Hình ảnh chỉ để tham khảo
IRF540NSTRRPBF
+BOMMOSFET N-CH 100V 33A D2PAK
-
Nhà sản xuấtCông nghệ Infineon
-
Ông. Phần #IRF540NSTRRPBF
-
Có sẵn6405
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | Infineon Technologies |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | HEXFET® |
| ProductStatus | Last Time Buy |
| FETType | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 100 V |
| Current-ContinuousDrain(Id)@25°C | 33A (Tc) |
| DriveVoltage(MaxRdsOnMinRdsOn) | 10V |
| RdsOn(Max)@IdVgs | 44mOhm @ 16A, 10V |
| Vgs(th)(Max)@Id | 4V @ 250µA |
| GateCharge(Qg)(Max)@Vgs | 71 nC @ 10 V |
| Vgs(Max) | ±20V |
| InputCapacitance(Ciss)(Max)@Vds | 1960 pF @ 25 V |
| PowerDissipation(Max) | 130W (Tc) |
| OperatingTemperature | -55°C ~ 175°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | D2PAK |
Tổng quan
Description
Key points:
- Vds: 100 V; Id: about 14 A (depends on case temperature).
- Rds(on): around 0.077 Ω typ at Vgs = 10 V (low conduction losses at higher gate drive).
- Gate drive: not a logic-level device; typically needs ~8–10 V for low Rdson; Vgs(th) ~ 2–4 V.
- Package/finish: Pb-free, tape-and-reel option (STRRPBF); commonly in a TO-220AB-type through-hole package.
- Applications: switch-mode power supplies, DC-DC converters, motor drivers, high-voltage switching.
- Designing tips: provide adequate heat sinking, gate protection and proper SOA consideration; review datasheet for avalanche rating and safe operating area.
If you’re selecting it, verify exact package, current at your temp, and drive voltage from the latest datasheet.
Equivalent
Features
- VDS = 100 V; ID (continuous) ≈ 14 A
- RDS(on) ≈ 0.077 Ω (typ) at VGS = 10 V (max ~0.1–0.12 Ω)
- Gate threshold ≈ 2.0–4.0 V
- Not a logic-level device; requires around 10 V gate drive for full conduction
- Avalanche energy rugged and suitable for switching applications
- Fast switching capability with low gate charge
- Pb-free / RoHS-compliant package (STRRPBF)
Typical uses: switching regulators, motor control, DC-DC converters, power supplies. Note: exact RDS(on) and performance depend on temperature and VGS drive.
Pinout
Pin functions:
- Pin 1 — Gate (G): control/input terminal that modulates the channel.
- Pin 2 — Drain (D): main current-carrying terminal; typically connected to the package tab/heatsink.
- Pin 3 — Source (S): return/reference terminal for the device.
Note: IRF540NSTRRPBF is an N‑channel enhancement MOSFET; common packages (TO‑220, DPAK/TO‑252) use the same pin ordering: 1=Gate, 2=Drain (tab), 3=Source.
Manufacturer
Application
- Switching power supplies and DC-DC converters (buck/boost/buck‑boost)
- Power management circuits, load switches, pre-regulators
- Motor control (DC motors, small stepper drives)
- Inverters and renewable energy electronics (solar charge controllers, UPS)
- Class D audio output stages and other high‑current switching tasks
In short: general-purpose high-voltage, moderate-current switching and amplification applications.