Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package | Tube |
| Series | HiPerFET™, Polar |
| ProductStatus | Active |
| FETType | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 800 V |
| Current-ContinuousDrain(Id)@25°C | 44A (Tc) |
| DriveVoltage(MaxRdsOnMinRdsOn) | 10V |
| RdsOn(Max)@IdVgs | 190mOhm @ 22A, 10V |
| Vgs(th)(Max)@Id | 5V @ 8mA |
| GateCharge(Qg)(Max)@Vgs | 198 nC @ 10 V |
| Vgs(Max) | ±30V |
| InputCapacitance(Ciss)(Max)@Vds | 12000 pF @ 25 V |
| PowerDissipation(Max) | 1040W (Tc) |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Through Hole |
| SupplierDevicePackage | TO-264AA (IXFK) |
Tổng quan
Description
IXFK44N80P is a type of power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) designed for high-voltage applications. Manufactured by IXYS Corporation, it features an N-channel enhancement mode, which means it requires a positive voltage applied to the gate relative to the source to conduct electricity. This MOSFET is known for its high efficiency and fast switching capabilities, making it suitable for demanding applications that require handling high power levels.
Key specifications of the IXFK44N80P include a drain-source voltage (V_DS) of 800V and a continuous drain current (I_D) of approximately 44A, allowing it to handle substantial electrical loads. Its low on-resistance minimizes energy losses during operation, contributing to overall efficiency. The device is often used in industrial, automotive, and renewable energy applications, such as motor drives, power supplies, and inverters. Its robust construction and ability to operate at high temperatures further enhance its reliability in harsh environments.
Key specifications of the IXFK44N80P include a drain-source voltage (V_DS) of 800V and a continuous drain current (I_D) of approximately 44A, allowing it to handle substantial electrical loads. Its low on-resistance minimizes energy losses during operation, contributing to overall efficiency. The device is often used in industrial, automotive, and renewable energy applications, such as motor drives, power supplies, and inverters. Its robust construction and ability to operate at high temperatures further enhance its reliability in harsh environments.
Equivalent
The IXFK44N80P is a power MOSFET. Equivalent products may include:
1. STMicroelectronics STW44NM60ND
2. Infineon IPA60R199CP
3. NXP BUK9511-80A
4. Toshiba TK31J60U
5. ON Semiconductor FDL100N50F
These alternatives are selected based on similar voltage and current ratings. However, it's essential to verify specific parameters and pin configurations for compatibility.
1. STMicroelectronics STW44NM60ND
2. Infineon IPA60R199CP
3. NXP BUK9511-80A
4. Toshiba TK31J60U
5. ON Semiconductor FDL100N50F
These alternatives are selected based on similar voltage and current ratings. However, it's essential to verify specific parameters and pin configurations for compatibility.
Features
The IXFK44N80P is a high-voltage N-channel MOSFET designed for various power applications. Key features include:
1. Voltage and Current Ratings: It typically has a high voltage rating, often around 800V, making it suitable for applications requiring high voltage handling. The current rating is usually around 44A.
2. Low On-Resistance: This MOSFET is characterized by a low on-resistance, which ensures efficient power conduction and minimizes power loss during operation.
3. Robust Construction: It is designed to handle high power levels, featuring robust construction that allows it to operate reliably in challenging conditions.
4. Fast Switching Speeds: The device is capable of fast switching, which is beneficial in applications that require rapid changes in current or voltage, such as inverters and switch-mode power supplies.
5. Thermal Performance: Good thermal management is a highlight, often supported by a TO-264 package that aids in heat dissipation.
6. Applications: Commonly used in industrial, automotive, and consumer electronics for power conversion, motor drives, and other high-power switching tasks.
These features make the IXFK44N80P a versatile choice for demanding power electronics applications.
1. Voltage and Current Ratings: It typically has a high voltage rating, often around 800V, making it suitable for applications requiring high voltage handling. The current rating is usually around 44A.
2. Low On-Resistance: This MOSFET is characterized by a low on-resistance, which ensures efficient power conduction and minimizes power loss during operation.
3. Robust Construction: It is designed to handle high power levels, featuring robust construction that allows it to operate reliably in challenging conditions.
4. Fast Switching Speeds: The device is capable of fast switching, which is beneficial in applications that require rapid changes in current or voltage, such as inverters and switch-mode power supplies.
5. Thermal Performance: Good thermal management is a highlight, often supported by a TO-264 package that aids in heat dissipation.
6. Applications: Commonly used in industrial, automotive, and consumer electronics for power conversion, motor drives, and other high-power switching tasks.
These features make the IXFK44N80P a versatile choice for demanding power electronics applications.
Pinout
The IXFK44N80P is a power MOSFET with a TO-264 package. It typically has a three-pin configuration, which is common for most MOSFETs. The pin functions are as follows:
1. Gate (G): This pin controls the MOSFET's switching action. A voltage applied to the gate allows current to flow between the drain and source.
2. Drain (D): This is the terminal through which the main current flows from drain to source when the MOSFET is in the "on" state.
3. Source (S): This pin is the terminal through which the current exits the MOSFET.
Additionally, there is a fourth terminal, the metal tab or the back of the package, which is connected to the drain and helps in heat dissipation.
The IXFK44N80P is designed for high-voltage, high-current applications and is used in various power electronics applications.
1. Gate (G): This pin controls the MOSFET's switching action. A voltage applied to the gate allows current to flow between the drain and source.
2. Drain (D): This is the terminal through which the main current flows from drain to source when the MOSFET is in the "on" state.
3. Source (S): This pin is the terminal through which the current exits the MOSFET.
Additionally, there is a fourth terminal, the metal tab or the back of the package, which is connected to the drain and helps in heat dissipation.
The IXFK44N80P is designed for high-voltage, high-current applications and is used in various power electronics applications.
Manufacturer
The IXFK44N80P is manufactured by IXYS Corporation. IXYS is a company that specializes in the development and production of power semiconductor and integrated circuit technologies. Founded in 1983, the company offers a range of products including power MOSFETs, IGBTs, rectifiers, and various types of power management and control circuits. IXYS serves a variety of industries, such as industrial, telecommunications, consumer electronics, and renewable energy sectors, providing solutions that improve efficiency and performance in power conversion and management applications. The company is known for its contributions to power electronics and has a reputation for innovation in the semiconductor industry.
Application
The IXFK44N80P is a N-channel MOSFET designed for high-voltage and high-current applications. Its primary application areas include:
1. Power Supply Units (PSUs): Used in switch-mode power supplies due to its efficiency in high-speed switching.
2. Motor Drives: Suitable for controlling DC motors in industrial applications.
3. Inverters: Utilized in renewable energy systems like solar inverters.
4. Uninterruptible Power Supplies (UPS): Provides reliable power conversion.
5. Inductive Heating and Welding: Operates efficiently in high-frequency induction systems.
6. Lighting Systems: Applied in high-intensity discharge (HID) lighting and LED drivers.
These applications benefit from its high voltage capability, fast switching speed, and thermal performance.
1. Power Supply Units (PSUs): Used in switch-mode power supplies due to its efficiency in high-speed switching.
2. Motor Drives: Suitable for controlling DC motors in industrial applications.
3. Inverters: Utilized in renewable energy systems like solar inverters.
4. Uninterruptible Power Supplies (UPS): Provides reliable power conversion.
5. Inductive Heating and Welding: Operates efficiently in high-frequency induction systems.
6. Lighting Systems: Applied in high-intensity discharge (HID) lighting and LED drivers.
These applications benefit from its high voltage capability, fast switching speed, and thermal performance.
Package
The IXFK44N80P is a power MOSFET with a TO-264 package type.
