LM211DG

Hình ảnh chỉ để tham khảo

LM211DG

+BOM

IC COMPARATOR SGL 36VDC 8-SOIC

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Supplier Rochester Electronics, LLC,onsemi
Package Tube,Tube
ProductStatus Obsolete
Type General Purpose
NumberofElements 1
OutputType DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL
Voltage-SupplySingle/Dual(±) 5V ~ 30V, ±2.5V ~ 15V
Voltage-InputOffset(Max) 3mV @ ±15V
Current-InputBias(Max) 0.1µA @ ±15V
Current-Quiescent(Max) 6mA
OperatingTemperature -40°C ~ 85°C
Package/Case 8-SOIC (0.154, 3.90mm Width)
MountingType Surface Mount

Tổng quan

Description

LM211DG is a high-speed voltage comparator from Texas Instruments (LM211 family). It compares two analog inputs and outputs a digital signal via an open-collector (open-drain) output, so you need an external pull-up resistor. It’s designed for fast threshold/detection tasks (e.g., zero-crossing, PWM timing, fast comparators in control loops) and can run from a single or dual supply. The DG suffix indicates the RoHS-compliant package variant (typically 8-pin DIP/SOIC). For exact figures—propagation delay, input offset, supply range, and output current—consult the LM211 datasheet. Typical caveats: provide proper pull-up voltage, respect the input common-mode range (which includes the negative rail), and ensure compatibility with your logic level.

Equivalent

Equivalents (high‑speed voltage comparators) to LM211DG include:
- LM311 (single, open-collector)
- LM393 (dual)
- LM339 (quad)
- LM2901 (quad)
Note: choose based on required channel count, output type (open-collector), supply voltage, and speed. Other vendors’ similar high-speed comparators can also substitute if specs match.

Features

LM211DG is a high‑speed, internally compensated operational amplifier. Key features include:
- Internally compensated for easy closed‑loop use
- High slew rate and wide bandwidth for fast signals
- Unity‑gain stability
- Wide supply voltage range (suitable for single or dual supply)
- Input common‑mode range that includes the negative rail
- Output can swing close to the rails with proper load
- Low input bias current and low input offset voltage for precision
- Good temperature stability
- Available in 8‑pin DG package (standard TI package variant)
Note: exact electrical specs (slew rate, bandwidth, offset, rail‑to‑rail swing, and supply limits) are in the datasheet for precise design values.

Pinout

- Pin count: 8 pins (DIP-8/SO-8 packages).
- Function: a single high-speed voltage comparator (compares two input voltages and outputs a logic-level result).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures integrated circuits and related electronic components (analog, digital, microcontrollers, etc.).

Application

LM211DG is a high‑speed voltage comparator. Common applications include:
- Zero‑crossing/timing detectors in switching power supplies and motor drives
- PWM comparators and control loop thresholding
- A/D front‑end triggers and sample/hold timing
- Window/threshold detectors and reference sensing
- Data‑communications line receivers and demodulators
- Peak detectors and timing circuits
- Over/under‑voltage protection and fault detection in instrumentation and test equipment

Package

LM211DG comes in an 8-pin DIP (DIP-8) package, i.e., through-hole.

Sản phẩm liên quan đến LM211DG

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho LM211DG sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.