24LC256T-E/MS

The 24LC256T-E/MS is a 256-Kilobit (32K x 8) serial EEPROM from Microchip Technology, utilizing I²C (Inter-Integrated Circuit) communication protocol. It is designed for non-volatile memory storage, meaning it retains data even when power is removed. Key features include a wide operating voltage range from 1.7V to 5.5V, low power consumption, and a maximum clock frequency of 400 kHz in standard mode, which can be extended up to 1 MHz in fast mode. The device supports byte-level and page-level writing, with a page size of 64 bytes, and features hardware write protection to prevent accidental data loss. The 24LC256T-E/MS is housed in an 8-lead MSOP (Mini Small Outline Package) for compact design requirements. It is highly reliable and suitable for applications in consumer electronics, industrial systems, and automotive environments where long-term data retention and multiple write cycles are necessary. The EEPROM's endurance rating is 1 million write/erase cycles, and it can retain data for up to 200 years, ensuring long-term stability and performance.

The 24LC256T-E/MS is a 256-Kbit I2C EEPROM from Microchip. Equivalent products include the AT24C256C from Microchip's Atmel, the CAT24C256 from ON Semiconductor, and the M24C256 from STMicroelectronics. These alternatives offer similar storage capacity and I2C interface compatibility. Always verify pin configurations and electrical characteristics to ensure they meet your specific requirements.

The 24LC256T-E/MS is a 256-Kbit I2C-compatible Serial Electrically Erasable Programmable Read-Only Memory (EEPROM) produced by Microchip Technology. Key features include:
1. Capacity: 256 Kbit organized as 32,768 x 8 bits.
2. Interface: I2C bus, supporting standard (100 kHz), fast (400 kHz), and fast-plus (1 MHz) modes.
3. Voltage Range: Operates in a wide voltage range from 1.7V to 5.5V.
4. Low Power Consumption: Consumes minimal power, with typical read current at 400 µA and standby current at 1 µA.
5. Data Retention: Offers over 200 years of data retention.
6. Endurance: Up to 1 million erase/write cycles per byte.
7. Page Write: Supports a page write of up to 64 bytes.
8. Temperature Range: Functions in industrial temperature ranges from -40°C to +125°C.
9. Package: Available in an 8-pin MSOP package.
10. Write Protection: Includes a write-protect pin to safeguard data integrity.
These features make it suitable for a wide range of applications requiring reliable non-volatile memory storage.

The 24LC256T-E/MS is a 256-Kilobit Electrically Erasable PROM (EEPROM) from Microchip Technology. It has an 8-pin configuration. The pins are typically designated as follows:
1. A0, A1, A2: These are address pins used for device selection, allowing up to eight devices on the same bus by changing the combination of these pins.
2. VSS: Ground pin.
3. SDA (Serial Data): This pin is used for data input/output. It is a bidirectional line for reading and writing data.
4. SCL (Serial Clock): This pin is used to synchronize the transfer of data.
5. WP (Write Protect): This pin is used to enable or disable write operations. When connected to VCC, write operations are inhibited.
6. VCC: Power supply pin.
This EEPROM operates on an I2C interface, which allows for simple two-wire communication between devices. It is commonly used for applications requiring non-volatile data storage without power, such as configuration data, user settings, or system calibration data.

The 24LC256T-E/MS is manufactured by Microchip Technology Inc. Microchip Technology is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. The company specializes in the design and production of embedded control solutions, which are used in a variety of applications across different industries, such as automotive, industrial, consumer electronics, and telecommunications. Their products are essential for developing a wide range of electronics, providing critical components for efficient, cost-effective, and innovative solutions.

The 24LC256T-E/MS is a 256-Kbit (32-Kbyte) I2C Serial EEPROM used in applications requiring non-volatile data storage. Its application areas include:
1. Consumer Electronics: Storing configuration data and settings in devices like TVs and set-top boxes.
2. Industrial Control Systems: Retaining calibration data and parameters.
3. Medical Devices: Keeping patient data or device configuration settings.
4. Automotive: Logging data in ECUs and infotainment systems.
5. Computing: Storing BIOS settings and firmware versions.
6. Telecommunications: Storing network configurations and user data.
7. Smart Cards and Security Devices: Safeguarding encryption keys and authentication data.
It is valued for its low-power consumption, reliability, and ease of interfacing with microcontrollers.

The 24LC256T-E/MS is a 256 Kbit I2C-compatible serial EEPROM from Microchip Technology. It is housed in an 8-lead MSOP (Mini Small Outline Package), which is a compact surface-mount package ideal for space-constrained applications.