Hình ảnh chỉ để tham khảo
GD25B16ETIGR
+BOMIC FLASH 16MBIT SPI/QUAD 8SOP
-
Nhà sản xuấtGigaDevice Semiconductor (HK) Limited
-
Ông. Phần #GD25B16ETIGR
-
Có sẵn21807
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Series | GD25B |
| Part Status | Active |
| Base Product Number | GD25B16 |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 16Mbit |
| Memory Organization | 2M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word, Page | 70µs, 2ms |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOP |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
| Access Time | 7 ns |
Tổng quan
Description
GD25B16ETIGR is GigaDevice’s 16-Mbit serial flash memory in the GD25B16 family. It uses a standard 8-pin SPI (single‑bit) interface for storing firmware and data. The device operates at 2.7–3.6 V and is offered in an industrial temperature range with RoHS-compliant packaging (suffix ETI/GR). Key features include Read and Fast Read, Page Program (256-byte pages), Sector/Block/Chip Erase, Write Enable/Disable, and Read/Write Status Register, along with write protection via status/block-protection bits and HOLD/WP pins. Common uses are boot code storage, embedded firmware, and data logging in microcontroller systems. For exact timings, voltage, packaging, and command details, consult the GD25B16ETIGR datasheet.
Equivalent
GD25B16ETIGR is a 16Mbit SPI serial flash. Common equivalents include:
- Winbond W25Q16BV/JV
- Macronix MX25L1616E
- Spansion S25FL016K
- ISSI FM25L16B
- Microchip SST25VF016B
Note: verify voltage, timing, and package compatibility for your design.
- Winbond W25Q16BV/JV
- Macronix MX25L1616E
- Spansion S25FL016K
- ISSI FM25L16B
- Microchip SST25VF016B
Note: verify voltage, timing, and package compatibility for your design.
Features
Here are the key features of GD25B16ETIGR (16 Mbit serial flash):
- Capacity: 16 Mbit (2 MB) serial flash memory
- Interface: SPI-compatible serial interface (CS, CLK, IOs; WP/HOLD pins)
- Voltage: 2.7–3.6 V supply
- Temperature: Industrial range (-40°C to +85°C)
- Memory organization: 4 KB sectors; 64 KB blocks; entire-chip erase
- Programming: 256-byte page program
- Erase/Protect: Write Enable/Disable; block protection (BP) bits; WP# pin
- Read modes: Standard and fast read support
- Power management: Deep power-down mode; quick wake-up
- Reliability: Data retention about 20 years; erase/write endurance per sector (typical values in datasheet)
- Packaging: RoHS-compliant (GR suffix), 8-pin package
Notes: Exact timing (read speed, page/sector erase times) and endurance figures are specified in the datasheet for this variant.
- Capacity: 16 Mbit (2 MB) serial flash memory
- Interface: SPI-compatible serial interface (CS, CLK, IOs; WP/HOLD pins)
- Voltage: 2.7–3.6 V supply
- Temperature: Industrial range (-40°C to +85°C)
- Memory organization: 4 KB sectors; 64 KB blocks; entire-chip erase
- Programming: 256-byte page program
- Erase/Protect: Write Enable/Disable; block protection (BP) bits; WP# pin
- Read modes: Standard and fast read support
- Power management: Deep power-down mode; quick wake-up
- Reliability: Data retention about 20 years; erase/write endurance per sector (typical values in datasheet)
- Packaging: RoHS-compliant (GR suffix), 8-pin package
Notes: Exact timing (read speed, page/sector erase times) and endurance figures are specified in the datasheet for this variant.
Pinout
- Pin count: 8 pins (8-pin package).
- Function: 16 Mbit serial SPI flash memory (GD25B16). Provides standard SPI interface (CS, SCK, DI, DO) plus WP and HOLD, for storing/storing and erasing firmware/data (read, fast read, page/program, sector/block/chip erase, status register).
- Function: 16 Mbit serial SPI flash memory (GD25B16). Provides standard SPI interface (CS, SCK, DI, DO) plus WP and HOLD, for storing/storing and erasing firmware/data (read, fast read, page/program, sector/block/chip erase, status register).
Manufacturer
- Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice)
- What kind of company: A fabless semiconductor company based in China that designs and markets flash memory and microcontroller solutions (e.g., SPI NOR/NAND flash).
- What kind of company: A fabless semiconductor company based in China that designs and markets flash memory and microcontroller solutions (e.g., SPI NOR/NAND flash).
Application
GD25B16ETIGR is a 16Mb SPI serial Flash memory. Common application areas include:
- Firmware storage for microcontrollers (code and bootloader)
- Code shadowing and firmware upgrade/OTA support
- Data logging and parameter storage (calibration data, LUTs) in IoT/embedded devices
- External non-volatile storage for consumer electronics (set-top boxes, cameras, printers, wearables)
- Support memory for routers, modems, DSP/MCU systems
- Automotive/industrial control modules requiring reliable non-volatile storage
Note: suitable for any system needing compact, high-volume non-volatile program/data memory connected via SPI.
- Firmware storage for microcontrollers (code and bootloader)
- Code shadowing and firmware upgrade/OTA support
- Data logging and parameter storage (calibration data, LUTs) in IoT/embedded devices
- External non-volatile storage for consumer electronics (set-top boxes, cameras, printers, wearables)
- Support memory for routers, modems, DSP/MCU systems
- Automotive/industrial control modules requiring reliable non-volatile storage
Note: suitable for any system needing compact, high-volume non-volatile program/data memory connected via SPI.
Package
GD25B16ETIGR comes in an 8‑pin SOP (SOIC‑8) package. The trailing “R” indicates Tape & Reel packaging.
