HMC744LC3

Hình ảnh chỉ để tham khảo

HMC744LC3

+BOM

IC CLK BUFFER 1:2 14GHZ 16SMD

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Supplier Analog Devices Inc.
Package Strip
ProductStatus Active
Type Fanout Buffer (Distribution)
NumberofCircuits 1
Ratio-Input:Output 1:2
Differential-Input:Output Yes/Yes
Input CML
Output CML
Frequency-Max 14 GHz
Voltage-Supply 3V ~ 3.6V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 16-VFCQFN Exposed Pad

Tổng quan

Description

HMC744LC3 is an RF/microwave monolithic mixer IC from Hittite (now Analog Devices). It’s an 8‑lead LCC packaged MMIC that provides frequency conversion by mixing RF and LO signals to produce an IF output. The device is used in front‑end modules for up/down conversion in communication and radar systems, and it requires external matching networks and a bias/drive per the datasheet. Typical use cases include receivers and transmitters where frequency translation and image rejection are needed. Exact performance (frequency range, gain, noise figure, third‑order intercept, LO drive, and bias requirements) depends on the chosen matching and operating conditions, so the datasheet should be consulted for specific specs and application recommendations.

Equivalent

I need the device’s function and frequency to give precise cross-references. HMC744LC3 is a Hittite GaAs MMIC; substitutes depend on whether it’s an amplifier, mixer, etc., and the RF band. Please specify the exact function and operating band (e.g., RF amplifier 0.5–2 GHz). I can then provide concrete equivalents from Analog Devices, Mini-Circuits, Skyworks, and M/A-COM.

Pinout

Pin count: 8 pins. Function: Broadband GaAs MMIC mixer (RF/LO/IF ports) in an 8‑pin package.

Manufacturer

Manufacturer: Analog Devices, Inc. (ADI).
Origin: The HMC prefix comes from Hittite Microwave Corporation, a fabless RF/microwave IC design and manufacturing company. Hittite was acquired by Analog Devices in 2014, so the part is now produced by ADI, a global semiconductor company specializing in analog, RF, and microwave ICs and subsystems.

Application

Typical application areas for HMC744LC3 include RF/microwave front-end modules such as mixers and frequency translators used in wireless transceivers, radar, satellite links, and test instrumentation. Suitable for LO–mixer networks, up-conversion/down-conversion stages, and IF processing in communications systems. Also applicable to aerospace/defense RF front-ends and automotive radar where compact, high-frequency MMICs are needed.

Package

Leadless ceramic package (LCC), 3×3 mm.

Sản phẩm liên quan đến HMC744LC3

So sánh liên quan

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho HMC744LC3 sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.