Hình ảnh chỉ để tham khảo
JFM25F128A-E16
+BOM-
Nhà sản xuấtJLCPCB Assembly
-
Ông. Phần #JFM25F128A-E16
-
Có sẵn27643
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Manufacturer | JLCPCB Assembly |
| Package | SOP-16 |
Tổng quan
Description
The JFM25F128A-E16 is a 128Mb (16MB) serial NOR Flash memory chip from Fudan Microelectronics. It features:
- SPI interface (supports Standard, Dual, and Quad modes)
- High-speed performance: Up to 104MHz clock frequency
- Low power consumption: Ideal for embedded systems
- Wide voltage range: 2.7V–3.6V operation
- Reliable endurance: 100,000 program/erase cycles
- Long data retention: 20 years
Commonly used in IoT, automotive, industrial control, and consumer electronics, it offers fast read/write speeds and secure data storage. The E16 suffix indicates a 16-pin SOP package.
For detailed specs, refer to the datasheet.
- SPI interface (supports Standard, Dual, and Quad modes)
- High-speed performance: Up to 104MHz clock frequency
- Low power consumption: Ideal for embedded systems
- Wide voltage range: 2.7V–3.6V operation
- Reliable endurance: 100,000 program/erase cycles
- Long data retention: 20 years
Commonly used in IoT, automotive, industrial control, and consumer electronics, it offers fast read/write speeds and secure data storage. The E16 suffix indicates a 16-pin SOP package.
For detailed specs, refer to the datasheet.
Equivalent
Equivalent products to the JFM25F128A-E16 (128Mb SPI NOR Flash) include:
- Winbond W25Q128JVSIQ
- Macronix MX25L12835FMI-10G
- Micron MT25QL128ABA1EW9-0SIT
- GigaDevice GD25Q128ESIGR
These chips offer similar 128Mb capacity, SPI interface, and comparable speeds (up to 104MHz). Verify pinout, voltage, and timing for compatibility.
- Winbond W25Q128JVSIQ
- Macronix MX25L12835FMI-10G
- Micron MT25QL128ABA1EW9-0SIT
- GigaDevice GD25Q128ESIGR
These chips offer similar 128Mb capacity, SPI interface, and comparable speeds (up to 104MHz). Verify pinout, voltage, and timing for compatibility.
Features
The JFM25F128A-E16 is a 128Mb (16MB) SPI NOR Flash memory with the following key features:
- Interface: SPI (Serial Peripheral Interface) with up to 104MHz clock speed (Quad I/O supported).
- Density: 128Mbit (16MB), organized in uniform 4KB sectors and 64KB blocks.
- Voltage Range: 2.7V–3.6V (single power supply).
- Performance: Fast read/write speeds (typical 50ms erase time for 64KB block).
- Endurance: 100,000 program/erase cycles per sector.
- Retention: 20+ years data retention.
- Security: Software/hardware write protection and unique 64-bit serial number.
- Package: 8-pin SOP (208mil).
- Operating Temp.: -40°C to +85°C (industrial-grade).
Ideal for firmware storage, IoT, automotive, and embedded systems.
- Interface: SPI (Serial Peripheral Interface) with up to 104MHz clock speed (Quad I/O supported).
- Density: 128Mbit (16MB), organized in uniform 4KB sectors and 64KB blocks.
- Voltage Range: 2.7V–3.6V (single power supply).
- Performance: Fast read/write speeds (typical 50ms erase time for 64KB block).
- Endurance: 100,000 program/erase cycles per sector.
- Retention: 20+ years data retention.
- Security: Software/hardware write protection and unique 64-bit serial number.
- Package: 8-pin SOP (208mil).
- Operating Temp.: -40°C to +85°C (industrial-grade).
Ideal for firmware storage, IoT, automotive, and embedded systems.
Pinout
The JFM25F128A-E16 is a 128Mbit (16MB) SPI NOR Flash memory chip.
- Pin Count: 8-pin (common package: SOP8 or similar)
- Key Functions:
- SPI Interface: Supports standard SPI (CLK, MOSI, MISO, CS) and may support Dual/Quad SPI for faster transfers.
- Power Supply: Operates at 3.3V (typical).
- Additional Pins: WP# (Write Protect), HOLD# (Pause), and VCC/GND.
It is used for code storage, firmware updates, and data logging in embedded systems.
- Pin Count: 8-pin (common package: SOP8 or similar)
- Key Functions:
- SPI Interface: Supports standard SPI (CLK, MOSI, MISO, CS) and may support Dual/Quad SPI for faster transfers.
- Power Supply: Operates at 3.3V (typical).
- Additional Pins: WP# (Write Protect), HOLD# (Pause), and VCC/GND.
It is used for code storage, firmware updates, and data logging in embedded systems.
Manufacturer
The JFM25F128A-E16 is a 128Mb (16MB) SPI NOR flash memory chip manufactured by Fudan Microelectronics Group (FMSH), a Chinese semiconductor company.
Fudan Microelectronics specializes in designing and producing integrated circuits, including NOR flash memory, MCUs, and smart card chips. The company focuses on providing solutions for consumer electronics, IoT, and industrial applications.
The JFM25F128A-E16 is commonly used in devices requiring reliable, low-power, and high-speed data storage, such as set-top boxes, networking equipment, and embedded systems.
Fudan Microelectronics is known for its cost-effective alternatives to mainstream flash memory chips, catering primarily to the Chinese market.
Fudan Microelectronics specializes in designing and producing integrated circuits, including NOR flash memory, MCUs, and smart card chips. The company focuses on providing solutions for consumer electronics, IoT, and industrial applications.
The JFM25F128A-E16 is commonly used in devices requiring reliable, low-power, and high-speed data storage, such as set-top boxes, networking equipment, and embedded systems.
Fudan Microelectronics is known for its cost-effective alternatives to mainstream flash memory chips, catering primarily to the Chinese market.
