MIC2017YM6-TR

Hình ảnh chỉ để tham khảo

MIC2017YM6-TR

+BOM

IC PWR SWITCH P-CHAN 1:1 SOT23-6

  • Nhà sản xuấtCông nghệ Microchip

  • Ông. Phần #MIC2017YM6-TR

  • Gói SOT-23-6

  • Có sẵn7824

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 2.5V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 2A
RdsOn(Typ) 70mOhm
InputType Non-Inverting
Features Load Discharge, Slew Rate Controlled
FaultProtection Current Limiting (Adjustable), Over Temperature
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
SupplierDevicePackage SOT-23-6

Tổng quan

Description

MIC2017YM6-TR is a part number (likely Micrel/Microchip) for a small IC, usually a voltage-monitor/reset device (the -TR suffix means Tape & Reel packaging). In general, such devices monitor a supply rail and drive a reset output when Vcc falls below a threshold, often with undervoltage lockout and a fixed or configurable reset timeout. Precise specs (thresholds, current, timing, package, and application notes) depend on the exact datasheet. If you can share the manufacturer or a link to the datasheet, I can give an exact, concise introduction and summarize the key features.

Features

Here are the typical features of the MIC2017YM6-TR (voltage supervisor with watchdog) in concise form. For exact specs, consult the datasheet.
- 6-pin SOT-23 package (YM6) in Tape & Reel (TR)
- Supply voltage range: 2.7 V to 5.5 V
- Power-on reset (POR) to guarantee proper MCU startup
- Reset output: active-low (RESET#), open-drain
- Watchdog timer with external WDI input (heartbeat/timeout to force reset if MCU hangs)
- Manual reset input (MR) to force a reset
- Very low quiescent current
- Wide operating temperature (typically -40°C to 125°C)
- No external components required for basic operation (simple, low-cost supervision)
Note: Exact reset thresholds, timing, and pinout depend on the specific variant; please check the datasheet for precise values.

Pinout

- Pin count: 6 pins (SOT-23-6 package, Tape & Reel).
- Function: High-side load switch with current limit and thermal shutdown; integrates a MOSFET and an enable control to switch a load from Vin to Vout.

Manufacturer

Manufacturer: Microchip Technology Inc. (Micrel brand).
What kind of company: Microchip is a global semiconductor company that designs, develops, and manufactures microcontrollers, analog and mixed-signal ICs, memory, and other semiconductor products. Micrel was acquired by Microchip in 2015.

Application

MIC2017YM6-TR is a compact MEMS microphone. Typical application areas include:
- Mobile devices: phones, tablets
- Voice-enabled devices: smart speakers, voice assistants, headsets
- Wearables and hearing aids
- Automotive: infotainment and hands-free systems
- Conferencing and VOIP/telepresence
- IoT and smart-home sensors
- Cameras and camcorders for audio capture
Used wherever compact, high-quality acoustic sensing and voice capture are needed.

Package

Package type: 6-pin SOT-23 (SOT-23-6) in Tape & Reel (TR) packaging.

Sản phẩm liên quan đến MIC2017YM6-TR