AD524BD

Hình ảnh chỉ để tham khảo

AD524BD

+BOM

IC INST AMP 1 CIRCUIT 16CDIP

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Supplier Analog Devices Inc.
Package Tube
ProductStatus Active
AmplifierType Instrumentation
NumberofCircuits 1
SlewRate 5V/µs
GainBandwidthProduct 1 MHz
-3dbBandwidth 1 MHz
Current-InputBias 25 nA
Voltage-InputOffset 100 µV
Current-Supply 3.5mA
Voltage-SupplySpan(Min) 12 V
Voltage-SupplySpan(Max) 36 V
OperatingTemperature -25°C ~ 85°C
MountingType Through Hole
Package/Case 16-CDIP (0.300, 7.62mm)

Tổng quan

Description

AD524BD is a digital potentiometer from Analog Devices. It provides a programmable resistance between its end terminals A and B with the wiper at W controlled by a digital interface.
Key points:
- 256-step (8-bit) wiper resolution for precise attenuation/gain control.
- I2C-compatible digital interface (addr/pointer controls the wiper).
- End-to-end resistance values vary by variant (e.g., 5k, 10k, 50k, 100k); operates from a suitable supply (commonly 2.7–5.5 V).
- Wiper state is stored in volatile memory, with some variants offering non-volatile memory to retain settings after power-down.
- Features include reset, programmable increment/decrement, and protections; package options vary.
Use cases: gain/attenuation control, sensor calibration, automatic offset/gain adjustments, and DAC replacement tasks. For exact specifications and pinout, consult the ADI AD524BD datasheet.

Equivalent

AD524BD is a digital potentiometer. Equivalents are other vendors’ digipots with the same end-to-end resistance and interface (I2C or SPI). Examples:
- Analog Devices: AD5252/AD5253
- Microchip: MCP41xx/MCP42xx (SPI) and MCP45xx/MCP46xx (I2C)
- Maxim: DS1803/DS1804 (I2C)
Note: ensure matching resistance (5k/10k/50k/100k), number of wipers, and memory type (volatile/nonvolatile).

Features

AD524BD is a dual digital potentiometer. Key features:
- Two potentiometers, end-to-end resistance of 100 kΩ each.
- 8-bit wiper control per pot (256 steps) for fine adjustment.
- SPI-compatible serial interface (CS, SCLK, SI, SO) for control.
- Both volatile wiper registers and nonvolatile memory for long-term retention.
- Power-on reset and defined default wiper positions.
- Wide supply range: typically 2.7 V to 5.5 V.
- Low power consumption.
- Industrial operating temperature range (typical -40°C to +85°C).
- 8-pin package (e.g., SOIC/DIP variants) suitable for compact designs.
- Applications: gain/attenuation trimming, sensor signal conditioning, calibration.
Note: exact package options and electrical specs vary by revision; consult the latest datasheet for precise current limits, tolerances, and pinout.

Pinout

AD524BD is an 8‑pin device (DIP‑8/SOIC‑8). It is a single‑channel digital potentiometer with an SPI‑compatible serial interface. Pins:
- A, B: potentiometer end terminals
- W: wiper
- CS (chip select), SCK (serial clock), SI/SDI (serial data input)
- VDD: supply
- VSS: ground
(Other package variants exist, but pin functions are as above.)

Manufacturer

The AD524BD is manufactured by Analog Devices, Inc. (ADI).
Analog Devices is a multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing (DSP) integrated circuits for various industries.

Application

AD524BD is a digitally controlled potentiometer. Typical application areas include:
- Programmable gain/attenuation in op-amps and ADC/DAC front-ends
- Adjustable feedback networks, reference scaling, and offset calibration
- Programmable voltage dividers and level-setting networks
- Sensor signal conditioning and automatic calibration/compensation in instrumentation
- Replacement for mechanical potentiometers in consumer and automotive electronics (volume, control, user interfaces)
- Programmable attenuators for audio, instrumentation, and RF front-ends
- Test/bench equipment for automated calibration and tuning of analog circuits

Package

AD524BD uses an 8-pin package: Plastic DIP (DIP-8). Surface-mount SOIC-8 variants are also available.

Sản phẩm liên quan đến AD524BD

So sánh khác

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho AD524BD sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.