Hình ảnh chỉ để tham khảo
ISO7740DW
+BOMDGTL ISOLTR 5KV 4CH GP 16-SOIC
-
Nhà sản xuấtTexas Dụng cụ
-
Ông. Phần #ISO7740DW
-
Có sẵn24134
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Obsolete |
| Base Product Number | ISO7740 |
| Technology | Capacitive Coupling |
| Type | General Purpose |
| Isolated Power | No |
| Number of Channels | 4 |
| Inputs - Side 1/Side 2 | 4/0 |
| Channel Type | Unidirectional |
| Voltage - Isolation | 5000Vrms |
| Common Mode Transient Immunity (Min) | 85kV/µs |
| Data Rate | 100Mbps |
| Propagation Delay tpLH / tpHL (Max) | 16ns, 16ns |
| Pulse Width Distortion (Max) | 4.9ns |
| Rise / Fall Time (Typ) | 2.4ns, 2.4ns |
| Voltage - Supply | 2.25V ~ 5.5V |
| Operating Temperature | -55°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package | 16-SOIC (0.295", 7.50mm Width) |
| Supplier Device Package | 16-SOIC |
| Packaging | Tube |
Tổng quan
Description
Introduction to ISO7740DW
- A Texas Instruments digital isolator (iCoupler technology) with two independent data channels.
- Provides galvanic isolation between the host (primary) side and the remote (secondary) side to protect low-voltage circuitry from high-voltage transients.
- Each channel transfers a unidirectional logic signal across the isolation barrier; supports common signaling interfaces (e.g., SPI, I2C, UART) depending on how you wire it.
- Separate supply rails on both sides (typical V_A and V_B), enabling compatible logic levels (e.g., 3.3 V/5 V) on each side.
- Key benefits: high isolation voltage, low power, fast data propagation, good common-mode transient immunity, and wide operating temperature—suited for industrial, automotive, and medical applications.
- For exact isolation rating, propagation delay, input/output levels, package options, and timing, refer to the ISO7740DW datasheet.
- A Texas Instruments digital isolator (iCoupler technology) with two independent data channels.
- Provides galvanic isolation between the host (primary) side and the remote (secondary) side to protect low-voltage circuitry from high-voltage transients.
- Each channel transfers a unidirectional logic signal across the isolation barrier; supports common signaling interfaces (e.g., SPI, I2C, UART) depending on how you wire it.
- Separate supply rails on both sides (typical V_A and V_B), enabling compatible logic levels (e.g., 3.3 V/5 V) on each side.
- Key benefits: high isolation voltage, low power, fast data propagation, good common-mode transient immunity, and wide operating temperature—suited for industrial, automotive, and medical applications.
- For exact isolation rating, propagation delay, input/output levels, package options, and timing, refer to the ISO7740DW datasheet.
Features
Here are the typical features of ISO7740DW (digital isolator):
- Dual-channel (two unidirectional data paths) isolatedDigital isolator
- Galvanic isolation between input and output (high common-mode rejection)
- Isolation rating: around 5 kV RMS
- Supply voltage: 3.3 V or 5 V operation (often supports 3.3/5 V domains)
- CMOS/TTL-compatible input and output thresholds
- High common-mode transient immunity (CMIT) for robust operation
- Fast data transfer with low propagation delay (tPD in the low tens of nanoseconds)
- Low power consumption in normal operation
- Compact 8-pin DW package (RoHS-compliant), suitable for surface-mount
- Industrial temperature range (typically -40°C to +125°C)
Note: exact numbers (data rate, tPD, CMIT, and package details) may vary by variant. Refer to the specific datasheet for precise specs.
- Dual-channel (two unidirectional data paths) isolatedDigital isolator
- Galvanic isolation between input and output (high common-mode rejection)
- Isolation rating: around 5 kV RMS
- Supply voltage: 3.3 V or 5 V operation (often supports 3.3/5 V domains)
- CMOS/TTL-compatible input and output thresholds
- High common-mode transient immunity (CMIT) for robust operation
- Fast data transfer with low propagation delay (tPD in the low tens of nanoseconds)
- Low power consumption in normal operation
- Compact 8-pin DW package (RoHS-compliant), suitable for surface-mount
- Industrial temperature range (typically -40°C to +125°C)
Note: exact numbers (data rate, tPD, CMIT, and package details) may vary by variant. Refer to the specific datasheet for precise specs.
Pinout
- Pin count: 8 pins
- Function: Single-channel galvanically isolated digital isolator (unidirectional); transfers a logic signal from the input side to the output side across an isolation barrier, with separate supply rails on each side (VCC1/GND1 and VCC2/GND2).
- Function: Single-channel galvanically isolated digital isolator (unidirectional); transfers a logic signal from the input side to the output side across an isolation barrier, with separate supply rails on each side (VCC1/GND1 and VCC2/GND2).
Manufacturer
- Manufacturer: Texas Instruments (TI).
- What kind of company: TI is a global semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits and related products.
- What kind of company: TI is a global semiconductor company that designs and manufactures analog, mixed-signal, and embedded processing integrated circuits and related products.
Application
ISO7740DW is a digital isolator used to pass signals across an isolation barrier while keeping grounds separate. Common application areas include:
- Industrial automation and process control (isolated I/O, PLC interfaces, sensor/actuator nets)
- Motor drives and power electronics (gate-drive isolation for IGBTs/MOSFETs, inverters)
- Data acquisition and instrumentation (protects microcontrollers from HV transients/EMI)
- Automotive and transportation electronics (ECUs, BMS, sensor isolation)
- Medical and safety-critical equipment (system/patient safety isolation)
- Consumer electronics and distributed power supplies requiring isolation.
- Industrial automation and process control (isolated I/O, PLC interfaces, sensor/actuator nets)
- Motor drives and power electronics (gate-drive isolation for IGBTs/MOSFETs, inverters)
- Data acquisition and instrumentation (protects microcontrollers from HV transients/EMI)
- Automotive and transportation electronics (ECUs, BMS, sensor isolation)
- Medical and safety-critical equipment (system/patient safety isolation)
- Consumer electronics and distributed power supplies requiring isolation.
Package
The ISO7740DW uses the "DW" package: an 8-pin SOIC (surface-mount small‑outline IC) package (approx. 3.9 mm body width).
