GD25Q64ESJGR

Hình ảnh chỉ để tham khảo

GD25Q64ESJGR

+BOM

IC FLASH 64MBIT SPI/QUAD 8SOP

  • Nhà sản xuấtGigaDevice Semiconductor (HK) Limited

  • Ông. Phần #GD25Q64ESJGR

  • Có sẵn13577

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Series GD25Q
Part Status Active
Base Product Number GD25Q64
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O
Clock Frequency 133 MHz
Write Cycle Time - Word, Page 140µs, 4ms
Voltage - Supply 2.7V ~ 3.6V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOP
Packaging Tape & Reel (TR)
Access Time 7 ns

Tổng quan

Description

GD25Q64ESJGR is a 64 Mbit serial flash memory from GigaDevice. It stores firmware/data and is SPI-compatible, supporting standard, dual, and quad I/O (DQ) modes for higher throughput. Key points:
- Supply: 2.7–3.6 V; 8-pin package (GR suffix denotes RoHS-compliant)
- Capacity: 64 Mbit (8 MB)
- Addressing: supports 3-byte and 4-byte addressing
- Memory organization: 256-byte page; erase: 4 KB sectors, larger blocks (e.g., 32 KB/64 KB), plus chip erase
- Speed: fast read up to about 104 MHz in SPI mode (Quad/dual modes offer higher throughput)
- Features: power-down, resume, status register, write enable/disable, typical endurance and data retention characteristic of NOR-type flash
- Applications: firmware storage, boot devices, data logging, embedded systems
For exact electrical specs, timing, and mode details, refer to the GD25Q64ESJGR datasheet.

Equivalent

Equivalent 64-Mbit serial flash products (SPI/Quad-SPI) from major vendors:
- Winbond: W25Q64JV, W25Q64FV
- Macronix: MX25L64, MX25U64
- Spansion/Cypress: S25FL064K
- Micron: N25Q64A
- ISSI: IS25LP64
- SST/Microchip: SST25VF064C
Note: voltage, timing, and Quad/SPI mode vary; verify cross‑reference and datasheets for exact pinout/timing.

Features

Key features of GD25Q64ESJGR (64-Mbit SPI serial flash):
- Density: 64 Mbit (8 MBytes)
- Interface: SPI serial flash memory (standard SPI)
- Read: fast read up to 104 MHz
- Page program: 256-byte pages
- Erase types: 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Endurance: typically 100,000 program/erase cycles
- Data retention: >20 years
- Power: operating voltage 2.7–3.6 V
- Power-saving: deep power-down mode
- Operating temp: -40°C to 85°C (industrial grade; check exact variant)
- Package: 8-pin serial flash (e.g., SOP-8)
- Security: status register and block-protection features for write protection
Note: exact protections, modes, and grade may vary by package/stepping; consult the datasheet for specifics.

Pinout

Pin count: 8 pins (SOP-8).
Function: 64-Mbit serial flash memory (GD25Q64ES) that is accessed via SPI. Pins typically include CS, CLK, DI (MOSI), DO (MISO), WP#, HOLD#, VCC, and GND. Used to store firmware/data in embedded systems.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GD), often branded as GigaDevice.
- What kind of company: A Chinese fabless semiconductor company that designs and markets flash memory (serial NOR/NAND) and related ICs, outsourcing manufacturing to external foundries.

Application

GD25Q64ESJGR is a 64‑Mbit (8‑Mbyte) serial flash memory (SPI). Common application areas:
- Boot and firmware storage for microcontrollers/SoCs (XIP code, bootloaders)
- Firmware updates and OTA reflashing in IoT, consumer electronics, networking gear
- External code and data storage for embedded systems (applications, assets, fonts, LUTs, graphics)
- Data logging and nonvolatile parameter/config storage in industrial equipment, automotive modules, and appliances
- General external storage for MCUs requiring low pin count and fast random access

Package

GD25Q64ESJGR uses an 8-pin SOP (SOIC-8) package, RoHS-compliant (lead-free).

Sản phẩm liên quan đến GD25Q64ESJGR