Hình ảnh chỉ để tham khảo
MX25R4035FZUIH1
+BOMIC FLASH 4MBIT SPI/QUAD 8USON
-
Nhà sản xuấtMacronix
-
Ông. Phần #MX25R4035FZUIH1
-
Có sẵn7693
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | Macronix |
| Package | Tape & Reel (TR) |
| Series | MXSMIO™ |
| ProductStatus | Not For New Designs |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 4Mb (512K x 8) |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 108 MHz |
| WriteCycleTime-WordPage | 100µs, 4ms |
| Voltage-Supply | 1.65V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-UFDFN Exposed Pad |
Tổng quan
Description
Key points:
- Capacity: 4 Mbit (512 KB).
- Interface: Serial SPI with dual/quad I/O (QIO/QPI) modes for higher throughput.
- Voltage: 2.7–3.6 V supply.
- Memory organization: 256-byte page programming; sector/block erase (typical sectors ~4 KB; blocks larger, up to bulk erase).
- Features: Write enable/disable, status/config registers with block protection, Deep Power-Down, standard security options.
- Endurance/retention: typically tens of thousands of P/E cycles with long data retention (datasheet specifies endurance and retention for industrial use).
- Package: 8‑pin variant (UIH1) suitable for compact devices.
- Applications: boot ROM, firmware storage, data logging and other code/data storage in microcontrollers and SoCs.
For exact electrical specs, timing, command set, and package details, refer to the MX25R4035FZUIH1 datasheet.
Equivalent
- Winbond W25Q40BV / W25Q40DV
- Gigadevice GD25Q40B / GD25Q40C
- Micron N25Q040A
- ISSI IS25LP040D
- Spansion S25FL040
Check each datasheet for exact voltage, timing, and package compatibility.
Features
- Density: 4 Mbit (512 KB)
- Interface: Serial SPI with standard, Dual I/O, and Quad I/O/Quasi-Quad modes
- Voltage: 2.7–3.6 V
- Speed/read modes: Fast Read and Quad/Dual I/O Fast Read
- Organization: 256-byte page size; 4 KB sectors; larger blocks (typical 32 KB/64 KB blocks)
- Addressing: 24-bit addressing
- Write/erase: Page program; sector/block erase with write enable and protection features
- Security/protection: Sector/Block protection, WP# and status register protection
- Endurance/retention: ~100,000 erase cycles; data retention ~20 years
- Temperature: Industrial grade, typically -40 °C to 85 °C
- Package: 8-pin small-outline/leadframe package (industrial grade availability)
For exact timing, frequencies, and package variants, consult the official datasheet.
Pinout
- Function: Serial SPI flash memory (4 Mbit) for storing firmware/data; pins include CS, CLK, SI, SO, WP#, HOLD#, VCC, GND.
Manufacturer
- Company type: Taiwan-based semiconductor company that designs and manufactures non-volatile memory (e.g., NOR flash) and operates as an integrated device manufacturer (IDM) with its own fabrication facilities.
Application
- Boot code and firmware storage for MCUs/SoCs
- Firmware updates and patch storage (OTAs and provisioning)
- External code/data storage for embedded systems
- Data logging and parameter/config storage
- IoT devices, wearables, industrial controllers, and automotive electronics
- Consumer electronics, networking gear (routers, set‑top boxes), smart meters
- Secure, low‑power external storage in embedded platforms
Note: Designed for high-speed, reliable storage with Quad SPI interface suitable for compact, cost‑effective embedded systems.