CDRG4?

Both are quadruple differential line drivers from Texas Instruments that meet the requirements of TIA/EIA-422-B and ITU Recommendation V.11. They are designed for balanced transmission of digital data over twisted-pair or parallel-wire cables and are functionally identical quad differential line drivers.

What is the difference between the AM26C31IDR and AM26C31CDRG4?

The primary difference is the operating temperature range and the corresponding orderable part number suffix. The AM26C31IDR is specified for the industrial temperature range of -40°C to 85°C, while the AM26C31CDRG4 is specified for the commercial temperature range of 0°C to 70°C. Both are supplied in the same 16-pin SOIC package and are functionally equivalent line drivers.

Are the AM26C31IDR and AM26C31CDRG4 pin-compatible?

Yes. Both devices are offered in the same 16-pin SOIC (D) package with identical pin assignments, so they are pin-compatible and share the same PCB land pattern.

Can the AM26C31IDR and AM26C31CDRG4 be used interchangeably in a design?

They are functionally and pin-compatible, but interchangeability depends on the application's ambient temperature. The AM26C31IDR covers -40°C to 85°C, whereas the AM26C31CDRG4 covers only 0°C to 70°C. The industrial-grade AM26C31IDR can generally replace the commercial-grade part in temperature-controlled environments, but the reverse substitution is not valid for applications that operate outside 0°C to 70°C.

What are the key electrical specifications common to both devices?

Both devices operate from a single 5 V supply and feature 3-state outputs, a common enable function, and high output impedance in the power-off condition. They provide typical differential output voltage compliant with TIA/EIA-422-B, low supply current, and are characterized for balanced line driving of digital data.

What does the "G4" suffix on the AM26C31CDRG4 indicate?

The "G4" suffix is a Texas Instruments ordering suffix indicating Green (RoHS-compliant, lead-free) packaging. The AM26C31IDR is also available in RoHS-compliant packaging; the G4 designation specifically identifies the green-compliant version of the commercial-temperature part.

Which part should be selected for an industrial-temperature application?

The AM26C31IDR should be selected for applications requiring operation from -40°C to 85°C. The AM26C31CDRG4 is rated only for 0°C to 70°C and is not specified for industrial temperature extremes.