Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | NXP USA Inc. |
| Package | Tray |
| Series | HCS12 |
| ProductStatus | Active |
| CoreProcessor | HCS12 |
| CoreSize | 16-Bit |
| Speed | 25MHz |
| Connectivity | CANbus, I²C, SCI, SPI |
| Peripherals | PWM, WDT |
| NumberofI/O | 59 |
| ProgramMemorySize | 64KB (64K x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 1K x 8 |
| RAMSize | 4K x 8 |
| Voltage-Supply(Vcc/Vdd) | 2.35V ~ 5.25V |
| DataConverters | A/D 16x10b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 80-QFP |
Tổng quan
Description
MC9S12D64CFUE is an NXP/Freescale 16‑bit MCU from the HCS12D family. It combines a 16‑bit HCS12 CPU core with 64 KB of flash for code and about 4 KB of RAM, operating from a 2.7–5.5 V supply at up to roughly 50 MHz.
Key features:
- On‑chip peripherals: SCI/UARTs, SPI, I2C, ADC with multiple channels, 16‑bit timers, PWM, and a watchdog; interrupt controller; in‑system debug support.
- Power and safety: low‑power run/stop modes; automotive‑grade variants available.
- Memory/boot: standard flash with in‑system programming/back‑up options.
Typical uses: automotive and industrial controllers, motor control, instrumentation and other embedded systems needing a compact 16‑bit MCU.
Development: CodeWarrior for HCS12 (and related Freescale/NXP tools) with in‑circuit programming/debug via a BDM interface.
Package/suffix: CFUE denotes a specific device/package variant; refer to the datasheet for exact pinout, package, and temperature rating.
Key features:
- On‑chip peripherals: SCI/UARTs, SPI, I2C, ADC with multiple channels, 16‑bit timers, PWM, and a watchdog; interrupt controller; in‑system debug support.
- Power and safety: low‑power run/stop modes; automotive‑grade variants available.
- Memory/boot: standard flash with in‑system programming/back‑up options.
Typical uses: automotive and industrial controllers, motor control, instrumentation and other embedded systems needing a compact 16‑bit MCU.
Development: CodeWarrior for HCS12 (and related Freescale/NXP tools) with in‑circuit programming/debug via a BDM interface.
Package/suffix: CFUE denotes a specific device/package variant; refer to the datasheet for exact pinout, package, and temperature rating.
Features
Here are the key features of MC9S12D64CFUE (NXP Freescale):
- 16-bit HCS12 CPU core, up to ~40 MHz bus clock
- Memory: 64 KB on-chip flash, 4 KB RAM (on-chip memory map)
- Peripherals:
- ADC: 12-bit A/D converter with multiple channels
- Serial: SCI/UART modules (typically 2)
- Serial: SPI and I2C modules
- Timers/PWM: 16-bit timer/PWM capabilities (two timer modules common)
- Watchdog timer
- Analog comparator (where available)
- Debug/Programming: Background Debug Mode (BDM) for in-system programming and debugging
- Power: operates from 2.7 V to 5.5 V
- Low-power modes for sleep/stop
- Package: CFUE (80-pin LQFP) variant
Note: exact peripheral counts can vary by revision; consult datasheet for detailed block diagram and pinout.
- 16-bit HCS12 CPU core, up to ~40 MHz bus clock
- Memory: 64 KB on-chip flash, 4 KB RAM (on-chip memory map)
- Peripherals:
- ADC: 12-bit A/D converter with multiple channels
- Serial: SCI/UART modules (typically 2)
- Serial: SPI and I2C modules
- Timers/PWM: 16-bit timer/PWM capabilities (two timer modules common)
- Watchdog timer
- Analog comparator (where available)
- Debug/Programming: Background Debug Mode (BDM) for in-system programming and debugging
- Power: operates from 2.7 V to 5.5 V
- Low-power modes for sleep/stop
- Package: CFUE (80-pin LQFP) variant
Note: exact peripheral counts can vary by revision; consult datasheet for detailed block diagram and pinout.
Pinout
- Pin count: 64 pins (LQFP 64 package).
- Function: MC9S12D64CFUE is an HCS12 16‑bit microcontroller with 64 KB flash. It provides general-purpose I/O, an ADC, PWM outputs, multiple timers, and serial interfaces (SCI, SPI, and I2C) for embedded control applications.
- Function: MC9S12D64CFUE is an HCS12 16‑bit microcontroller with 64 KB flash. It provides general-purpose I/O, an ADC, PWM outputs, multiple timers, and serial interfaces (SCI, SPI, and I2C) for embedded control applications.
Manufacturer
- Manufacturer: NXP Semiconductors (the MC9S12D64CFUE is from the HCS12 family; originally Freescale, now under NXP after the 2015 acquisition).
- Company type: A Dutch multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, analog and security ICs for automotive, industrial, and consumer markets.
- Company type: A Dutch multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, analog and security ICs for automotive, industrial, and consumer markets.
Application
MC9S12D64CFUE is a 16‑bit HCS12 MCU with 64 KB flash and versatile peripherals, suitable for a range of embedded applications:
- Automotive body/chassis electronics (sensors, lighting, actuators)
- Engine/powertrain sensors and control
- Industrial automation and motor control
- Instrumentation, data acquisition and measurement systems
- Building automation, HVAC and energy management
- Consumer electronics and home appliances
- Small robotics and general embedded control tasks
- Automotive body/chassis electronics (sensors, lighting, actuators)
- Engine/powertrain sensors and control
- Industrial automation and motor control
- Instrumentation, data acquisition and measurement systems
- Building automation, HVAC and energy management
- Consumer electronics and home appliances
- Small robotics and general embedded control tasks
Package
80-pin LQFP (Plastic Quad Flat Pack) package.
