ICP-10111

Hình ảnh chỉ để tham khảo

ICP-10111

+BOM

SENSOR 15.95PSIA 8LGA

  • Nhà sản xuấtTDK InvenSense

  • Ông. Phần #ICP-10111

  • Bảng dữ liệu ICP-10111 DataSheet

  • Có sẵn2971

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Part Status Last Time Buy
Applications Board Mount
Pressure Type Absolute
Operating Pressure 4.35PSI ~ 15.95PSI (30kPa ~ 110kPa)
Output Type I2C
Voltage - Supply 1.8V
Port Style No Port
Termination Style SMD (SMT) Tab
Operating Temperature -40°C ~ 85°C
Mounting Type Surface Mount
Package / Case 8-VFLGA
Supplier Device Package 8-LGA (2x2.5)
Packaging Cut Tape (CT), Tape & Reel (TR)

Tổng quan

Description

The ICP-10111 is a high-precision barometric pressure and temperature sensor produced by TDK’s InvenSense. This sensor is part of the ICP-101xx series, leveraging the company's capacitive MEMS (Micro-Electro-Mechanical Systems) technology to provide accurate and reliable environmental data. The ICP-10111 is designed for applications such as mobile devices, wearables, and Internet of Things (IoT) devices, where low power consumption and compact size are crucial.
The sensor features a pressure range of 300 to 1100 hPa and boasts high accuracy with low noise and minimal drift over time. It provides fast response times and supports a wide temperature operating range. The ICP-10111 is typically used for altitude measurements, weather forecasting, and indoor navigation. Its low power consumption makes it ideal for battery-operated devices. The sensor interfaces with devices via an I²C or SPI bus, ensuring easy integration into various systems. Overall, the ICP-10111 is valued for its precision, efficiency, and versatility in environmental sensing applications.

Equivalent

The ICP-10111 chip is a capacitive pressure sensor from TDK InvenSense, known for its low power and high precision. Equivalent products could include:
1. Bosch BMP388- Ultra-small and low-power pressure sensor.
2. STMicroelectronics LPS22HH - High-performance MEMS nano pressure sensor.
3. TE Connectivity MS5637 - Micro altimeter with low power consumption.
4. Bosch BME280 - Integrated environmental sensor with pressure, humidity, and temperature measurement.
These alternatives offer similar features for applications requiring pressure sensing.

Features

The ICP-10111 is a high-precision barometric pressure and temperature sensor from TDK InvenSense. It features an ultra-low noise pressure sensor that provides high accuracy and low power consumption, making it suitable for a wide range of applications including mobile devices, wearables, and IoT devices. Key features include:
1. Pressure Range: 300 to 1100 hPa.
2. Low Power Consumption: Operates at a low power level, ideal for battery-powered devices.
3. High Accuracy: Accurate pressure measurements with low noise levels.
4. Temperature Sensor: Integrated for temperature compensation of pressure readings.
5. Digital Interface: I²C interface for easy integration with microcontrollers.
6. Small Form Factor: Compact size for space-constrained applications.
7. Low Profile Package: Suitable for thin-profile designs.
8. Robust Design: Resistant to water and chemicals, enhancing durability in various environments.
These features make the ICP-10111 suitable for applications in altimetry, weather monitoring, and indoor navigation, among others.

Pinout

The ICP-10111 is a high-precision, low-power digital pressure and temperature sensor developed by TDK InvenSense. It typically comes in a small form factor that incorporates a MEMS capacitive pressure sensor and a temperature sensor. The ICP-10111 is housed in a 3.55mm x 3.55mm x 0.95mm package and is often used in applications requiring precise environmental pressure measurements.
The pin count for the ICP-10111 is typically 8 pins. These pins are used for power supply, communication interfaces, and control signals. The sensor commonly supports I²C communication protocol for data transmission. Here is a general description of the pin functions:
1. VDD: Power supply pin.
2. GND: Ground pin.
3. SDA: Serial data line for I²C interface.
4. SCL: Serial clock line for I²C interface.
5. INT: Interrupt pin for signaling events.
6. CSB: Chip select pin (used in SPI mode, not typically active in I²C mode).
7. VDDIO: I/O voltage supply pin.
8. NC: No connection (may be present depending on specific packaging).
These general pin functions enable the ICP-10111 to interface easily with microcontrollers and other digital systems for pressure and temperature sensing applications.

Manufacturer

The ICP-10111 is manufactured by TDK InvenSense, a company that specializes in motion and environmental sensors. TDK InvenSense is a subsidiary of TDK Corporation, a multinational electronics company based in Japan. TDK Corporation is known for producing a wide range of electronic components and systems, including sensors, capacitors, inductors, and magnetic products. TDK InvenSense specifically focuses on the development and production of MEMS (Micro-Electro-Mechanical Systems) sensors, which are used in various applications such as consumer electronics, automotive systems, and industrial equipment.

Application

The ICP-10111 is a high-precision, low-power MEMS barometric pressure and temperature sensor. Its application areas include:
1. Consumer Electronics: Enhancing user experience in smartphones, tablets, and wearables by improving altitude tracking and environmental sensing.
2. IoT Devices: Providing accurate environmental data for smart home devices and industrial IoT applications.
3. Drones and UAVs: Assisting in altitude stabilization and navigation by supplying precise pressure data.
4. Weather Stations: Enabling portable and precise atmospheric pressure measurements for weather forecasting.
5. Medical Devices: Used in respiratory monitoring to track breath pressure changes.
6. Sports and Fitness: Offering altitude and environmental data for performance tracking in outdoor activities.

Package

The ICP-10111 is a high-precision barometric pressure and temperature sensor from TDK InvenSense, and it comes in a compact, 3.3mm x 3.3mm x 0.9mm LGA package.

Frequently Asked Questions


Q: What is the operating pressure range of the ICP-10111?
A: The ICP-10111 measures absolute pressure from 4.35 PSI to 15.95 PSI, corresponding to 30 kPa to 110 kPa.


Q: What communication interface does this sensor support?
A: It features an I2C output type, making it suitable for direct digital communication with microcontrollers.


Q: What is the supply voltage requirement for this component?
A: The device requires a nominal supply voltage of 1.8V, supporting low-power board mount applications.


Q: Is this pressure sensor suitable for open-air or ported applications?
A: No, it has a "No Port" style, designed for closed-chamber or board mount applications without external pressure ports.


Q: What is the mounting and package type for the ICP-10111?
A: It uses a surface mount 8-VFLGA package with SMD (SMT) Tab termination, supplied in 8-LGA (2x2.5mm) size.


Q: Can this sensor operate in extreme temperature environments?
A: Yes, its operating temperature range is -40°C to 85°C, suitable for industrial and consumer board mount uses.


Q: What is the current part status, and how is it packaged?
A: The part status is "Last Time Buy". It is available in Cut Tape (CT) and Tape & Reel (TR) packaging.


Sản phẩm liên quan đến ICP-10111

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho ICP-10111 sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.