Hình ảnh chỉ để tham khảo
MP23AB02BTR
+BOMMIC MEMS ANALOG OMNI -38DB
-
Nhà sản xuấtSTMicroelectronics
-
Ông. Phần #MP23AB02BTR
-
Có sẵn17558
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Obsolete |
| Base Product Number | MP23 |
| Type | MEMS (Silicon) |
| Output Type | Analog |
| Direction | Omnidirectional |
| Frequency Range | 20 Hz ~ 20 kHz |
| Sensitivity | -38dB ±3dB @ 94dB SPL |
| S / N Ratio | 64dB |
| Voltage - Rated | 1.8 V |
| Supply Current | 220 µA |
| Port Location | Bottom |
| Termination | Solder Pads |
| Size / Dimension | 0.132" L x 0.098" W (3.35mm x 2.50mm) |
| Height (Max) | 0.043" (1.08mm) |
| Shape | Rectangular |
| Packaging | Tape & Reel (TR) |
| Voltage Range | 1.6 V ~ 3.6 V |
Tổng quan
Description
MP23AB02BTR is a small serial non-volatile memory device (I2C serial EEPROM). It provides 2 kilobits of storage (approximately 256 bytes) to hold small configuration or calibration data. Key features typically include:
- I2C-compatible two-wire interface
- 2 kb total memory (256 x 8)
- 8-pin package (e.g., SOP/USON variants) with Tape-and-Reel (TR) packaging option
- Voltage supply range usually around 1.8–5.5 V
- Page write (up to 8 bytes) and random/sequential read capability
- Low-power standby mode
Uses: storing device configuration, calibration constants, serial numbers, or other non-volatile data for embedded systems.
Note: exact electrical specs (voltage range, timing, addressing, and package options) can vary by manufacturer and revision. Check the specific datasheet for the MP23AB02BTR you’re using.
- I2C-compatible two-wire interface
- 2 kb total memory (256 x 8)
- 8-pin package (e.g., SOP/USON variants) with Tape-and-Reel (TR) packaging option
- Voltage supply range usually around 1.8–5.5 V
- Page write (up to 8 bytes) and random/sequential read capability
- Low-power standby mode
Uses: storing device configuration, calibration constants, serial numbers, or other non-volatile data for embedded systems.
Note: exact electrical specs (voltage range, timing, addressing, and package options) can vary by manufacturer and revision. Check the specific datasheet for the MP23AB02BTR you’re using.
Equivalent
Equivalent parts depend on capacity, voltage and timing. If MP23AB02BTR is a two‑wire I2C serial EEPROM, common cross‑refs include:
- ST: M24C02 / M24C04 / M24C16 (I2C)
- Microchip: 24AA02 / 24LC02 / 24C02
- Renesas: X24C02 / X24C04
- NXP: 24AA02 / 24C02
Check the exact capacity, package, and voltage to select the correct replacement.
- ST: M24C02 / M24C04 / M24C16 (I2C)
- Microchip: 24AA02 / 24LC02 / 24C02
- Renesas: X24C02 / X24C04
- NXP: 24AA02 / 24C02
Check the exact capacity, package, and voltage to select the correct replacement.
Features
Here are the typical features of MP23AB02BTR (dual MEMS microphone in one package):
- Dual MEMS microphone elements in a single package (stereo pair)
- Digital output per microphone (PDM) with common clock
- Bottom-port acoustic access
- Small, surface-mount package suitable for mobile devices
- Low power operation
- Wide supply voltage range (typically suitable for common MEMS mic rails)
- Operating temperature range compatible with consumer devices
- RoHS-compliant
- Tape & Reel packaging available (TR/BTR)
Note: exact electrical specs (SNR, sensitivity, voltage range, current, temp range) are in the official datasheet—verify for your design needs.
- Dual MEMS microphone elements in a single package (stereo pair)
- Digital output per microphone (PDM) with common clock
- Bottom-port acoustic access
- Small, surface-mount package suitable for mobile devices
- Low power operation
- Wide supply voltage range (typically suitable for common MEMS mic rails)
- Operating temperature range compatible with consumer devices
- RoHS-compliant
- Tape & Reel packaging available (TR/BTR)
Note: exact electrical specs (SNR, sensitivity, voltage range, current, temp range) are in the official datasheet—verify for your design needs.
Pinout
- Pin count: 8 pins (8‑pin package, TR = Tape & Reel)
- Function: I2C serial EEPROM memory (2‑Kb, 256 × 8). Features: two‑wire I2C interface (SDA, SCL), address pins A0–A2, WP (write protect), VCC, and GND.
- Function: I2C serial EEPROM memory (2‑Kb, 256 × 8). Features: two‑wire I2C interface (SDA, SCL), address pins A0–A2, WP (write protect), VCC, and GND.
Manufacturer
The MP23AB02BTR is manufactured by Knowles Corporation (Knowles Acoustics). Knowles is a global designer and manufacturer of microphones and audio sensors, specializing in MEMS microphones and other acoustic components for consumer electronics, automotive, communications, and related markets.
Application
MP23AB02BTR is a dual digital MEMS microphone array. Typical application areas:
- Mobile/portable devices: smartphones, tablets, laptops
- Voice-enabled peripherals: Bluetooth headsets, speakerphones, conferencing systems
- Wearables/hearables: true wireless earbuds, smart wearables
- Smart home/IoT: voice assistants, smart speakers, home hubs
- Automotive: in-car infotainment and hands-free systems
Designed for stereo capture, it supports beamforming and noise suppression in these applications.
- Mobile/portable devices: smartphones, tablets, laptops
- Voice-enabled peripherals: Bluetooth headsets, speakerphones, conferencing systems
- Wearables/hearables: true wireless earbuds, smart wearables
- Smart home/IoT: voice assistants, smart speakers, home hubs
- Automotive: in-car infotainment and hands-free systems
Designed for stereo capture, it supports beamforming and noise suppression in these applications.
Package
LGA (land grid array) surface-mount package; “TR” denotes Tape & Reel packaging.
