Hình ảnh chỉ để tham khảo
IS25WP064D-JBLE-TR
+BOMIC FLASH 64MBIT SPI/QUAD 8SOIC
-
Nhà sản xuấtISSI, Integrated Silicon Solution Inc
-
Ông. Phần #IS25WP064D-JBLE-TR
-
Có sẵn4329
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Active |
| Base Product Number | IS25WP064 |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR (SLC) |
| Memory Size | 64Mbit |
| Memory Organization | 8M x 8 |
| Memory Interface | SPI - Quad I/O, QPI, DTR |
| Clock Frequency | 166 MHz |
| Write Cycle Time - Word, Page | 40µs, 800µs |
| Voltage - Supply | 1.65V ~ 1.95V |
| Operating Temperature | -40°C ~ 105°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.209", 5.30mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
| Grade | Automotive |
| Qualification | AEC-Q100 |
Tổng quan
Description
IS25WP064D-JBLE-TR is a 64-Mbit serial NOR flash memory from ISSI, used for firmware and data storage in embedded systems. Key points:
- Capacity: 64 Mbit (8 MB)
- Interface: SPI-compatible with optional Dual/Quad I/O modes for higher throughput
- Voltage: 2.7–3.6 V
- Organization: 256-byte pages; sectors/blocks for erase
- Features: standard/fast read, deep power-down, hardware write protection
- Endurance/retention: typical erase/program cycles around 100k with long data retention
- Packaging: JBLE variant in an 8-pin package; TR indicates Tape & Reel for high-volume assembly
- Applications: boot flash, code storage, parameter tables, data logging
Note: exact timing, voltage ranges, endurance, and packaging depend on the specific order/revision. Consult the latest ISSI datasheet and ordering info for precise specifications.
- Capacity: 64 Mbit (8 MB)
- Interface: SPI-compatible with optional Dual/Quad I/O modes for higher throughput
- Voltage: 2.7–3.6 V
- Organization: 256-byte pages; sectors/blocks for erase
- Features: standard/fast read, deep power-down, hardware write protection
- Endurance/retention: typical erase/program cycles around 100k with long data retention
- Packaging: JBLE variant in an 8-pin package; TR indicates Tape & Reel for high-volume assembly
- Applications: boot flash, code storage, parameter tables, data logging
Note: exact timing, voltage ranges, endurance, and packaging depend on the specific order/revision. Consult the latest ISSI datasheet and ordering info for precise specifications.
Equivalent
Equivalent 64-Mbit SPI-NOR flash parts (similar interface):
- Winbond W25Q64FV / W25Q64JV
- Macronix MX25L64F (and variants)
- Spansion S25FL064K / S25FL064P
- GigaDevice GD25Q64C (or GD25Q64B)
- ISSI IS25LP064D
Note: voltage, timing, and Quad/Dual I/O support vary by part revision—check datasheets for exact specs and packaging.
- Winbond W25Q64FV / W25Q64JV
- Macronix MX25L64F (and variants)
- Spansion S25FL064K / S25FL064P
- GigaDevice GD25Q64C (or GD25Q64B)
- ISSI IS25LP064D
Note: voltage, timing, and Quad/Dual I/O support vary by part revision—check datasheets for exact specs and packaging.
Features
IS25WP064D-JBLE-TR features (concise):
- 64-Mbit (8 MByte) serial NOR flash memory
- SPI-compatible interface with Single, Dual, and Quad I/O (QSPI)
- 2.7–3.6 V operation; low-power modes; deep power-down
- 3-byte addressing (suitable for up to 16 MBytes; 64 Mbit accessible)
- 256-byte page program; fast/random read
- Erase options: 4 KB sectors; 32 KB/64 KB blocks; chip erase
- Endurance ~100k P/E cycles; data retention typically long-term
- Security features: software/hardware write protection, block protection, security registers
- Status/ready-busy signaling; reset support
- Packaging: JBLE 8-pin with Tape & Reel (TR) option
- Industrial temperature range (typical -40°C to 85°C)
- 64-Mbit (8 MByte) serial NOR flash memory
- SPI-compatible interface with Single, Dual, and Quad I/O (QSPI)
- 2.7–3.6 V operation; low-power modes; deep power-down
- 3-byte addressing (suitable for up to 16 MBytes; 64 Mbit accessible)
- 256-byte page program; fast/random read
- Erase options: 4 KB sectors; 32 KB/64 KB blocks; chip erase
- Endurance ~100k P/E cycles; data retention typically long-term
- Security features: software/hardware write protection, block protection, security registers
- Status/ready-busy signaling; reset support
- Packaging: JBLE 8-pin with Tape & Reel (TR) option
- Industrial temperature range (typical -40°C to 85°C)
Pinout
Pin count: 8 pins.
Function: IS25WP064D-JBLE-TR is an 8‑pin SPI Serial Flash memory. Pinout (typical):
- Pin 1: CS (Chip Select)
- Pin 2: SO / D0 (Serial Data Output)
- Pin 3: WP# (Write Protect)
- Pin 4: GND
- Pin 5: SI / D1 (Serial Data Input)
- Pin 6: SCK (Serial Clock)
- Pin 7: HOLD# (Hold)
- Pin 8: VCC (Power)
Notes: TR denotes tape-and-reel packaging.
Function: IS25WP064D-JBLE-TR is an 8‑pin SPI Serial Flash memory. Pinout (typical):
- Pin 1: CS (Chip Select)
- Pin 2: SO / D0 (Serial Data Output)
- Pin 3: WP# (Write Protect)
- Pin 4: GND
- Pin 5: SI / D1 (Serial Data Input)
- Pin 6: SCK (Serial Clock)
- Pin 7: HOLD# (Hold)
- Pin 8: VCC (Power)
Notes: TR denotes tape-and-reel packaging.
Manufacturer
- Manufacturer: Integrated Silicon Solution, Inc. (ISSI)
- What kind of company: A fabless semiconductor company that designs and markets memory products (NOR Flash, SRAM, DRAM, etc.).
- What kind of company: A fabless semiconductor company that designs and markets memory products (NOR Flash, SRAM, DRAM, etc.).
Application
IS25WP064D-JBLE-TR is a 64‑Mbit serial (SPI) flash memory. Typical application areas:
- Firmware/code storage and boot flash for MCUs/SoCs
- Firmware update images and OTA storage
- Data logging, event storage, and configuration data
- Look-up tables, calibration data, and sensor data buffers
- Secure/secret data storage (where supported)
- Automotive, industrial, networking, and IoT devices needing reliable nonvolatile storage
- Consumer electronics (set‑top boxes, printers, wearables, etc.) requiring compact, persistent firmware/data storage
Note: suitable for any application needing nonvolatile, fast-access code/data storage.
- Firmware/code storage and boot flash for MCUs/SoCs
- Firmware update images and OTA storage
- Data logging, event storage, and configuration data
- Look-up tables, calibration data, and sensor data buffers
- Secure/secret data storage (where supported)
- Automotive, industrial, networking, and IoT devices needing reliable nonvolatile storage
- Consumer electronics (set‑top boxes, printers, wearables, etc.) requiring compact, persistent firmware/data storage
Note: suitable for any application needing nonvolatile, fast-access code/data storage.
Package
It’s an 8-pin SOP (SOIC) serial flash package; TR denotes Tape & Reel packaging.
