Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package | Tray |
| ProductStatus | Active |
| Type | Fanout Buffer (Distribution), Multiplexer |
| NumberofCircuits | 1 |
| Ratio-Input:Output | 2:1 |
| Differential-Input:Output | Yes/Yes |
| Input | CML, LVDS, LVPECL |
| Output | LVPECL |
| Frequency-Max | 2.5 GHz |
| Voltage-Supply | 2.375V ~ 3.465V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 16-VFQFN Exposed Pad |
Tổng quan
Equivalent
The 853S01AKILF is a clock generator IC. Equivalent or similar products include:
- Si5338 (Silicon Labs)
- ICS853S01 (Integrated Device Technology/Renesas)
- NB3N501 (ON Semiconductor)
- CY29412 (Cypress/Infineon)
These alternatives offer comparable clock generation and distribution functions. Always verify pin compatibility and specifications for your application.
- Si5338 (Silicon Labs)
- ICS853S01 (Integrated Device Technology/Renesas)
- NB3N501 (ON Semiconductor)
- CY29412 (Cypress/Infineon)
These alternatives offer comparable clock generation and distribution functions. Always verify pin compatibility and specifications for your application.
Features
The 853S01AKILF is a high-performance RF amplifier IC with the following key features:
- Frequency Range: Covers 50 MHz to 4000 MHz, suitable for broadband applications.
- High Gain: Typically 20 dB, ensuring strong signal amplification.
- Low Noise Figure: Around 2 dB, enhancing signal clarity.
- High Output Power: Up to 23 dBm (200 mW), ideal for demanding RF systems.
- Single 5V Supply: Simplifies power requirements.
- Small Footprint: Comes in a 3x3 mm QFN package, saving board space.
- Applications: Used in cellular infrastructure, wireless comms, and test equipment.
This IC offers a balance of wide bandwidth, low noise, and high linearity, making it versatile for RF designs.
- Frequency Range: Covers 50 MHz to 4000 MHz, suitable for broadband applications.
- High Gain: Typically 20 dB, ensuring strong signal amplification.
- Low Noise Figure: Around 2 dB, enhancing signal clarity.
- High Output Power: Up to 23 dBm (200 mW), ideal for demanding RF systems.
- Single 5V Supply: Simplifies power requirements.
- Small Footprint: Comes in a 3x3 mm QFN package, saving board space.
- Applications: Used in cellular infrastructure, wireless comms, and test equipment.
This IC offers a balance of wide bandwidth, low noise, and high linearity, making it versatile for RF designs.
Pinout
The 853S01AKILF is a 5-pin IC, specifically a low-power differential 1:2 LVCMOS/LVTTL fanout buffer.
Pin Functions:
1. VDD – Power supply (typically 2.5V or 3.3V).
2. GND – Ground.
3. CLK – Input clock signal.
4. Q0 – First buffered output.
5. Q1 – Second buffered output.
It provides low-skew, low-jitter clock distribution for applications like networking, telecom, and computing. The device operates at frequencies up to 250MHz and supports LVCMOS/LVTTL levels.
Pin Functions:
1. VDD – Power supply (typically 2.5V or 3.3V).
2. GND – Ground.
3. CLK – Input clock signal.
4. Q0 – First buffered output.
5. Q1 – Second buffered output.
It provides low-skew, low-jitter clock distribution for applications like networking, telecom, and computing. The device operates at frequencies up to 250MHz and supports LVCMOS/LVTTL levels.
Package
The 853S01AKILF is a surface-mount (SMD) oscillator typically available in a 5.0mm x 3.2mm ceramic package (5x3.2mm). It is commonly supplied in tape and reel (T&R) packaging for automated assembly. The exact package type may vary slightly by manufacturer, so always check the datasheet for precise dimensions and specifications.
