ADM101EARM

Hình ảnh chỉ để tham khảo

ADM101EARM

+BOM

IC TRANSCEIVER FULL 1/1 10MSOP

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Supplier Analog Devices Inc.,Rochester Electronics, LLC
Package Tube,Tube
ProductStatus Obsolete
Type Transceiver
Protocol RS232
NumberofDrivers/Receivers 1/1
Duplex Full
ReceiverHysteresis 200 mV
DataRate 460Kbps
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Tổng quan

Description

ADM101EARM is an Analog Devices part number (from the ADM101 family). It is a digital temperature sensor/monitor used to measure a board’s temperature and report a digital value via a sensor interface (typically I2C or SPI-like).
Key points
- On‑chip temperature sensor with Celsius output
- Programmable or fixed readouts and optional alert/interrupt outputs
- Low power, compact packaging suitable for board-level monitoring
- Common in servers, telecom, automotive ECUs, and industrial controls
Getting started
- Obtain the exact ADM101EARM datasheet to confirm package, supply, and interface details
- Note Vcc range, I/O interface, and I2C address/register map
- Connect Vcc, GND, SDA, SCL (or equivalent)
- Read the temperature register to obtain °C
- Configure thresholds/alerts if needed; use provided driver or example code
If you can share the datasheet or a link, I can tailor the summary to the precise variant.

Equivalent

Equivalent products (functional equivalents) for ADM101EARM, a microprocessor reset/voltage supervisor device, include:
- TI TLV803/TLV803-Q1
- Maxim MAX809/MAX810
- Microchip MCP1315/MCP1316
- ON Semiconductor NCP301/NCP302
Note: exact match depends on Vcc range, reset threshold, watchdog option, and package—verify datasheets.

Features

Here are the typical features of the ADM101EARM (Analog Devices) digital temperature sensor:
- Digital, I2C/SMBus-compatible two-wire interface
- Supply voltage: 2.7 V to 5.5 V
- Temperature range: -40°C to +125°C (extended variants may cover -55°C)
- Resolution: 9-bit data with 0.5°C LSB
- Accuracy: typical ~0.5°C at 25°C; max ~1°C over full range
- Programmable high/low temperature limits with a latched alert/interrupt output
- Configurable conversion modes and data rate (one-shot or continuous)
- Address selectable on the bus (multiple devices per bus)
- 8-pin packaging (ARM suffix → MSOP/SOIC-8 variants)
- Applications: board/system thermal monitoring, cooling/control, safety alerting
Note: exact specs (range, accuracy, current, and packaging) can vary by variant; consult the ADM101EARM datasheet for precise details.

Pinout

ADM101EARM is an 8-pin device (SOIC-8/MSOP-8). It is a digital temperature sensor/monitor with an I2C interface and an alert/interrupt output.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI)
- What kind of company: A multinational semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing integrated circuits used in automotive, industrial, communications, consumer electronics, and more.

Application

ADM101EARM is a system supervisor IC used to keep digital systems in a known state. Typical application areas include:
- Microprocessor/MCU reset generation on undervoltage and during power-up
- Monitoring of supply rails for fault conditions and alert signaling
- Power-on reset sequencing in embedded controllers
- System health/diagnostic signaling in telecom, networking, and industrial equipment
- Automotive and consumer electronics requiring reliable reset and monitoring
- Battery-powered/mobile devices where long battery life is important

Package

ADM101EARM uses an 8‑pin MSOP (Mini Small Outline Package).

Sản phẩm liên quan đến ADM101EARM

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho ADM101EARM sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.