Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | Analog Devices Inc. |
| Package / Case | Tray |
| Part Status | Active |
| RF Type | General Purpose |
| Topology | Absorptive |
| Circuit | 2 x SPDT |
| Frequency Range | 0Hz ~ 2GHz |
| Isolation | 36dB |
| Insertion Loss | 0.9dB |
| Test Frequency | 1GHz |
| P1d B | 16dBm |
| IIP3 | 32dBm |
| Impedance | 50Ohm |
| Voltage - Supply | 1.65V ~ 2.75V |
| Operating Temperature | -40°C ~ 85°C |
Tổng quan
Description
ADG936BCPZ is Analog Devices’ digitally controlled analog switch/multiplexer. It provides multiple bidirectional analog paths that you configure with a digital control word, enabling flexible signal routing in instrumentation, data acquisition, test equipment, and communications.
Key points:
- Digitally controlled routing: connect or disconnect analog signals under simple digital logic.
- Multi-channel/bidirectional: suitable for compact signal-path multiplexing.
- Typical analog performance: low on-resistance, high off-isolation, fast switching, and rail-to-rail I/O on a single supply.
- Packaging: CPZ denotes a 16-lead LFCSP-style package (RoHS-compliant).
- Interface: straightforward digital control lines (address/enable) to select the active path.
For exact channel count, voltage ranges, leakage, and switching specs, refer to the ADG936 datasheet. This helps ensure the device fits your signaling, speed, and power requirements.
Key points:
- Digitally controlled routing: connect or disconnect analog signals under simple digital logic.
- Multi-channel/bidirectional: suitable for compact signal-path multiplexing.
- Typical analog performance: low on-resistance, high off-isolation, fast switching, and rail-to-rail I/O on a single supply.
- Packaging: CPZ denotes a 16-lead LFCSP-style package (RoHS-compliant).
- Interface: straightforward digital control lines (address/enable) to select the active path.
For exact channel count, voltage ranges, leakage, and switching specs, refer to the ADG936 datasheet. This helps ensure the device fits your signaling, speed, and power requirements.
Equivalent
I can help with exact equivalents, but I need key specs. Please confirm:
- the device function (e.g., analog switch/mux, SPDT/SPDT, number of channels)
- bandwidth or frequency range
- on-resistance (Ron), supply voltage (Vdd), control logic
- package/footprint and whether you want Analog Devices-only or any vendor
Share these, and I’ll provide 3–5 direct cross-references.
- the device function (e.g., analog switch/mux, SPDT/SPDT, number of channels)
- bandwidth or frequency range
- on-resistance (Ron), supply voltage (Vdd), control logic
- package/footprint and whether you want Analog Devices-only or any vendor
Share these, and I’ll provide 3–5 direct cross-references.
Features
Here are the typical features of the ADG936BCPZ (Analog Devices):
- 4:1 analog multiplexer/demultiplexer configuration (two select inputs)
- Break-before-make switching to prevent channel overlap
- Low on-resistance (Ron) with flatness over the input range
- Low leakage in the OFF state and good off-channel isolation
- Wide analog signal range and support for single-supply operation
- Low charge injection for clean switching
- Fast switching performance for rapid channel changes
- Suitable for precision switching with good linearity and low distortion
- RoHS-compliant, compact package (CPZ) suitable for surface-mount applications
- Broad operating temperature range (typical ADI specs)
Note: for exact electrical figures (Ron, leakage, isolation, bandwidth, and precise temperature range), please refer to the official datasheet.
- 4:1 analog multiplexer/demultiplexer configuration (two select inputs)
- Break-before-make switching to prevent channel overlap
- Low on-resistance (Ron) with flatness over the input range
- Low leakage in the OFF state and good off-channel isolation
- Wide analog signal range and support for single-supply operation
- Low charge injection for clean switching
- Fast switching performance for rapid channel changes
- Suitable for precision switching with good linearity and low distortion
- RoHS-compliant, compact package (CPZ) suitable for surface-mount applications
- Broad operating temperature range (typical ADI specs)
Note: for exact electrical figures (Ron, leakage, isolation, bandwidth, and precise temperature range), please refer to the official datasheet.
Pinout
Pin count: 8 pins (LFCSP-8). Function: Dual 2:1 (SPDT) analog switch/multiplexer — two independent 2:1 signal paths with shared or individual select control inputs.
Manufacturer
- Manufacturer: Analog Devices, Inc. (ADI).
- About the company: A global semiconductor company that designs and manufactures analog, mixed‑signal, and DSP integrated circuits (e.g., data converters, amplifiers, sensors, RF) for industrial, automotive, communications, and consumer markets.
- About the company: A global semiconductor company that designs and manufactures analog, mixed‑signal, and DSP integrated circuits (e.g., data converters, amplifiers, sensors, RF) for industrial, automotive, communications, and consumer markets.
Application
ADG936BCPZ is a high-performance analog switch/multiplexer from Analog Devices. Typical application areas:
- RF/microwave switch matrices for receivers/transceivers
- Front-end signal routing in wireless telecom, radar, and test equipment
- Instrumentation and data-acquisition signal paths
- Channelized architectures for software-defined radios
- Any system requiring low leakage and high isolation analog switching
Concise and suitable for signal-path routing in mixed-signal designs.
- RF/microwave switch matrices for receivers/transceivers
- Front-end signal routing in wireless telecom, radar, and test equipment
- Instrumentation and data-acquisition signal paths
- Channelized architectures for software-defined radios
- Any system requiring low leakage and high isolation analog switching
Concise and suitable for signal-path routing in mixed-signal designs.
Package
The ADG936BCPZ uses a 16‑lead LFCSP (Lead Frame Chip Scale Package), RoHS compliant.
